Sediment sorting at the Sand Motor at storm and annual time scales

Abstract

Bed sediment composition, with a focus on the median grain size D 50 , was investigated at a large-scale nourishment (The ‘Sand Motor’) at the Dutch coast (∼21.5 million m 3 sand). Considerable alongshore heterogeneity of the bed composition ( D 50 ) was observed as the Sand Motor evolved over time with (1) coarsening of the exposed part of the Sand Motor (+90 to +150 μm) and (2) a depositional area with relatively fine material (50 μm finer) just North and South of the Sand Motor. The alongshore heterogeneity of the measured D 50 values was most evident outside the surfzone (i.e. seaward of MSL −4 m). Coarsening of the bed after construction of the Sand Motor was attributed to hydrodynamic sorting processes, because the alongshore heterogeneity of the D 50 showed a similar spatial pattern as the mean bed shear stresses. The observed alongshore heterogeneity of the D 50 and correlation of D 50 with modelled mean bed shear stresses suggest that preferential erosion of the finer sand fractions has taken place. The selective transport of finer sand fractions results in a coarser top layer of the bed at the Sand Motor. The preferential transport is most dominant during mild and moderate conditions when hydrodynamic forcing conditions are close to the critical bed shear stresses for transport. The measurements also show the impact of a storm, which consists of a ∼40 μm finer D 50 of the offshore bed composition in front of the Sand Motor (i.e. where a considerably coarser bed was in place). Additionally, storms may generate a (temporary) zone with fine bed material at the toe of the deposition profile. This means that the coarsening of the bed is reduced by storms as a result of the mobilization of both coarse and fine sediment and mixing of the bed with the relatively finer substrate.