The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Phase controllable synthesis of CuS nanoparticles by chemical co-precipitation method: Effect of copper precursors on the properties of CuS
Abstract
Abstract The studies focusing on the synthesis of CuS nanoparticles (NPs) by Chemical Co-Precipitation method (CCP) along with detailed growth mechanism are limited. In addition, the synthesis of CuS NPs in water solvent is highly encouraged as water is served as the best eco-friendly solvent. In the present report, taking the advantage of Cu+1 oxidation in the aqueous medium, CuS NPs were synthesized using CuCl and thiourea (Tu) via CCP in presence of naturally abundant water solvent under open atmosphere. In addition, the effect of different copper precursors (such as CuCl, CuCl2, and CuSO4 in combination with thiourea) and the mole ratio of Cu/S on the properties of CuS NPs were also investigated. XRD analysis showed the single-phase CuS for the combination of CuCl + Tu at Cu/S = 1:2 and CuCl2 (or CuSO4) + Tu at Cu/S = 1:1. For other growth conditions, copper-rich composition with mixed phases was observed. XPS analysis showed both +1 and + 2 oxidation states for copper in CuS NPs synthesized from CuCl and Tu at Cu/S = 1:2. The CuS NPs showed broad absorptions in the UV–Vis and NIR regions due to excitonic absorption and localized surface plasmon resonance (LSPR). The optical band gap energy of CuS NPs was varied in the range of 2.05–2.34 eV, depending on the type of copper precursor and Cu/S mole ratio used. The synthesized CuS NPs have potential applications in the visible solar light-driven dye degradation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Laurent, S., Forge, D., Port, M., Roch, A., Robic, C., Vander Elst, L., & Muller, R. N. (2008) · Chemical Reviews · doi:10.1021/cr068445e · Cited by 6,852
Cited by
Review of Metal Sulfide Nanostructures and their Applications
Jamal, F., Rafique, A., Moeen, S., Haider, J., Nabgan, W., Haider, A., Imran, M., Nazir, G., Alhassan, M., Ikram, M., et al. (2023) · ACS Applied Nano Materials · doi:10.1021/acsanm.3c00417 · Cited by 284
Metadata
- Authors
- Pejjai, B., Reddivari, M., & Kotte, T. R. R.
- Venue
- Materials Chemistry and Physics
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 239
- Pages
- 122030
- ISSN
- 0254-0584 (ISSN-L)
- OpenAlex
- W2967350236
- Cited by
- 187
- References
- 1
- FWCI
- 5.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Phase controllable synthesis of CuS nanoparticles by chemical co-precipitation method: Effect of copper precursors on the properties of CuS. https://app.cochat.ai/papers/10.1016/j.matchemphys.2019.122030
- The paper
- Pejjai, B., Reddivari, M., & Kotte, T. R. R. (2020). Phase controllable synthesis of CuS nanoparticles by chemical co-precipitation method: Effect of copper precursors on the properties of CuS. Materials Chemistry and Physics. https://doi.org/10.1016/j.matchemphys.2019.122030
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.