Taguchi method based optimisation of drilling parameters in drilling of AISI 316 steel with PVD monolayer and multilayer coated HSS drills
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper focuses on the optimisation of drilling parameters using the Taguchi technique to obtain minimum surface roughness (Ra) and thrust force (Ff). A number of drilling experiments were conducted using the L16 orthogonal array on a CNC vertical machining centre. The experiments were performed on AISI 316 stainless steel blocks using uncoated and coated M35 HSS twist drills under dry cutting conditions. Analysis of variance (ANOVA) was employed to determine the most significant control factors affecting the surface roughness and thrust force. The cutting tool, cutting speed and feed rate were selected as control factors. After the sixteen experimental trials, it was found that the cutting tool was the most significant factor on the surface roughness and that the feed rate was the most significant factor on the thrust force. The results of the confirmation experiments showed that the Taguchi method was notably successful in the optimisation of drilling parameters for better surface roughness and thrust force.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Kurt, M., Bagci, E., & Kaynak, Y. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-007-1368-2 · Cited by 198 · cited 1×
“[17] employed Taguchi methods in the optimisation of cutting parameters for surface finish, and holediameter accuracy in a dry drilling process.”
Method
Cited by
Prasanna, J., Karunamoorthy, L., Venkat Raman, M., Prashanth, S., & Raj Chordia, D. (2014) · Measurement · doi:10.1016/j.measurement.2013.11.020 · Cited by 150
Neseli, S. (2014) · Advances in Mechanical Engineering · doi:10.1155/2014/925382 · Cited by 30
Vinoth Kumar, S., Rekha, R., Gokula Rajan, M., Adhinathan, C., Jessinth Blesso, E., & Karthik, B. (2022) · Key Engineering Materials · doi:10.4028/p-19hm0h
“From the investigations, it was observed that the cutting tool was mainly the significant parameter affecting surface finish under dry cutting conditions [14].”
Background
Metadata
- Authors
- Kıvak, T., Samtaş, G., & Çiçek, A.
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2012-07
- Volume
- 45
- Issue
- 6
- Pages
- 1547-1557
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W2040239843
- Cited by
- 116
- References
- 1
- FWCI
- 14.70
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.