CoChat
Sign Up
Cited by 75High-Temperature Coating BehaviorsHigh Temperature Alloys and CreepIntermetallics and Advanced Alloy Properties

The DOI matches its Crossref record.

Influence of alloying elements on hot corrosion resistance of nickel-based single crystal superalloys coated with Na2SO4 salt at 900 °C

Open access
Song, Peng, Liu, Mingfeng, Jiang, Xiangwei, Feng, Yuchao, Wu, Junjie, Zhang, Gong, Wang, Dong, Dong, Jiasheng, Chen, Xing-Qiu, Lou, Langhong·2021·Materials & Design
DOI 10.1016/j.matdes.2020.109197
Open this paper in CoChat — free accountOpen PDF

Abstract

Hot corrosion behavior of three nickel-based single crystal superalloys with different key alloying elements (including Re, Cr, Al and Ti) contents in molten Na2SO4 salt at 900 °C was investigated. Comparative study of hot corrosion resistance was conducted on two Re-free superalloys with 12 wt% Cr and different content of Al and Ti. By further adding Re, the experimental alloy with moderate Cr content (8.5 wt%) and Al/Ti > 1 in the present research also exhibited excellent hot corrosion resistance. The influence mechanism of Re on promoting hot corrosion resistance was attempted to be explored in combined with first-principle calculation. In addition, the potential design space of new-developed single crystal superalloys was also proposed.

Overview

Integrity signals

Registry

Crossref · 10.1016/j.matdes.2020.109197

Cites

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Aluminum is prone to form corresponding oxides in the oxidating atmosphere at elevated temperatures due to its relatively low standard free energy.

    “Aluminum is prone to form corresponding oxides in the oxidating atmosphere at elevated temperatures due to its relatively low standard free energy [104].”

    From A review on molten sulfate salts induced hot corrosion (2021) · cites this paper as [104]

Citations

Cites

No references could be resolved yet.

Research works printed but not linked: 36

  1. Konter, 2001, Materials and manufacturing of advanced industrial gas turbine components, J. Mater. Process. Technol., 117, 386, 10.1016/S0924-0136(01)00785-3 · DOI
  2. Luo, 2019, Research and application progress in casting superalloys for industrial gas turbine blades, J. Mater. Eng., 47, 34
  3. Singh, 2014, Advanced materials for land based gas turbines, Trans. Indian Inst. Metals, 67, 601, 10.1007/s12666-014-0398-3 · DOI
  4. Hashizume, 2007, Development of novel Ni-based single crystal superalloys for power-generation gas turbines, Mater. High Temp., 24, 163, 10.3184/096034007X298516 · DOI
  5. Lortrakul, 2014, Investigation of the mechanisms of type-II hot corrosion of superalloy CMSX-4, Corros. Sci., 80, 408, 10.1016/j.corsci.2013.11.048 · DOI
  6. Pettit, 2011, Hot corrosion of metals and alloys, Oxid. Met., 76, 1, 10.1007/s11085-011-9254-6 · DOI · Paper page
  7. Reed, 2012, A new single crystal superalloy for power generation applications, Superalloys, 2012, 197, 10.7449/2012/Superalloys_2012_197_204 · DOI
  8. Sulzer, 2020, The effects of chemistry variations in new nickel-based superalloys for industrial gas turbine applications, Metall. Mater. Trans. A, 51A, 4902, 10.1007/s11661-020-05845-7 · DOI
  9. Chen, 2019, Influence of Cr content on hot corrosion and a special tube sealing test of single crystal nickel base superalloy, Corros. Sci., 156, 161, 10.1016/j.corsci.2019.05.001 · DOI · Paper page
  10. Matsugi, 1992, Alloying effects of Cr and Re on the hot-corrosion of nickel-based single-crystal superalloys coated with a Na2SO4-NaCl salt, J. Iron Steel Inst. Jpn., 78, 821, 10.2355/tetsutohagane1955.78.5_821 · DOI
  11. Chang, 2016, Effect of Re and Ta on hot corrosion resistance of nickel-base single crystal superalloys, Superalloys, 2016, 177
  12. Pfennig, 2008, Oxidation of single crystal PWA 1483 at 950 °C in flowing air, Corros. Sci., 50, 2484, 10.1016/j.corsci.2008.06.033 · DOI
  13. Erickson, 1996, The development of the CMSX-11B and CMSX-11C alloys for industrial gas turbine application, Superalloys 1996, 45
  14. Hohenberg, 1964, Density functional theory (DFT), Phys. Rev., 136, B864, 10.1103/PhysRev.136.B864 · DOI · Paper page
  15. Kohn, 1965, Self-consistent equations including exchange and correlation effects, Phys. Rev., 140, A1133, 10.1103/PhysRev.140.A1133 · DOI · Paper page
  16. Kresse, 1993, Ab initio molecular dynamics for liquid metals, Phys. Rev. B, 47, 558, 10.1103/PhysRevB.47.558 · DOI
  17. Kresse, 1996, Self-interaction correction to density functional approximation for many electron systems, Phys. Rev. B, 54, 11169, 10.1103/PhysRevB.54.11169 · DOI · Paper page
  18. Blöchl, 1994, Projector augmented-wave method, Phys. Rev. B, 50, 17953, 10.1103/PhysRevB.50.17953 · DOI · Paper page
  19. Perdew, 1996, Generalized gradient approximation made simple, Phys. Rev. Lett., 77, 3865, 10.1103/PhysRevLett.77.3865 · DOI · Paper page
  20. Goebel, 1970, Na2SO4-induced accelerated oxidation (hot corrosion) of nickel, Metall. Trans., 1, 1943, 10.1007/BF02642794 · DOI · Paper page
  21. Chang, 2017, Interaction of Ta and Cr on type-I hot corrosion resistance of single crystal Ni-base superalloys, Corros. Sci., 117, 35, 10.1016/j.corsci.2017.01.011 · DOI
  22. Stringer, 1987, High-temperature corrosion of superalloys, Mater. Sci. Technol., 3, 482, 10.1080/02670836.1987.11782259 · DOI
  23. Rapp, 2002, Hot corrosion of materials: a fluxing mechanism?, Corros. Sci., 44, 209, 10.1016/S0010-938X(01)00057-9 · DOI · Paper page
  24. Chang, 2018, Effect of Rhenium addition on hot corrosion resistance of Ni-based single crystal Superalloys, Metall. Mater. Trans. A, 49A, 4343, 10.1007/s11661-018-4711-3 · DOI · Paper page
  25. Baler, 2020, Effects of Ti and Cr additions in a Co–Ni–Al–Mo–Nb-based Superalloy, Superalloys, 2020, 929
  26. Hwang, 1990, Synergistic dissolution of oxides in molten sodium sulfate, J. Electrochem. Soc., 137, 1276, 10.1149/1.2086647 · DOI · Paper page
  27. Garip, 2020, Prediction modeling of type-I hot corrosion performance of Ti-Al-Mo-X (X=Cr, Mn) alloys in (Na, K)2SO4 molten salt mixture environment at 900 °C, J. Alloys Compd., 843, 156010, 10.1016/j.jallcom.2020.156010 · DOI
  28. Prashar, 2020, Hot corrosion behavior of super alloys, Mater. Today: Proceedings, 26, 1131
  29. Chung, 2020, Effects of Cr on the properties of multicomponent cobalt-based superalloys with ultra high g’ volume fraction, J. Alloys Compd., 832, 154790, 10.1016/j.jallcom.2020.154790 · DOI
  30. Li, 2017, Evolution of micro-pores in a single-crystal nickel-based superalloy during solution heat treatment, Metallurgical & Materials Transactions A, 48, 2682, 10.1007/s11661-017-4057-2 · DOI
  31. Eyring, 1935, The activated complex in chemical reactions, J.Chem.Phys, 3, 107, 10.1063/1.1749604 · DOI
  32. Vineyard, 1957, Frequency factors and isotope effects in solid state rate processes, J. Phys. Chem. Solids, 3, 121, 10.1016/0022-3697(57)90059-8 · DOI
  33. Henkelman, 2000, A climbing image nudged elastic band method for finding saddle points and minimum energy paths, J.Chem.Phys, 113, 9901, 10.1063/1.1329672 · DOI
  34. Sheppard, 2008, Optimization methods for finding minimum energy paths, J.Chem.Phys, 128, 134106, 10.1063/1.2841941 · DOI
  35. Feng, 2018, High-throughput modeling of atomic diffusion migration energy barrier of fcc metals, Prog. Nat. Sci-Mater, 29, 341, 10.1016/j.pnsc.2019.02.007 · DOI
  36. Xie, 1994, Atomistic structure and lattice effects of vacancies in ni-al intermetallics, J. Mater. Res., 9, 875, 10.1557/JMR.1994.0875 · DOI

Cited by

Sorted by citations

Metadata

Authors
Song, P., Liu, M., Jiang, X., Feng, Y., Wu, J., Zhang, G., Wang, D., Dong, J., Chen, X.-Q., & Lou, L.
Affiliations
  • University of Science and Technology of China (CN)
  • Chinese Academy of Sciences (CN)
Corresponding author
Jiang, Xiangwei
ORCID
Venue
Materials & Design
Publisher
Elsevier BV
Published
2021-01
Volume
197
Pages
109197
ISSN
0264-1275 (ISSN-L)
DOI
10.1016/j.matdes.2020.109197
OpenAlex
W3091261429
Cited by
75
References
0
Citations by year
2026: 16 · 2025: 9 · 2024: 16 · 2023: 15 · 2022: 10 · 2021: 9
FWCI
5.11
Type
journal article
Language
en
Open access
Licence
Locations
  • Materials & Design (publishedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National Natural Science Foundation of China (51631008, 51674235, 51725103)
  • National Key Research and Development Program of China (2016YFB0701403)
  • National Major Science and Technology Projects of China (2017-VI-0019-0019, 2017-VII-0008-0101)
Topics
  • Physical Sciences › Materials Science › Surfaces, Coatings and Films › High-Temperature Coating Behaviors
  • Physical Sciences › Engineering › Mechanical Engineering › High Temperature Alloys and Creep
  • Physical Sciences › Engineering › Mechanical Engineering › Intermetallics and Advanced Alloy Properties
Keywords
hot corrosion, nickel-based single crystal superalloy, rhenium, chromium, aluminum, titanium, alloying elements, corrosion resistance, first-principles calculations

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review