Thermal debinding for stereolithography additive manufacturing of advanced ceramic parts: A comprehensive review

3D printing of ceramics: A review

Chen, Z., Li, Z., Li, J., Liu, C., Lao, C., Fu, Y., Liu, C., Li, Y., Wang, P., & He, Y. N. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.11.013 · Cited by 2,191

Colloidal Processing of Ceramics

Lewis, J. A. (2000) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.2000.tb01560.x · Cited by 1,404

Additive manufacturing of advanced ceramic materials

Lakhdar, Y., Tuck, C. J., Binner, J. G. P., Terry, A., & Goodridge, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100736 · Cited by 914

Freeform fabrication of ceramics via stereolithography

Griffith, M. L., & Halloran, J. W. (1996) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1996.tb09022.x · Cited by 815

Additive manufacturing of structural materials

Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2020.100596 · Cited by 723

A comprehensive review of the photopolymerization of ceramic resins used in stereolithography

Zakeri, S., Vippola, M., & Levänen, E. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101177 · Cited by 499

Additive manufacturing by digital light processing: a review

Chaudhary, R., Fabbri, P., Leoni, E., Mazzanti, F., Akbari, R., & Antonini, C. (2022) · Progress in Additive Manufacturing · doi:10.1007/s40964-022-00336-0 · Cited by 473

A review of additive manufacturing of metamaterials and developing trends

Fan, J., Zhang, L., Wei, S., Zhang, Z., Choi, S.-K., Song, B., & Shi, Y. (2021) · Materials Today · doi:10.1016/j.mattod.2021.04.019 · Cited by 453

Additive manufacturing of ceramics for dental applications: A review

Galante, R., Figueiredo-Pina, C. G., & Serro, A. P. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.026 · Cited by 448

The recent development of vat photopolymerization: A review

Zhang, F., Zhu, L., Li, Z., Wang, S., Shi, J., Tang, W., Li, N., & Yang, J. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102423 · Cited by 378

Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method

He, R., Liu, W., Wu, Z., An, D., Huang, M., Wu, H., Jiang, Q., Ji, X., Wu, S., & Xie, Z. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.11.135 · Cited by 357

Ceramic Robocasting: Recent Achievements, Potential, and Future Developments

Peng, E., Zhang, D., & Ding, J. (2018) · Advanced Materials · doi:10.1002/adma.201802404 · Cited by 348

3D printing restorative materials using a stereolithographic technique: a systematic review

Bona, Á. D., Cantelli, V., Britto, V. T., Collares, K., & Stansbury, J. W. (2021) · Dental Materials · doi:10.1016/j.dental.2020.11.030 · Cited by 339

Vat photopolymerization of polymers and polymer composites: Processes and applications

Rashid, A. A., Ahmed, W., Khalid, M. Y., & Koç‬, M. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102279 · Cited by 330

Progress and challenges towards additive manufacturing of SiC ceramic

He, R., Zhou, N., Zhang, K., Zhang, X., Zhang, L., Wang, W., & Fang, D. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0484-z · Cited by 327

High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing

Zhang, K., Xie, C., Wang, G., He, R., Ding, G., Wang, M., Dai, D., & Fang, D. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.09.152 · Cited by 313

Photopolymerization-based additive manufacturing of ceramics: A systematic review

Rasaki, S. A., Xiong, D., Xiong, S., Su, F., Idrees, M., & Chen, Z. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0468-z · Cited by 302

A review of 3D printed porous ceramics

Zhang, F., Li, Z., Xu, M., Wang, S., Li, N., & Yang, J. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.02.039 · Cited by 289

Stereolithography of structural complex ceramic parts

Chartier, T., Chaput, C., Doreau, F., & Loiseau, M. (2002) · Journal of Materials Science · doi:10.1023/a:1016102210277 · Cited by 277

A review on fabricating tissue scaffolds using vat photopolymerization

Chartrain, N. A., Williams, C. B., & Whittington, A. R. (2018) · Acta Biomaterialia · doi:10.1016/j.actbio.2018.05.010 · Cited by 276

A review on the rheological behavior and formulations of ceramic suspensions for vat photopolymerization

de Camargo, Í. L., Morais, M. M., Fortulan, C. A., & Branciforti, M. C. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.031 · Cited by 273

A review on additive manufacturing of ceramic matrix composites

Sun, J., Ye, D., Zou, J., Chen, X., Wang, Y., Yuan, J., Liang, H., Qu, H., Binner, J. G. P., & Bai, J. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.06.039 · Cited by 268

Additive Manufacturing of Polymer-Derived Ceramics: Materials, Technologies, Properties and Potential Applications

Chaudhary, R. P., Parameswaran, C., Idrees, M., Rasaki, A. S., Liu, C.-Y., Chen, Z.-W., & Colombo, P. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100969 · Cited by 266

Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography

Wu, H., Cheng, Y., Liu, W., He, R., Zhou, M., Wu, S., Song, X., & Chen, Y. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.08.024 · Cited by 249

Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches

Santoliquido, O., Colombo, P., & Ortona, A. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.01.044 · Cited by 244

Two‐photon stereolithography for realizing ultraprecise three‐dimensional nano/microdevices

Park, S. ‐., Yang, D., & Lee, K. ‐. (2008) · Laser & Photonics Review · doi:10.1002/lpor.200810027 · Cited by 238

Dispersion and stability of SiC ceramic slurry for stereolithography

Ding, G., He, R., Zhang, K., Xia, M., Feng, C., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.10.203 · Cited by 229

Stereolithography: A new method for processing dental ceramics by additive computer-aided manufacturing

Dehurtevent, M., Robberecht, L., Hornez, J., Thuault, A., Deveaux, É., & Béhin, P. (2017) · Dental Materials · doi:10.1016/j.dental.2017.01.018 · Cited by 228

Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography – Optimization of the drying and debinding processes

Zhou, M., Liu, W., Wu, H., Song, X., Chen, Y., Cheng, L., He, F., Chen, S., & Wu, S. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.04.050 · Cited by 223

Thermal decomposition of energetic materials using TG-FTIR and TG-MS: a state-of-the-art review

Benhammada, A., & Trache, D. (2019) · Applied Spectroscopy Reviews · doi:10.1080/05704928.2019.1679825 · Cited by 213

Effect of surface treatment on the dispersion of nano zirconia particles in non-aqueous suspensions for stereolithography

Sun, J., Binner, J. G. P., & Bai, J. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.10.024 · Cited by 203

Study on surface quality, precision and mechanical properties of 3D printed ZrO2 ceramic components by laser scanning stereolithography

Xing, H., Zou, B., Li, S., & Fu, X. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.09.007 · Cited by 200

The effect of the surfactants on the formulation of UV-curable SLA alumina suspension

Li, K., & Zhao, Z. (2016) · Ceramics International · doi:10.1016/j.ceramint.2016.11.143 · Cited by 197

Influence of Resin Composition on the Defect Formation in Alumina Manufactured by Stereolithography

Johansson, E., Lidström, O., Johansson, J., Lyckfeldt, O., & Adolfsson, E. (2017) · Materials · doi:10.3390/ma10020138 · Cited by 194

Fabrication of SiC ceramic architectures using stereolithography combined with precursor infiltration and pyrolysis

He, R., Ding, G., Zhang, K., Li, Y., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.04.100 · Cited by 193

Effect of the volume fraction of zirconia suspensions on the microstructure and physical properties of products produced by additive manufacturing

Jang, K.-J., Kang, J. H., Fisher, J. G., & Park, S.-W. (2019) · Dental Materials · doi:10.1016/j.dental.2019.02.001 · Cited by 179

3D printing of zirconia via digital light processing: optimization of slurry and debinding process

Sun, J., Binner, J. G. P., & Bai, J. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.05.079 · Cited by 176

BINDER REMOVAL FROM CERAMICS

Lewis, J. A. (1997) · Annual Review of Materials Science · doi:10.1146/annurev.matsci.27.1.147 · Cited by 171

3D/4D printed bio-piezoelectric smart scaffolds for next-generation bone tissue engineering

Chen, A., Su, J. D., Li, Y., Zhang, H., Shi, Y., Yan, C., & Lü, J. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acd88f · Cited by 170

Colloidal processing: enabling complex shaped ceramics with unique multiscale structures

Franks, G. V., Tallón, C., Studart, A. R., Sesso, M. L., & Leo, S. (2017) · Journal of the American Ceramic Society · doi:10.1111/jace.14705 · Cited by 168

Photosensitive ZrO2 suspensions for stereolithography

Zhang, K., He, R., Xie, C., Wang, G., Ding, G., Wang, M., Song, W., & Fang, D. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.03.123 · Cited by 167

Study on defect-free debinding green body of ceramic formed by DLP technology

Wang, K., Qiu, M., Jiao, C., Gu, J., Xie, D., Wang, C., Tang, X., Wei, Z. Y., & Shen, L. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.237 · Cited by 167

Effects of fine grains and sintering additives on stereolithography additive manufactured Al2O3 ceramic

Zhang, K., He, R., Ding, G., Bai, X., & Fang, D. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.071 · Cited by 165

Stereolithography 3D printing of SiC ceramic with potential for lightweight optical mirror

Ding, G., He, R., Zhang, K., Zhou, N., & Xu, H. J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.04.196 · Cited by 163

Stereolithography-based additive manufacturing of lightweight and high-strength Cf/SiC ceramics

Zhang, H., Yang, Y. P., Hu, K., Liu, B., Liu, M., & Huang, Z. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101199 · Cited by 156

Effect of particle size distribution on the preparation of ZTA ceramic paste applying for stereolithography 3D printing

Xing, H., Zou, B., Liu, X., Wang, X., Chen, Q., Fu, X., & Li, Y. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.09.066 · Cited by 152

A review of defects in vat photopolymerization additive-manufactured ceramics: Characterization, control, and challenges

Zhang, K., Meng, Q., Qu, Z., & He, R. (2023) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2023.10.067 · Cited by 152

Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent

Xing, H., Zou, B., Lai, Q., Huang, C., Chen, Q., Fu, X., & Shi, Z. (2018) · Powder Technology · doi:10.1016/j.powtec.2018.07.023 · Cited by 146

Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method

Huang, R., Jiang, Q., Wu, H., Li, Y., Liu, W., Lu, X., & Wu, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.11.116 · Cited by 144

Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces

Al‐Ketan, O., Pelanconi, M., Ortona, A., & Al‐Rub, R. K. A. (2019) · Journal of the American Ceramic Society · doi:10.1111/jace.16474 · Cited by 142

Additive manufacturing of cellular ceramic structures: From structure to structure–function integration

Zhang, X., Zhang, K., Zhang, L., Wang, W., Li, Y., & He, R. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110470 · Cited by 140

PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application

Chen, Y., Bao, X., Wong, C.-M., Cheng, J. H., Wu, H., Song, H., Ji, X., & Wu, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.09.055 · Cited by 140

Digital light processing of 3Y-TZP strengthened ZrO2 ceramics

Zhang, K., He, R., Ding, G., Feng, C., Song, W., & Fang, D. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138768 · Cited by 138

The status, barriers, challenges, and future in design for 4D printing

Demoly, F., Dunn, M. L., Wood, K. L., Qi, H. J., & André, J. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110193 · Cited by 136

Surface modification of α-Al2O3 with dicarboxylic acids for the preparation of UV-curable ceramic suspensions

Zhang, S., Sha, N., & Zhao, Z. (2016) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.12.013 · Cited by 136

Review: Thermal Debinding Process in Particulate Materials Processing

Enneti, R. K., Park, S. J., German, R. M., & Atre, S. V. (2011) · Materials and Manufacturing Processes · doi:10.1080/10426914.2011.560233 · Cited by 135

Stereolithography of ceramic suspensions

Brady, G. A., & Halloran, J. W. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710176680 · Cited by 132

Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology

Shuai, X., Zeng, Y., Li, P., & Chen, J. (2020) · Journal of Materials Science · doi:10.1007/s10853-020-04503-y · Cited by 128

Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography

Song, S. Y., Park, M. S., Lee, D., Lee, J. W., & Yun, J. S. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107960 · Cited by 127

Evolution of the microstructure and mechanical properties of stereolithography formed alumina cores sintered in vacuum

Li, H., Liu, Y., Liu, Y., Zeng, Q., Wang, J., Hu, K., Lu, Z., & Liang, J. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.11.047 · Cited by 123

Inter-particle interactions of alumina powders in UV-curable suspensions for DLP stereolithography and its effect on rheology, solid loading, and self-leveling behavior

Xu, X., Zhou, S., Wu, J., Zhang, C., & Liu, X. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.12.004 · Cited by 121

Modeling sintering anisotropy in ceramic stereolithography of silica

Manière, C., Kerbart, G., Harnois, C., & Marinel, S. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.10.032 · Cited by 119

3D‐Printed Micro/Nano‐Scaled Mechanical Metamaterials: Fundamentals, Technologies, Progress, Applications, and Challenges

Su, R., Chen, J., Zhang, X., Wang, W., Li, Y., He, R., & Fang, D. (2023) · Small · doi:10.1002/smll.202206391 · Cited by 116

Effect of plasticizer on the fabrication and properties of alumina ceramic by stereolithography-based additive manufacturing

Xing, Z., Liu, W., Chen, Y., & Li, W. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.07.259 · Cited by 115

Influence of Residual Monomer on Cracking in Ceramics Fabricated by Stereolithography

Bae, C., & Halloran, J. W. (2010) · International Journal of Applied Ceramic Technology · doi:10.1111/j.1744-7402.2010.02578.x · Cited by 112

Recent advances in the stereolithographic three-dimensional printing of ceramic cores: Challenges and prospects

Li, J., An, X., Liang, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.10.041 · Cited by 111

Research progress of the defects and innovations of ceramic vat photopolymerization

Wu, X., Teng, J., Ji, X., Xu, C., Ma, D., Sui, S., & Zhang, Z. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103441 · Cited by 111

Effects of slurry mixing methods and solid loading on 3D printed silica glass parts based on DLP stereolithography

Cai, P., Liang, G., Wang, H., Li, J., Li, J., Qiu, Y., Zhang, Q., & Lue, Q. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.03.260 · Cited by 109

Enhanced comprehensive properties of stereolithography 3D printed alumina ceramic cores with high porosities by a powder gradation design

Li, X., Su, H., Dong, D., Zhao, D., Liu, Y., Shen, Z., Jiang, H., Guo, Y., Liu, H., Fan, G., et al. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2022.04.040 · Cited by 107

Influence of debinding holding time on mechanical properties of 3D-printed alumina ceramic cores

Li, H., Liu, Y., Liu, Y., Zeng, Q., Hu, K., Lü, Z., Liang, J., & Li, J. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.10.061 · Cited by 105

Influence of Al2O3 content on mechanical properties of silica-based ceramic cores prepared by stereolithography

Zheng, W. H., Wu, J., Chen, S., Wang, C., Liu, C.-L., Hua, S., Yu, K.-B., Zhang, J., Zhang, J., & Shi, Y. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0513-y · Cited by 105

Stereolithography-Based Additive Manufacturing of High-Performance Osteoinductive Calcium Phosphate Ceramics by a Digital Light-Processing System

Wei, Y., Zhao, D., Cao, Q., Wang, J., Wu, Y., Yuan, B., Li, X., Chen, X., Zhou, Y., Yang, X., et al. (2020) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.9b01663 · Cited by 103

A comprehensive study of dense zirconia components fabricated by additive manufacturing

Sun, J., Chen, X., Wade, J., Binner, J. G. P., & Bai, J. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.101994 · Cited by 99

A study on biosafety of HAP ceramic prepared by SLA-3D printing technology directly

Chen, Q., Zou, B., Lai, Q., Wang, Y., Xue, R., Xing, H., Fu, X., Huang, C., & Yao, P. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.06.031 · Cited by 98

Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics

Li, H., Liu, Y., Liu, Y., Zeng, Q., Hu, K., Lu, Z., & Liang, J. (2020) · Materials Characterization · doi:10.1016/j.matchar.2020.110548 · Cited by 98

Formation mechanism of stereolithography of Si3N4 slurry using silane coupling agent as modifier and dispersant

Liu, Y., Cheng, L., Li, H., Li, Q., Shi, Y., Liu, F., Wu, Q., & Liu, S. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.02.258 · Cited by 95

Stereolithographical fabrication of dense Si3N4 ceramics by slurry optimization and pressure sintering

Liu, Y., Zhan, L., He, Y., Zhang, J., Hu, J., Cheng, L., Wu, Q., & Liu, S. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.186 · Cited by 94

Quantitative characterization of defects in stereolithographic additive manufactured ceramic using X-ray computed tomography

Zhang, K., Meng, Q., Zhang, X., Qu, Z., & He, R. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.11.060 · Cited by 93

Influence of dispersant concentration toward enhancing printing precision and surface quality of vat photopolymerization 3D printed ceramics

Kim, I., Kim, S., Andreu, A., Kim, J.-H., & Yoon, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102659 · Cited by 90

3D-printed ceramic structures with in situ grown whiskers for effective oil/water separation

Chen, Z., Zhang, D., Peng, E., & Ding, J. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.150 · Cited by 90

Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing

Yu, Y., Zou, B., Wang, X., & Huang, C. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.05.099 · Cited by 89

Effect of the particle size on the performance of BaTiO3 piezoelectric ceramics produced by additive manufacturing

Chen, X., Sun, J., Guo, B., Wang, Y., Yu, S., Wang, W., & Bai, J. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.09.213 · Cited by 88

Preparation and properties of Si3N4 ceramics via digital light processing using Si3N4 powder coated with Al2O3-Y2O3 sintering additives

Li, M., Huang, H.-L., Wu, J., Wu, Y., Shi, Z.-A., Zhang, J., & Shi, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102713 · Cited by 88

Additive manufacturing of silicon nitride ceramics: A review of advances and perspectives

Dong, X., Wu, J., Yu, H., Zhou, Q., Wang, W., Zhang, X., Zhang, L., Li, L., & He, R. (2022) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14162 · Cited by 86

Oxygen-controlled bottom-up mask-projection stereolithography for ceramic 3D printing

Lian, Q., Yang, F., Xin, H. J., & Li, D. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.08.014 · Cited by 83

Accurate printing of a zirconia molar crown bridge using three-part auxiliary supports and ceramic mask projection stereolithography

Lian, Q., Wu, X., Li, D., He, X., Meng, J., Liu, X., & Jin, Z. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.06.111 · Cited by 82

Better ceramics through colloid chemistry

Moreno, R. (2019) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2019.10.014 · Cited by 81

Anisotropy management on microstructure and mechanical property in 3D printing of silica-based ceramic cores

Fan, J., Xu, X., Niu, S., Zhou, Y., Li, X., Guo, Y., & Luo, Y. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.03.059 · Cited by 81

A novel aqueous ceramic suspension for ceramic stereolithography

Zhou, W., Li, D., & Wang, H. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011011686 · Cited by 80

Stereolithographic 3D Printing of Ceramics: Challenges and Opportunities for Structural Integrity

Lube, T., Staudacher, M., Hofer, A., Schlacher, J., & Bermejo, R. (2022) · Advanced Engineering Materials · doi:10.1002/adem.202200520 · Cited by 80

Additive manufacturing of complex-shaped and high-performance aluminum nitride-based components for thermal management

Lin, L., Wu, H., Ni, P., Chen, Y., Huang, Z., Li, Y., Lin, K., Sheng, P., & Wu, S. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102671 · Cited by 75

Designing alumina-zirconia composites by DLP-based stereolithography: Microstructural tailoring and mechanical performances

Coppola, B., Lacondemine, T., Tardivat, C., Montanaro, L., & Palmero, P. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.204 · Cited by 73

DLP 3D printing porous β-tricalcium phosphate scaffold by the use of acrylate/ceramic composite slurry

Liu, S., Mo, L., Bi, G., Chen, S., Yan, D., Yang, J., Jia, Y., & Ren, L. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.04.114 · Cited by 73

Development of a high solid loading β-TCP suspension with a low refractive index contrast for DLP -based ceramic stereolithography

Huang, X., Dai, H., Hu, Y., Zhuang, P., Zhiliang, S., & Ma, Y. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.12.047 · Cited by 72

Effect of the preparation techniques of photopolymerizable ceramic slurry and printing parameters on the accuracy of 3D printed lattice structures

Kovačev, N., Li, S., & Essa, K. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.08.052 · Cited by 72

Improving cure performance of Si3N4 suspension with a high refractive index resin for stereolithography-based additive manufacturing

Zou, W., Yang, P., Lin, L., Li, Y., & Wu, S. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.124 · Cited by 72

The role of plasticizer in optimizing the rheological behavior of ceramic pastes intended for stereolithography-based additive manufacturing

Nie, J., Li, M., Liu, W., Li, W., & Xing, Z. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.08.013 · Cited by 71

Fabrication of zirconia all‐ceramic crown via DLP‐based stereolithography

Li, X., Zhong, H. X., Zhang, J., Duan, Y., Li, J., & Jiang, D. (2019) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13441 · Cited by 70

High-performance and high-precision Al2O3 architectures enabled by high-solid-loading, graphene-containing slurries for top-down DLP 3D printing

Gu, Q., Sun, L., Ji, X., Honglei, W. A. N. G., Yu, J., & Zhou, X. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.09.048 · Cited by 70

Influence of high-temperature oxidation of SiC powders on curing properties of SiC slurry for digital light processing

Zhang-Ao, S. H. I., Wu, J., Zhi-Qiang, F. A. N. G., & Shi, Y. (2022) · Journal of Advanced Ceramics · doi:10.26599/jac.2023.9220675 · Cited by 70

Microstructure refinement-homogenization and flexural strength improvement of Al2O3 ceramics fabricated by DLP-stereolithography integrated with chemical precipitation coating process

Nie, G., Li, Y., Sheng, P., Zuo, F., Wu, H., Liu, L., Deng, X., Bao, Y., & Wu, S. (2021) · Journal of Advanced Ceramics · doi:10.1007/s40145-021-0473-2 · Cited by 69

Fused silica ceramic core based on network-structured zircon design via 3D printing

Li, Q., Liang, J., Zhang, Y., Li, J., Zhou, Y., & Sun, X. (2021) · Scripta Materialia · doi:10.1016/j.scriptamat.2021.114342 · Cited by 69

3D printing of ceramic cellular structures for potential nuclear fusion application

Liu, Y., Chen, Z., Li, J., Gong, B., Wang, L., Lao, C., Wang, P., Liu, C., Feng, Y., & Wang, X. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101348 · Cited by 68

Roles of solid loading in stereolithography additive manufacturing of ZrO2 ceramic

Zhang, K., Meng, Q., Zhang, X., Qu, Z., Jing, S., & He, R. (2021) · International Journal of Refractory Metals and Hard Materials · doi:10.1016/j.ijrmhm.2021.105604 · Cited by 67

3D printing of ceramic composite with biomimetic toughening design

Sun, J., Yu, S., Wade, J., Wang, Y., Qu, H., Zhao, S., Zhang, R., Yang, J., Binner, J. G. P., & Bai, J. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103027 · Cited by 67

Properties of ceramic injection moulding formulations

Woodthorpe, J., Edirisinghe, M. J., & Evans, J. (1989) · Journal of Materials Science · doi:10.1007/bf01148795 · Cited by 66

Rational design of bioceramic scaffolds with tuning pore geometry by stereolithography: Microstructure evaluation and mechanical evolution

Lu, F., Wu, R., Shen, M., Xie, L., Liu, M., Li, Y., Xu, S., Wan, L., Yang, X., Gao, C., et al. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.10.002 · Cited by 65

Effects of debinding condition on microstructure and densification of alumina ceramics shaped with photopolymerization-based additive manufacturing technology

Zhang, L., Huang, J., Xiao, Z., He, Y., Liu, K., He, B., Xiang, B., Zhai, J. P., & Kong, L. B. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.288 · Cited by 65

Stereolithographically 3D Printed SiC Metastructure for Ultrabroadband and High Temperature Microwave Absorption

Zhou, N., Zhang, L., Wang, W., Zhang, X., Zhang, K., Chen, M., Huang, Y., He, R., & Fang, D. (2022) · Advanced Materials Technologies · doi:10.1002/admt.202201222 · Cited by 65

Defect-Free Ceramics 3d-Printed with the Addition of a Non-Reactive Diluent

Kim, J., Gal, C. W., Choi, Y., Park, H., Yoon, S.-Y., & Yun, H. (2022) · Additive manufacturing · doi:10.1016/j.addma.2023.103475 · Cited by 65

Controllable Ceramic Green‐Body Configuration for Complex Ceramic Architectures with Fine Features

Zhang, D., Peng, E., Borayek, R., & Ding, J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807082 · Cited by 64

Controlling the anisotropy behaviour of 3D printed ceramic cores: From intralayer particle distribution to interlayer pore evolution

Li, Q., Hou, W., Liang, J., Zhang, C., Li, J., Zhou, Y., & Sun, X. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103055 · Cited by 64

Influence of debinding parameter and nano-ZrO2 particles on the silica-based ceramic cores fabricated by stereolithography-based additive manufacturing

Yin, Y., Wang, J., Huang, Q., Xu, S., Shuai, S., Hu, T., Xuan, W., Yin, S., Chen, C., & Ren, Z. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.03.221 · Cited by 63

Preparation and characterization of ZrO2-Al2O3 bioceramics by stereolithography technology for dental restorations

Fen, C., Wu, Y., Wu, J., Zhu, H., Chen, S., Hua, S., He, Z., Liu, C., Xiao, J., & Shi, Y. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102055 · Cited by 63

Effect of dispersants on structural integrity of 3D printed ceramics

Kim, J., Choi, Y., Gal, C. W., Park, H., Yoon, S.-Y., & Yun, H. (2021) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13965 · Cited by 63

Improved mechanical properties of SiC fiber reinforced silica-based ceramic cores fabricated by stereolithography

Zheng, W., Wu, J., Chen, S., Yu, K.-B., Zhang, J., & Shi, Y. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.12.012 · Cited by 61

Mechanical and biological evaluation of lattice structured hydroxyapatite scaffolds produced via stereolithography additive manufacturing

Kang, J. H., Sakthiabirami, K., Jang, K.-J., Jang, J.-G., Oh, G.-J., Park, C., Fisher, J. G., & Park, S.-W. (2021) · Materials & Design · doi:10.1016/j.matdes.2021.110372 · Cited by 59

Additive manufacturing and characterization of complex Al 2 O 3 parts based on a novel stereolithography method

An, D., Li, H., Xie, Z., Zhu, T., Luo, X., Shen, Z. J., & Ma, J. (2017) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.12721 · Cited by 58

Stability, rheological behaviors, and curing properties of 3Y–ZrO2 and 3Y–ZrO2/GO ceramic suspensions in stereolithography applied for dental implants

Zhang, C., Jiang, Z., Zhao, L., Guo, W., & Gao, X. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.191 · Cited by 58

Fabrication and properties of BaTiO3 ceramics via digital light processing for piezoelectric energy harvesters

Liu, C., Du, Q., Zhang, C., Wu, J., Zhang, G., & Shi, Y. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102940 · Cited by 58

Urethane acrylate‐based photosensitive resin for three‐dimensional printing of stereolithographic elastomer

Deng, Y., Li, J., He, Z., Jiang, H., & Bao, J. (2020) · Journal of Applied Polymer Science · doi:10.1002/app.49294 · Cited by 56

The effect of particle size distribution on the microstructure and properties of Al2O3 ceramics formed by stereolithography

Qian, C., Hu, K., Wang, H., Nie, L., Feng, Q., Lu, Z., Li, P., & Lu, K. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.04.133 · Cited by 56

Microstructure and properties of 3D‐printed alumina ceramics with different heating rates in vacuum debinding

Li, H., Liu, Y., Liu, Y., Zeng, Q., Hu, K., Liang, J., & Lu, Z. (2020) · Rare Metals · doi:10.1007/s12598-020-01372-x · Cited by 55

Degradation of Polyolefin Blends Used for Ceramic Injection Molding

Wright, J. K., Evans, J., & Edirisinghe, M. J. (1989) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1989.tb05985.x · Cited by 54

A systematic study of vat-polymerization binders with potential use in the ceramic suspension 3D printing

Ozkan, B., Sameni, F., Karmel, S., Engstrøm, D. S., & Sabet, E. (2021) · Additive manufacturing · doi:10.1016/j.addma.2021.102225 · Cited by 54

Preparation of highly dispersive solid microspherical α-Al2O3 powder with a hydrophobic surface for stereolithography-based 3D printing technology

Xu, X., Zhou, S., Wu, J., Zhang, Q., Zhang, Y., & Zhu, G. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.09.167 · Cited by 53

Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing

Wang, L., Liu, X., Wang, G., Tang, W., Li, S., Duan, W., & Dou, R. (2019) · Materials Science and Engineering A · doi:10.1016/j.msea.2019.138537 · Cited by 53

Additive micro-manufacturing of crack-free PDCs by two-photon polymerization of a single, low-shrinkage preceramic resin

Konstantinou, G., Kakkava, E., Hagelüken, L., Sasikumar, P. V. W., Wang, J., Makowska, M. G., Blugan, G., Nianias, N., Marone, F., Swygenhoven, H. V., et al. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101343 · Cited by 52

The enhanced ZrO2 produced by DLP via a reliable plasticizer and its dental application

Han, Z., Liu, S., Qiu, K. L., Qiu, K. L., Zou, R., Wang, Y., Zhao, J., Liu, F., Wang, Y., & Li, L. (2023) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2023.105751 · Cited by 52

The cure performance of modified ZrO2 coated by paraffin via projection based stereolithography

Li, Y., Chen, Y., Minglang, W., Li, L., Wu, H., He, F., & Wu, S. (2018) · Ceramics International · doi:10.1016/j.ceramint.2018.10.003 · Cited by 51

Preparation and optimization of Si3N4 ceramic slurry for low-cost LCD mask stereolithography

Wu, X., Xu, C., & Zhang, Z. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.12.072 · Cited by 51

Study of alumina ceramic parts fabricated via DLP stereolithography using powders with different sizes and morphologies

Xu, X., Zhou, S., Wu, J., Liu, S., Ma, S., & Cheng, T. (2022) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14245 · Cited by 51

Relationship between the adhesion properties of UV-curable alumina suspensions and the functionalities and structures of UV-curable acrylate monomers for DLP-based ceramic stereolithography

Xu, X., Zhou, S., Wu, J., Liu, Y., Wang, Y., & Chen, Z. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.08.166 · Cited by 50

Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Paredes, C., Martínez-Vázquez, F. J., Elsayed, H., Colombo, P., Pajares, A., & Miranda, P. (2020) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2020.09.002 · Cited by 49

Effects of solid loading on stereolithographic additive manufactured ZrO2 ceramic: A quantitative defect study by X-ray computed tomography

Zhang, K., Meng, Q., Cai, N., Qu, Z., & He, R. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.05.149 · Cited by 49

Enhanced curing behavior, mechanical and thermal properties of 3D printed aluminum nitride ceramics using a powder coating strategy

Sheng, P., Nie, G., Li, Y., Wang, L., Chen, J., Deng, X., & Wu, S. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103732 · Cited by 49

Structure design influencing the mechanical performance of 3D printing porous ceramics

Mei, H., Tan, Y., Huang, W., Chang, P., Fan, Y., & Cheng, L. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.11.203 · Cited by 48

Near‐Zero Thermal Expansion Ba1−xSrxZn2Si2O7‐Based Microwave Dielectric Ceramics for 3D Printed Dielectric Resonator Antenna with Integrative Lens

Zou, Z., Lou, Y., Song, X., Jiang, H. T., Du, K., Yin, C., Lü, W., Wang, X., Wang, X., Fu, M., et al. (2021) · Advanced Materials Interfaces · doi:10.1002/admi.202100584 · Cited by 48

Optimization of UV-curable alumina suspension for digital light processing of ceramic membranes

Wang, D., Chen, T., Zeng, Y., Chen, X., Xing, W., Fan, Y., & Qiao, X. (2021) · Journal of Membrane Science · doi:10.1016/j.memsci.2021.120066 · Cited by 48

The influence of topology on DLP 3D printing, debinding and sintering of ceramic periodic architectures designed to replace bulky components

Santoliquido, O., Camerota, F., & Ortona, A. (2021) · Open Ceramics · doi:10.1016/j.oceram.2021.100059 · Cited by 47

Irregular pore size of degradable bioceramic Voronoi scaffolds prepared by stereolithography: Osteogenesis and computational fluid dynamics analysis

Li, J., Guo, D., Li, J., Wei, X., Sun, Z., Yang, B., Lu, T., Ouyang, P., Chang, S., Liu, W., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111414 · Cited by 47

Optimization of Vat-Polymerization binder formulation for 3D printing ceramic slurry using D-optimal mixture experimental design

Chen, H., Chen, B., Li, J., Yan, H., Zeng, Y., & Chen, J. (2023) · Composites Part B Engineering · doi:10.1016/j.compositesb.2023.110777 · Cited by 47

3D printing of dense structural ceramic microcomponents with low cost: Tailoring the sintering kinetics and the microstructure evolution

Liu, W., Wu, H., Tian, Z., Li, Y., Zhao, Z., Huang, M., Deng, X., Xie, Z., & Wu, S. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.16241 · Cited by 46

Polycrystalline alumina ceramic fabrication using digital stereolithographic light process

Hsiang, H., Lee, C.-Y., Chen, C.-C., Wang, J., Tang, D., & Dong, Z. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.08.293 · Cited by 46

Effect of build orientation on the manufacturing process and the properties of stereolithographic dental ceramics for crown frameworks

Dehurtevent, M., Robberecht, L., Thuault, A., Deveaux, É., Leriche, A., Petit, F., Denis, C., Hornez, J., & Béhin, P. (2020) · Journal of Prosthetic Dentistry · doi:10.1016/j.prosdent.2020.01.024 · Cited by 46

Relationship between mechanical properties of ceramic green body and structures of photo-cured acrylate polymer for ceramic 3D printing based on photo polymerization

Lee, H.-J., Park, H., Kim, E., Choi, H., Jin, J., Choi, J., Yang, S., & Jung, Y. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.09.247 · Cited by 46

SiC paste with high curing thickness for stereolithography

Wang, K., Liu, R., & Bao, C. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.06.183 · Cited by 46

Kinetic analysis of the polymer burnout in ceramic thermoplastic processing of the YSZ thin electrolyte structures using model free method

Salehi, M., Clemens, F. J., Graule, T. J., & Grobéty, B. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.02.025 · Cited by 45

Stereolithographic additive manufacturing diamond/SiC composites with high thermal conductivity for electronic 3D-packaging applications

Chen, R., Lian, Q., Li, D., He, X., Wang, S., & Zhuang, J. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.01.270 · Cited by 45

Effects of ZrSiO4 content on properties of SiO2-based ceramics prepared by digital light processing

Zhang, J., Yu, K.-B., Wu, J., Ye, C.-S., Zheng, W. H., Liu, H., Wen, S., Yan, C., & Shi, Y. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.11.128 · Cited by 43

Effect of Fe2O3 doping on color and mechanical properties of dental 3Y-TZP ceramics fabricated by stereolithography-based additive manufacturing

Wang, L., Lian, Y., Tang, W., & Dou, R. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.12.062 · Cited by 43

Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoinductivity based on digital light processing technology

Zhao, H., Xing, H., Lai, Q., Zhao, Y., Chen, Q., & Zou, B. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.111231 · Cited by 42

A diffusion-controlled kinetic model for binder burnout in a powder compact

Shi, Z., Guo, Z. X., & Song, J. H. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00036-8 · Cited by 42

A stereolithographic diamond-mixed resin slurry for complex SiC ceramic structures

Chen, R., Lian, Q., He, X., Wang, J., & Li, D. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.02.014 · Cited by 41

Mechanism of ceramic slurry light scattering affecting contour accuracy and method of projection plane correction

Ye, Y., Deqiao, X., Chen, J., Zhaoling, D., Lida, S., Zongjun, T., Yunfei, C., & Hou, F. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.01.085 · Cited by 41

Realization of complex-shaped and high-performance alumina ceramic cutting tools via Vat photopolymerization based 3D printing: A novel surface modification strategy through coupling agents aluminic acid ester and silane coupling agent

Wu, H., Liu, W., Lin, L., Chen, Y., Xu, Y., Wu, S., Sun, Z., An, D., Wei, S., & Xie, Z. (2022) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2022.10.064 · Cited by 41

High‐Quality Translucent Alumina Ceramic Through Digital Light Processing Stereolithography Method

Sun, Y., Li, M., Jiang, Y., Xing, B., Shen, M., Cao, C., Wang, C., & Zhao, Z. (2021) · Advanced Engineering Materials · doi:10.1002/adem.202001475 · Cited by 40

Development and analysis of a high refractive index liquid phase Si3N4 slurry for mask stereolithography

Wu, X., Xu, C., & Zhang, Z. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.09.087 · Cited by 40

Preparation of high-performance silica-based ceramic cores with B4C addition using selective laser sintering and SiO2–Al2O3 sol infiltration

Zheng, W. H., Wu, J., Chen, S., Yu, K.-B., Zhang, J., Liu, H., Wen, S., Yan, C., & Shi, Y. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.147 · Cited by 40

Fabrication of highly translucent yttria-stabilized zirconia ceramics using stereolithography-based additive manufacturing

Wang, L., Yu, H., Hao, Z., Tang, W., & Dou, R. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.02.081 · Cited by 40

Thermal debinding mass transfer mechanism and dynamics of copper green parts fabricated by an innovative 3D printing method

Yan, X., Wang, C., Xiong, W., Hou, T., Hao, L., & Tang, D. (2018) · RSC Advances · doi:10.1039/c7ra13149f · Cited by 39

A strategy for defects healing in 3D printed ceramic compact via cold isostatic pressing: Sintering kinetic window and microstructure evolution

An, D., Liu, W., Xie, Z., Li, H., Luo, X., Wu, H., Huang, M., Liang, J., Tian, Z., & He, R. (2018) · Journal of the American Ceramic Society · doi:10.1111/jace.16269 · Cited by 38

Fabrication of high-performance MgTiO3–CaTiO3 microwave ceramics through a stereolithography-based 3D printing

Lou, Y., Wang, F., Li, Z., Zou, Z., Fan, G., Wang, X., Lei, W., & Lü, W. (2020) · Ceramics International · doi:10.1016/j.ceramint.2020.03.282 · Cited by 38

Improved mechanical properties of SiB6 reinforced silica-based ceramic cores fabricated by 3D stereolithography printing

Zheng, W. H., Wu, J., Chen, S., Yu, K.-B., Zhang, J., Liu, H., Huo, Y.-F., & Shi, Y. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.03.248 · Cited by 38

Binder Removal from Ceramic‐Filled Thermoplastic Blends

Knapp, A. M., & Halloran, J. W. (2006) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2006.01179.x · Cited by 37

Preparation of high-performance ZrO2 bio-ceramics by stereolithography for dental restorations

Wang, H., Shen, F., Li, Z., Zhou, B., Zhao, P., Yang, J., Cheng, B., Yang, J., Li, B., & Wang, X. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.06.052 · Cited by 37

Alumina-based ceramic mold with integral core and shell for hollow turbine blades fabricated by laser powder bed fusion

Chen, S., Sun, D., Wang, C., Wen, S., Wu, J., Yan, C., Shi, Y., Chen, C., & Ren, Z. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103046 · Cited by 35

3D printed carbon-ceramic structures for enhancing photocatalytic properties

Mei, H., Huang, W., Liu, H., Pan, L., & Cheng, L. (2019) · Ceramics International · doi:10.1016/j.ceramint.2019.05.008 · Cited by 34

Sample selection for models to represent ceramic cores fabricated by stereolithography three-dimensional printing

An, X., Liang, J., Li, J. G., Chen, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.12.058 · Cited by 33

Effect of debinding and sintering profile on the optical properties of DLP-3D printed YAG transparent ceramic

Shen, Y., Sun, Y., Jin, B., Li, M., Xing, B., & Zhao, Z. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.03.323 · Cited by 32

A comprehensive evaluation of vat-photopolymerization resins and alumina slurries for ceramic stereolithography

Li, T., Chen, H., Zhang, Y., Gu, Y., Hu, C., Li, S., Liu, B., Duan, W., & Wang, G. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.242 · Cited by 32

Mechanical properties and wear behaviors analysis of fluorapatite glass-ceramics based on stereolithography 3D printing

Yang, B., Wang, S., Wang, G., & Yang, X. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104859 · Cited by 31

Improving the accuracy of stereolithography 3D printed Al2O3 microcomponents by adding photoabsorber: Fundamentals and experiments

Chen, J., Su, R., Zhai, X., Wang, Y., Gao, X., Zhang, X., Zhang, Y., Zhang, Y., Liu, S., & He, R. (2023) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2023.09.309 · Cited by 31

Stereolithography 3D printed monolithic catalyst for highly efficient oxidative desulfurization of fuels

Wu, Y., He, J. H., Huang, W., Chen, W., Zhou, S., She, X., Zhu, W., Huang, F., Li, H., & Xu, H. F. (2022) · Fuel · doi:10.1016/j.fuel.2022.126021 · Cited by 30

Influence of layer thickness on microstructure and dielectric properties of Mg2TiO4 microwave ceramics fabricated by vat photopolymerization

Liu, F., He, H., Cheng, L., Li, H., Bian, H., & Liu, S. (2023) · Additive manufacturing · doi:10.1016/j.addma.2023.103413 · Cited by 29

Theory and practice of rapid and safe thermal debinding in ceramic injection molding

Xie, H., Jiang, J., Yang, X., He, Q., Zhou, Z., Xu, X., & Zhang, L. (2019) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13349 · Cited by 28

Effect of polystyrene addition on properties of porous Si3N4 ceramics fabricated by digital light processing

Tian, C., Wu, J., Wu, Y., Liu, C., Lin, X., & Shi, Y. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.05.246 · Cited by 28

Comparative Analysis of Wollastonite‐Diopside Glass‐Ceramic Structures Fabricated via Stereo‐Lithography

Elsayed, H., Schmidt, J. E. M., Bernardo, E., & Colombo, P. (2019) · Advanced Engineering Materials · doi:10.1002/adem.201801160 · Cited by 27

Preparation of Si 3 N 4 ceramic based on digital light processing 3D printing and precursor infiltration and pyrolysis

Wang, X., Li, Y., Liu, B., Li, S., Duan, W., Wang, G., & Chen, F. (2022) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.14229 · Cited by 27

Preparation of porous SnO2-based ceramics with lattice structure by DLP

Qi, G., Zeng, Y., & Chen, J. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.01.350 · Cited by 26

Fabrication of silica-based ceramic cores with internal lattice structures by stereolithography

Hu, K., Wang, H., Lu, K., Feng, Q., Yang, D.-D., Cao, J., Zhang, B., Lu, Z., & Ran, X. (2022) · China Foundry · doi:10.1007/s41230-022-2048-4 · Cited by 26

Binder removal from ceramic stereolithography green bodies: A neutron imaging and thermal analysis study

McAleer, E. G., Alazzawi, M. K., Hwang, C., LaManna, J. M., Jacobson, D. L., Khaykovich, B., Haber, R. A., & Akdoğan, E. K. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19095 · Cited by 24

Reinforcement effect in printing precision and sintering performance for liquid crystal display stereolithography additive manufacturing of alumina ceramics

Huang, W., Wu, Y., Chen, W., Chen, H., He, J., Yan, J., Chen, C., Song, Y., Ji, H., & Xu, H. F. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.07.328 · Cited by 24

Kinetics of the oxidative degradation of ceramic injection-moulding vehicle

Wright, J. K., & Evans, J. (1991) · Journal of Materials Science · doi:10.1007/bf00549868 · Cited by 23

3D Printing of Robust 8YSZ Electrolytes with a Hyperfine Structure for Solid Oxide Fuel Cells

Yuan, J., Chen, Y., Sun, J., Wang, Y., Lin, M., Wang, M., Wang, H., & Bai, J. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03707 · Cited by 23

Phase evolution and properties of porous cordierite ceramics prepared by cordierite precursor pastes based on supportless stereolithography

Li, S., Bao, C., Dong, W., & Liu, R. (2022) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2022.166295 · Cited by 22

A digital light processing 3D printing approach for tuning the interfacial properties of pore forming agents for porous ceramics

Kim, I., Andreu, A., & Yoon, Y. (2023) · Materials & Design · doi:10.1016/j.matdes.2023.112247 · Cited by 21

Photopolymerization and reaction sintering enabled generative shaping and material-forming of complex ceramic structures with high performance

Su, F., Liu, Y., Zhang, C., Luo, Z., Cao, J., Liu, Z., Wang, P., Liu, C., & Chen, Z. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.102651 · Cited by 20

The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structures

Zhang, G., Zou, B., Wang, X., Yu, Y., Huang, C., Zhu, H., Yao, P., & Liu, H. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.07.097 · Cited by 20

Microwave sintering of dense and lattice 3Y-TZP samples shaped by digital light processing

Khalile, N., Meunier, C., Petit, C., Valdivieso, F., Coppola, B., & Palmero, P. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.10.194 · Cited by 19

Enhanced mechanical and sintering properties of MgO-TiO2 ceramic composite via digital light processing

Hu, B., Zou, W., Wu, W., Tang, J., Chen, R., Zhou, H., Du, C., & Shan, B. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.12.016 · Cited by 18

Microwave-assisted debinding of Al2O3 parts printed by stereolithography

Pérez, M. C., Jean, F., Thuault, A., Hautcoeur, D., & Leriche, A. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.02.206 · Cited by 18

Debinding of additively manufactured parts from spinel powders with particle sizes below 200 nm

Zubrzycka, P., Radecka, M., Graule, T. J., & Stuer, M. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.11.335 · Cited by 17

Fabrication and properties of alumina ceramics shaped by digital light processing as an additive manufacturing technology

Zhang, L., Huang, J., He, Y., Liu, K., Xiang, B., Zhai, J. P., Kong, L. B., Zhang, T., & Liu, Y. (2021) · International Journal of Applied Ceramic Technology · doi:10.1111/ijac.13895 · Cited by 16

3D-printed lattice structures with SiC whiskers to strengthen thermal metamaterials

Rao, Y., Yan, Y., Mei, H., Zhou, S., Tan, Y., Cheng, L., & Zhang, L. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.07.170 · Cited by 16

Fabrication of three-dimensional ceramic photonic crystals and their electromagnetic properties

Mori, H., Kirihara, S., & Miyamoto, Y. (2006) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2005.09.079 · Cited by 15

Fabrication and properties of diatomite ceramics with hierarchical pores based on direct stereolithography

Li, S., Bao, C., Ma, H., Dong, W., Song, S., Wang, Q., Liu, R., & Wu, P. (2021) · Ceramics International · doi:10.1016/j.ceramint.2021.11.169 · Cited by 15

Uniting printability and self-supportability of cordierite precursor pastes for fabricating cordierite ceramics with custom structures via supportless stereolithography

Li, S., Bao, C., Liu, R., Dong, W., Ma, H., & Jia, Y. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.08.030 · Cited by 15

Effect of debinding on alumina specimens and ultra-thin veneer fits using solvent-based stereolithography

Lee, W.-F., Huang, C., Renn, T., Wang, Z.-Y., Lin, Y.-T., Wang, J.-C., & Peng, P. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.09.127 · Cited by 14

Influence of the ratio of sintering aids on the properties of porous Si3N4 ceramics fabricated by digital light processing

Wu, Y., Tian, C., Wu, J., Huang, H.-L., Lin, X., Lin, X., Cheng, L., & Shi, Y. (2023) · Ceramics International · doi:10.1016/j.ceramint.2023.07.276 · Cited by 13

3D printing of ceramic matrix composites: Strengthening and toughening strategies

Zhang, F., Zhou, S., You, H., Zhang, G., Yang, J., & Shi, Y.-S. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112335 · Cited by 59

Machine Learning in 3D and 4D Printing of Polymer Composites: A Review

Malashin, I. P., Masich, I. S., Тынченко, В. С., Gantimurov, A., Nelyub, V., Бородулин, А. С., Martysyuk, D., & Galinovsky, A. L. (2024) · Polymers · doi:10.3390/polym16223125 · Cited by 60

Enhancing 3D printed ceramic components: The function of dispersants, adhesion promoters, and surface-active agents in Photopolymerization-based additive manufacturing

Trembecka‐Wójciga, K., & Ortyl, J. (2024) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2024.103251 · Cited by 54

A review on additive manufacturing of piezoelectric ceramics: From feedstock development to properties of sintered parts

Bhandari, S., Vajpayee, G., da Silva, L. L., Hinterstein, M., Franchin, G., & Colombo, P. (2024) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2024.100877 · Cited by 51

Fused Deposition Modeling of Polymer Composites: Development, Properties and Applications

Zotti, A., Paduano, T., Napolitano, F., Zuppolini, S., Zarrelli, M., & Borriello, A. (2025) · Polymers · doi:10.3390/polym17081054 · Cited by 49

Thermal Debinding of Ceramic-Filled Photopolymers

Pfaffinger, M., Mitteramskogler, G., Gmeiner, R., & Stampfl, J. (2015) · Materials science forum · doi:10.4028/www.scientific.net/msf.825-826.75 · Cited by 46

Optimization of thermal debinding using drying theory

(1999) · Metal Powder Report · doi:10.1016/s0026-0657(99)93585-3

Ceramic stereolithography debinding: an analysis of resin formulation, degradation, and thermal decomposition kinetics

McAleer, E. G. (2024) · Rutgers University Community Repository (Rutgers University) · doi:10.7282/t3-p1rg-8p22

Binder removal from ceramic stereolithography green bodies: A neutron imaging and thermal analysis study

McAleer, E. G., Alazzawi, M. K., Hwang, C., LaManna, J. M., Jacobson, D. L., Khaykovich, B., Haber, R. A., & Akdoğan, E. K. (2023) · Journal of the American Ceramic Society · doi:10.1111/jace.19095 · Cited by 24

Ceramic suspensions suitable for stereolithography

Hinczewski, C., Corbel, S., & Chartier, T. (1998) · Journal of the European Ceramic Society · doi:10.1016/s0955-2219(97)00186-6 · Cited by 356