The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction
Open accessAbstract
Abstract Selective laser melting (SLM) is a fast-growing technology which still lacks knowledge and management for wider industrial use. Numerical modeling is today a standard tool in the manufacturing industry to support design and process parameters determination. It is thus of great importance to experimentally validate the simulations in order to ensure their predictive capabilities. However, the fast nature of the process complicates observation of the quantities required for the simulation validation. A finite element model (FEM) of the SLM process is proposed here, together with its numerical validation by comparison with the literature, and experimental validation using high-speed imaging. The melt pool widths and lengths retrieved from the simulation and the videos were measured. The model demonstrated a good accordance with both the literature and the experimental results. Reduced melt pool geometries were simulated in the first tracks which led to lack of fusion defect formations.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Process defects and in situ monitoring methods in metal powder bed fusion: a review
Grasso, M., & Colosimo, B. M. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa5c4f · Cited by 833
Cited by
Defects and anomalies in powder bed fusion metal additive manufacturing
Mostafaei, A., Zhao, C., He, Y., Reza Ghiaasiaan, S., Shi, B., Shao, S., Shamsaei, N., Wu, Z., Kouraytem, N., Sun, T., et al. (2022) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100974 · Cited by 491
Multi-scale defects in powder-based additively manufactured metals and alloys
Fu, J., Li, H., Song, X., & Fu, M. W. (2022) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2022.02.015 · Cited by 391
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Zerbst, U., Bruno, G., Buffière, J.-Y., Wegener, T., Niendorf, T., Wu, T., Zhang, X., Kashaev, N., Meneghetti, G., Hrabe, N., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100786 · Cited by 263
Caprio, L., Demir, A. G., Previtali, B., & Colosimo, B. M. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.101029 · Cited by 85
“[35] and through single track morphological measurements by Yadroitsev et al.”
BackgroundSelf-citation
Metadata
- Authors
- Bruna-Rosso, C., Demir, A. G., & Previtali, B.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-10
- Volume
- 156
- Pages
- 143-153
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2809612304
- Cited by
- 158
- References
- 2
- FWCI
- 11.19
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction. https://app.cochat.ai/papers/10.1016/j.matdes.2018.06.037
- The paper
- Bruna-Rosso, C., Demir, A. G., & Previtali, B. (2018). Selective laser melting finite element modeling: Validation with high-speed imaging and lack of fusion defects prediction. Materials & Design. https://doi.org/10.1016/j.matdes.2018.06.037
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.