The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
3D-printed ceramic triply periodic minimal surface structures for design of functionally graded bone implants
Open accessAbstract
Stress shielding is one of the main problems that lead to bone resorption and revision surgery after implantation. Most of the commercially available metallic non-porous bone implants have a much greater stiffness than the native human bones and are prone to cause stress-shielding. With an open cell structure and intricate architecture, hyperbolic minimal surfaces offer several advantages such as less stress concentration, high permeability and high surface area to volume ratio, thus providing an ideal environment for cell adhesion, migration, and proliferation. This paper explores the use of porous bone implant design based on Triply Periodic Minimal Surfaces (TPMS) which is additively manufactured with ceramic material (Alumina) using Lithography-based Ceramics Manufacturing (LCM) technology. A total of 12 different primitive surface structure unit cells with pore size in the range of 500–1000 μm and porosity above 50% were considered. This is one of the earliest studies reporting the 3D printing of TPMS-based structures using ceramic material. Our results suggest that the choice of material and a porous TPMS-based design led to fabrication of structures with a much lesser compressive modulus comparable with the native bone and hence could potentially be adopted for bone implant design to mitigate the stress-shielding effect.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Trabecular bone modulus–density relationships depend on anatomic site
Morgan, E. F., Bayraktar, H. H., & Keaveny, T. M. (2003) · Journal of Biomechanics · doi:10.1016/s0021-9290(03)00071-x · Cited by 1,209
Cited by
Chen, L.-Y., Liang, S.-X., Liu, Y., & Zhang, L.-C. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100648 · Cited by 603
Design, printing, and engineering of regenerative biomaterials for personalized bone healthcare
Jia, Z., Xu, X., Zhu, D., & Zheng, Y. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101072 · Cited by 176
Metadata
- Authors
- Vijayavenkataraman, S., Kuan, L. Y., & Lu, W. F.
- Venue
- Materials & Design
- Publisher
- Elsevier BV
- Published
- 2020-06
- Volume
- 191
- Pages
- 108602
- ISSN
- 0264-1275 (ISSN-L)
- OpenAlex
- W3006886076
- Cited by
- 200
- References
- 1
- FWCI
- 12.86
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: 3D-printed ceramic triply periodic minimal surface structures for design of functionally graded bone implants. https://app.cochat.ai/papers/10.1016/j.matdes.2020.108602
- The paper
- Vijayavenkataraman, S., Kuan, L. Y., & Lu, W. F. (2020). 3D-printed ceramic triply periodic minimal surface structures for design of functionally graded bone implants. Materials & Design. https://doi.org/10.1016/j.matdes.2020.108602
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.