The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties
Open accessAbstract
Functionally Graded Porous Scaffold (FGPS) becomes an attractive candidate for bone graft due to its combination of better mechanical and biological requirements with the scaffold gradient to better mimic host tissue. This paper focuses on the graded change requirements of bio-porous scaffolds in terms of physical and mechanical properties. Gradients in three patterns (density, heterostructure and cell-size gradients) with Gyroid and Diamond unit cells were proposed based on Triply Periodic Minimal Surfaces (TPMS), and fabricated by Selective Laser Melting (SLM) using Ti-6Al-4V. Among them, cell-size gradient was described for the first time, realizing a variation of graded pore size on a specific way. Morphological properties of porous samples were characterized by micro-CT and SEM, followed by compressive tests for determining their mechanical behaviors. It was found that the TPMS method is an effective way to achieve gradients in multiple patterns which are comparable to natural tissue with respect to both continuous topology and interconnectivity. The porous surface area and pore size, could be controlled by the cell-size gradient without relatively density alteration, stabilizing the modulus and strength within 11% and 20%, respectively. Both Gyroid and Diamond structures possess a superior strength (152.6 MPa, 145.7 MPa) and comparable elastic modulus (3.8GPa) with natural cortical bone.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Taniguchi, N., Fujibayashi, S., Takemoto, M., Sasaki, K., Otsuki, B., Nakamura, T., Matsushita, T., Kokubo, T., & Matsuda, S. (2016) · Materials Science and Engineering: C · doi:10.1016/j.msec.2015.10.069 · Cited by 960
Heinl, P., Müller, L., Körner, C., Singer, R. F., & Müller, F. A. (2008) · Acta Biomaterialia · doi:10.1016/j.actbio.2008.03.013 · Cited by 815
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Yan, C., Hao, L., Hussein, A., & Young, P. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.06.024 · Cited by 717
Hollister, S. J., Maddox, R. D., & Taboas, J. M. (2002) · Biomaterials · doi:10.1016/s0142-9612(02)00148-5 · Cited by 715
Maskery, I., Aboulkhair, N. T., Aremu, A. O., Tuck, C. J., Ashcroft, I. A., Wildman, R. D., & Hague, R. J. M. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.06.013 · Cited by 706
Yan, C., Hao, L., Hussein, A., Young, P., & Raymont, D. (2014) · Materials & Design · doi:10.1016/j.matdes.2013.10.027 · Cited by 622
Minimal surface scaffold designs for tissue engineering
Kapfer, S. C., Hyde, S. T., Mecke, K., Arns, C. H., & Schröder-Turk, G. E. (2011) · Biomaterials · doi:10.1016/j.biomaterials.2011.06.012 · Cited by 579
Mathematically defined tissue engineering scaffold architectures prepared by stereolithography
Melchels, F. P. W., Bertoldi, K., Gabbrielli, R., Velders, A. H., Feijen, J., & Grijpma, D. W. (2010) · Biomaterials · doi:10.1016/j.biomaterials.2010.05.068 · Cited by 530
Bone tissue regeneration: the role of scaffold geometry
Zadpoor, A. A. (2015) · Biomaterials Science · doi:10.1039/c4bm00291a · Cited by 518
Cited by
Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices
Al-Ketan, O., & Abu Al-Rub, R. K. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201900524 · Cited by 887
A review of topology optimization for additive manufacturing: Status and challenges
ZHU, J., ZHOU, H., WANG, C., ZHOU, L., YUAN, S., & ZHANG, W. (2021) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2020.09.020 · Cited by 874
Feng, J., Fu, J., Yao, X., & He, Y. (2022) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/ac5be6 · Cited by 813
Additive manufacturing of functionally graded materials: A review
Zhang, C., Chen, F., Huang, Z., Jia, M., Chen, G., Ye, Y., Lin, Y., Liu, W., Chen, B., Shen, Q., et al. (2019) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138209 · Cited by 612
Inverse-designed spinodoid metamaterials
Kumar, S., Tan, S., Zheng, L., & Kochmann, D. M. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0341-6 · Cited by 444
Metadata
- Authors
- Liu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 160
- Pages
- 849-860
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2895539345
- Cited by
- 395
- References
- 32
- FWCI
- 15.35
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties. https://app.cochat.ai/papers/10.1016/j.matdes.2018.09.053
- The paper
- Liu, F., Mao, Z., Zhang, P., Zhang, D. Z., Jiang, J., & Ma, Z. (2018). Functionally graded porous scaffolds in multiple patterns: New design method, physical and mechanical properties. Materials & Design. https://doi.org/10.1016/j.matdes.2018.09.053
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.