Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance
Open accessThe DOI matches its Crossref record.
Abstract
Multicomponent carbide thin films of (CrNbTaTiW)C (30–40 at.% C) with different metal contents were deposited at different temperatures using non-reactive DC magnetron sputtering. The lattice distortion for the metal lattice was estimated to vary from about 3 to 5%. Most films crystallized in the cubic B1 structure but Ta/W-rich films deposited at 600 °C exhibited a tetragonal distortion. X-ray diffraction results show that near-equimolar films exhibited a strong (111) texture. In contrast, Ta/W-rich films exhibited a shift from (111) to (100) texture at 450 °C. The in-plane relationship was determined to MC(111)[-12-1]//Al 2 O 3 (001)[110] with a lattice mismatch of about 11% along the Al 2 O 3 [110] direction. A segregation of Cr to the grain boundaries was observed in all films. The microstructure was found to be the most important factor for high hardness. Less dense Nb-rich and near-equimolar films deposited at low temperatures exhibited the lowest hardness (12 GPa), while very dense Ta/W-rich high temperature films were found to be the hardest (36 GPa). No correlation was found between the lattice distortion and the hardness. Corrosion studies revealed that the multicomponent films exhibited excellent corrosion resistance, superior to that of a reference hyper-duplex stainless steel, in 1.0 M HCl.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
George, E. P., Raabe, D., & Ritchie, R. O. (2019) · Nature Reviews Materials · doi:10.1038/s41578-019-0121-4 · Cited by 5,047
Oses, C., Toher, C., & Curtarolo, S. (2020) · Nature Reviews Materials · doi:10.1038/s41578-019-0170-8 · Cited by 2,081
High-entropy ceramics: Present status, challenges, and a look forward
Xiang, H., Xing, Y., Dai, F.-Z., Wang, H., Su, L., Miao, L., Zhang, G., Wang, Y., Qi, X., Yao, L., et al. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0477-y · Cited by 1,109
Wu, D., Kusada, K., Yamamoto, T., Toriyama, T., Matsumura, S., Gueye, I., Seo, O., Kim, J., Hiroi, S., Sakata, O., et al. (2020) · Chemical Science · doi:10.1039/d0sc02351e · Cited by 315
Metadata
- Authors
- Malinovskis, P., Fritze, S., Riekehr, L., von Fieandt, L., Cedervall, J., Rehnlund, D., Nyholm, L., Lewin, E., & Jansson, U.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-07
- Volume
- 149
- Pages
- 51-62
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2794777979
- Cited by
- 132
- References
- 0
- FWCI
- 9.46
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance. https://app.cochat.ai/papers/10.1016/j.matdes.2018.03.068
- The paper
- Malinovskis, P., Fritze, S., Riekehr, L., von Fieandt, L., Cedervall, J., Rehnlund, D., Nyholm, L., Lewin, E., & Jansson, U. (2018). Synthesis and characterization of multicomponent (CrNbTaTiW)C films for increased hardness and corrosion resistance. Materials & Design. https://doi.org/10.1016/j.matdes.2018.03.068
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.