The DOI matches its Crossref record; 45 of the 45 references it cites were found in a registry or an index.
Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis
Open accessAbstract
The influence of inherent imperfections should be systematically investigated to ensure the safety and utilization of additive manufacturing-fabricated multi-scale parts and structures. Herein, two different types of multi-layer lattice sandwich panels, BCC and BCCZ, are prepared by selective laser melting (SLM) using the AlSi10Mg material. X-ray micro-computed tomography (μ-CT) is employed to capture the realistic geometrical information of lattice struts. Based on the statistical characteristics, a novel finite element model is established, which considers the specific non-uniform distribution of geometrical imperfection. Uniaxial compressive tests are performed to evaluate the influence of defects and number of layers on the overall mechanical performance and energy absorption capability. The results reveal that the diameter deviation of struts is changed with the change of strut location and built angle. In terms of compressive modulus and initial crushing strength, the prediction results of the reconstruction model are consistent with experimental results as compared to the as-designed and statistical average models. The layer-by-layer crushing behavior is the main failure mode for the multi-layer lattice panels. With the increase of layers number, the densification strain and crash load efficiency increased, whereas the specific energy absorption gradually decreased due to the impact of boundary conditions and failure modes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellular solids: Structure and properties
Wolcott, M. P. (1990) · Materials Science and Engineering: A · doi:10.1016/0921-5093(90)90295-e · Cited by 5,926
Ultralight Metallic Microlattices
Schaedler, T. A., Jacobsen, A. J., Torrents, A., Sorensen, A. E., Lian, J., Greer, J. R., Valdevit, L., & Carter, W. B. (2011) · Science · doi:10.1126/science.1211649 · Cited by 1,784
Effective properties of the octet-truss lattice material
Deshpande, V. S., Fleck, N. A., & Ashby, M. F. (2001) · Journal of the Mechanics and Physics of Solids · doi:10.1016/s0022-5096(01)00010-2 · Cited by 1,741
A fast two-dimensional median filtering algorithm
Huang, T., Yang, G., & Tang, G. (1979) · IEEE Transactions on Acoustics, Speech, and Signal Processing · doi:10.1109/tassp.1979.1163188 · Cited by 1,390
The topological design of multifunctional cellular metals
Evans, A. G., Hutchinson, J. W., Fleck, N. A., Ashby, M. F., & Wadley, H. N. G. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00016-5 · Cited by 1,134
Biomechanics of cellular solids
Gibson, L. J. (2005) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2004.09.027 · Cited by 961
Al-Ketan, O., Rowshan, R., & Abu Al-Rub, R. K. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2017.12.006 · Cited by 941
Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness
Berger, J. B., Wadley, H. N. G., & McMeeking, R. M. (2017) · Nature · doi:10.1038/nature21075 · Cited by 914
Tancogne-Dejean, T., Spierings, A. B., & Mohr, D. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.05.054 · Cited by 806
Zhang, L., Feih, S., Daynes, S., Chang, S., Wang, M. Y., Wei, J., & Lu, W. F. (2018) · Additive manufacturing · doi:10.1016/j.addma.2018.08.007 · Cited by 780
Evaluations of cellular lattice structures manufactured using selective laser melting
Yan, C., Hao, L., Hussein, A., & Raymont, D. (2012) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2012.06.002 · Cited by 730
Zhang, L., & Attar, H. (2016) · Advanced Engineering Materials · doi:10.1002/adem.201500419 · Cited by 721
A new method for grey-level picture thresholding using the entropy of the histogram
Pun, T. (1980) · Signal Processing · doi:10.1016/0165-1684(80)90020-1 · Cited by 679
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 620
Smith, M., Guan, Z., & Cantwell, W. J. (2013) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2012.12.004 · Cited by 545
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Al-saedi, D. S. J., Masood, S. H., Faizan‐Ur‐Rab, M., Alomarah, A., & Ponnusamy, P. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.059 · Cited by 527
Selective laser melting (SLM) of AlSi12Mg lattice structures
Leary, M., Mazur, M., Elambasseril, J., McMillan, M., Chirent, T., Sun, Y., Qian, M., Easton, M., & Brandt, M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.127 · Cited by 525
Liu, L., Kamm, P., García-Moreno, F., Banhart, J., & Pasini, D. (2017) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2017.07.003 · Cited by 513
Wauthle, R., Vrancken, B., Beynaerts, B., Jorissen, K., Schrooten, J., Kruth, J.-P., & Van Humbeeck, J. (2015) · Additive Manufacturing · doi:10.1016/j.addma.2014.12.008 · Cited by 463
Maskery, I., Aremu, A. O., Parry, L., Wildman, R. D., Tuck, C. J., & Ashcroft, I. A. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.05.058 · Cited by 441
Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing
Campoli, G., Borleffs, M. S., Amin Yavari, S., Wauthle, R., Weinans, H., & Zadpoor, A. A. (2013) · Materials & Design · doi:10.1016/j.matdes.2013.01.071 · Cited by 404
Evaluation of topology-optimized lattice structures manufactured via selective laser melting
Xiao, Z., Yang, Y., Xiao, R., Bai, Y., Song, C., & Wang, D. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.01.023 · Cited by 380
A New Type of Low Density Material: Shellular
Han, S. C., Lee, J. W., & Kang, K. (2015) · Advanced Materials · doi:10.1002/adma.201501546 · Cited by 328
Energy absorption in lattice structures in dynamics: Experiments
Özdemir, Z., Hernández-Nava, E., Tyas, A., Warren, J. A., Fay, S., Goodall, R., Todd, I., & Askes, H. (2015) · International Journal of Impact Engineering · doi:10.1016/j.ijimpeng.2015.10.007 · Cited by 325
Review of Mechanics and Applications of Auxetic Structures
Mir, M., Ali, M. N., Sami, J., & Ansari, U. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/753496 · Cited by 324
Median Filtering in Constant Time
Perreault, S., & Hebert, P. (2007) · IEEE Transactions on Image Processing · doi:10.1109/tip.2007.902329 · Cited by 317
Gümrük, R., Mines, R. A. W., & Karadeniz, S. (2013) · Materials Science and Engineering A · doi:10.1016/j.msea.2013.07.070 · Cited by 288
On the performance of truss panels with Kagomé cores
Wang, J., Evans, A. G., Dharmasena, K., & Wadley, H. N. G. (2003) · International Journal of Solids and Structures · doi:10.1016/s0020-7683(03)00349-4 · Cited by 288
3D printed hierarchical honeycombs with shape integrity under large compressive deformations
Chen, Y., Li, T., Jia, Z., Scarpa, F., Yao, C.-W., & Wang, L. (2018) · Materials & Design · doi:10.1016/j.matdes.2017.10.028 · Cited by 284
Melancon, D., Bagheri, Z. S., Johnston, R. B., Liu, L., Tanzer, M., & Pasini, D. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.09.013 · Cited by 241
Amani, Y., Dancette, S., Delroisse, P., Simar, A., & Maire, E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.08.030 · Cited by 240
Zhao, S., Li, S. J., Wang, S. G., Hou, W. T., Li, Y., Zhang, L. C., Hao, Y. L., Yang, R., Misra, R. D. K., & Murr, L. E. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.02.060 · Cited by 239
Pyramidal lattice truss structures with hollow trusses
Queheillalt, D. T., & Wadley, H. N. G. (2005) · Materials Science and Engineering A · doi:10.1016/j.msea.2005.02.048 · Cited by 218
Direction and location dependency of selective laser melted AlSi10Mg specimens
Hitzler, L., Janousch, C., Schanz, J., Merkel, M., Heine, B., Mack, F., Hall, W., & Öchsner, A. Ö. (2016) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2016.11.029 · Cited by 210
A TPMS-based method for modeling porous scaffolds for bionic bone tissue engineering
Shi, J., Zhu, L., Li, L., Li, Z., Yang, J., & Wang, X. (2018) · Scientific Reports · doi:10.1038/s41598-018-25750-9 · Cited by 207
Crushing behavior of multi-layer metal lattice panel fabricated by selective laser melting
Li, C., Lei, H., Liu, Y., Zhang, X., Xiong, J., Zhou, H., & Fang, D. (2018) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2018.07.029 · Cited by 191
Self-citationHigh specific strength and stiffness structures produced using selective laser melting
Challis, V. J., Xu, X., Zhang, L., Roberts, A. P., Grotowski, J. F., & Sercombe, T. B. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.05.064 · Cited by 169
Hierarchical chirality transfer in the growth of Towel Gourd tendrils
Wang, J.-S., Wang, G., Feng, X.-Q., Kitamura, T., Kang, Y.-L., Yu, S.-W., & Qin, Q.-H. (2013) · Scientific Reports · doi:10.1038/srep03102 · Cited by 167
Static behavior of lattice structures produced via direct metal laser sintering technology
Crupi, V., Kara, E., Epasto, G., Guglielmino, E., & Aykul, H. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.09.003 · Cited by 157
The Mechanical Properties of Sandwich Structures Based on Metal Lattice Architectures
Shen, Y., McKown, S., Tsopanos, S., Sutcliffe, C. J., Mines, R. A. W., & Cantwell, W. J. (2009) · Journal of Sandwich Structures & Materials · doi:10.1177/1099636209104536 · Cited by 151
GÖRGÜLÜARSLAN, R. M., Choi, S.-K., & Saldaña, C. (2017) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2017.04.011 · Cited by 66
TAKANO, N., Takizawa, H., Wen, P., Odaka, K., Matsunaga, S., & Abe, S. (2017) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2017.08.060 · Cited by 62
González, F. J. Q., & Nuño, N. (2015) · Computer Methods in Biomechanics & Biomedical Engineering · doi:10.1080/10255842.2015.1075009 · Cited by 38
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Self-citationChen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Self-citationKhan, N., & Riccio, A. (2024) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2024.101021 · Cited by 486
State-of-the-art of selective laser melting process: A comprehensive review
Sefene, E. M. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.04.002 · Cited by 429
Metadata
- Authors
- Lei, H., Li, C., Meng, J., Zhou, H., Liu, Y., Zhang, X., Wang, P., & Fang, D.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 169
- Pages
- 107685
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W2919860938
- Cited by
- 331
- References
- 45
- FWCI
- 21.35
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.