The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Highly sensitive and wearable capacitive pressure sensors based on PVDF/BaTiO3 composite fibers on PDMS microcylindrical structures
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Furthermore, Yang et al. [63] fabricated PVDF-BaTiO 3 composites for flexible capacitive sensors, offering fast response, high sensitivity (5 kPa -1 ), low detection limit (0.11 Pa), and high durability (over 10,000 compression cycles).These sensors were used for breath monitoring and body movement tracking, making them suitable for wearable technology and electronic skin systems.”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [63]
In the citing paper
“The sensor exhibited high sensitivity (5 kPa -1 ), fast response times (25 ms), and an ultralow detection limit (0.11 Pa).”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [63]
In the citing paper
“Yang et al. [63] developed a flexible capacitive pressure sensor using BaTiO 3 -doped polyvinylidene fluoride fibers and polydimethylsiloxane microcylinders as the dielectric layer.”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [63]
In the citing paper
“Furthermore, it exhibited exceptional durability, withstanding 10,000 compressions and 5000 bends.”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [63]
In the citing paper
“These features made it well-suited for wearable applications, including pulse monitoring and acoustic detection (Figure 14) [55,59,63,[212][213][214][215].”
From Design Strategies and Emerging Applications of Perovskite-Based Sensors (2025) · cites this paper as [63]
Citations
Cites
Highly sensitive flexible pressure sensors with microstructured rubber dielectric layers
Mannsfeld, S. C. B., Tee, B. C.-K., Stoltenberg, R. M., Chen, C. V. H.-H., Barman, S., Muir, B. V. O., Sokolov, A. N., Reese, C., & Bao, Z. (2010) · Nature Materials · doi:10.1038/nmat2834 · Cited by 3,291
Multifunctional Skin‐Inspired Flexible Sensor Systems for Wearable Electronics
Xu, K., Lu, Y., & Takei, K. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800628 · Cited by 602
Transcatheter Self‐Powered Ultrasensitive Endocardial Pressure Sensor
Liu, Z., Ma, Y., Ouyang, H., Shi, B., Li, N., Jiang, D., Xie, F., Qu, D., Zou, Y., Huang, Y., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201807560 · Cited by 308
Flagged first, then by citations
Research works printed but not linked: 50
- Hwang, 2021, Fabrication of hierarchically porous structured PDMS composites and their application as a flexible capacitive pressure sensor, Compos. B. Eng., 211, 10.1016/j.compositesb.2021.108607 · DOI
- Meng, 2019, Flexible weaving constructed self-powered pressure sensor enabling continuous diagnosis of cardiovascular disease and measurement of cuffless blood pressure, Adv. Funct. Mater., 29, 1806388, 10.1002/adfm.201806388 · DOI
- Sun, 2020, Bioinspired, self-Powered, and highly sensitive electronic skin for sensing static and dynamic pressures, ACS Appl, Mater. Interfaces, 12, 37239, 10.1021/acsami.0c10788 · DOI
- Qiao, 2018, Multilayer graphene epidermal electronic skin, ACS Nano, 12, 8839, 10.1021/acsnano.8b02162 · DOI
- Hosseini, 2020, Glycine–chitosan-based flexible biodegradable piezoelectric pressure sensor, ACS Appl. Mater. Interfaces, 12, 9008, 10.1021/acsami.9b21052 · DOI
- Sekine, 2020, Microporous induced fully printed pressure sensor for wearable soft robotics machine interfaces, Adv. Intell. Syst., 2, 2000179, 10.1002/aisy.202000179 · DOI
- Son, 2018, An integrated self-healable electronic skin system fabricated via dynamic reconstruction of a nanostructured conducting network, Nat. Nanotechnol., 13, 1057, 10.1038/s41565-018-0244-6 · DOI
- Yang, 2022, Arrayed porous polydimethylsiloxane/barium titanate microstructures for high-sensitivity flexible capacitive pressure sensors, Ceram. Int., 48, 13144, 10.1016/j.ceramint.2022.01.191 · DOI
- Ding, 2018, Flexible and compressible PEDOT:PSS@melamine conductive sponge prepared via one-step dip coating as piezoresistive pressure sensor for human motion detection, ACS Appl. Mater. Interfaces, 10, 16077, 10.1021/acsami.8b00457 · DOI
- Shi, 2019, Screen-printed soft capacitive sensors for spatial mapping of both positive and negative pressures, Adv. Funct. Mater., 29, 1809116, 10.1002/adfm.201809116 · DOI
- Han, 2019, High-performance pressure sensors based on 3D microstructure fabricated by a facile transfer technology, Adv. Mater. Technol., 4, 1800640, 10.1002/admt.201800640 · DOI
- Liu, 2018, Piezoresistive pressure sensor based on synergistical innerconnect polyvinyl alcohol nanowires/wrinkled graphene film, Small, 14, 1704149, 10.1002/smll.201704149 · DOI
- Liu, 2017, Large-area all-textile pressure sensors for monitoring human motion and physiological signals, Adv. Mater., 29, 1703700, 10.1002/adma.201703700 · DOI
- Li, 2020, Hydrophobic and stable MXene–polymer pressure sensors for wearable electronics, ACS Appl. Mater. Interfaces, 12, 15362, 10.1021/acsami.0c00255 · DOI
- Yao, 2022, Improved shock tube method for dynamic calibration of the sensitivity characteristic of piezoresistive pressure sensors, Measurement, 196, 10.1016/j.measurement.2022.111271 · DOI
- Lim, 2021, Transparent and stretchable capacitive pressure sensor using selective plasmonic heating-based patterning of silver nanowires, Appl. Surf. Sci., 561, 10.1016/j.apsusc.2021.149989 · DOI
- Kulkarni, 2017, Transparent flexible multifunctional nanostructured architectures for non-optical readout, proximity, and pressure sensing, ACS Appl. Mater. Interfaces, 9, 15015, 10.1021/acsami.6b16840 · DOI
- Jung, 2020, A highly sensitive and flexible capacitive pressure sensor based on a porous three-dimensional PDMS/microsphere composite, Polymers, 12, 1412, 10.3390/polym12061412 · DOI
- Wen, 2018, Ultra-highly sensitive, low hysteretic and flexible pressure sensor based on porous MWCNTs/Ecoflex elastomer composites, J. Mater. Sci. Mater. Electron., 29, 20978, 10.1007/s10854-018-0242-3 · DOI
- Wu, 2022, A flexible tactile sensor that uses polyimide/graphene oxide nanofiber as dielectric membrane for vertical and lateral force detection, Nanotechnology, 33, 10.1088/1361-6528/ac73a4 · DOI
- Yang, 2020, A flexible and wide pressure range triboelectric sensor array for real-time pressure detection and distribution mapping, J. Mater. Chem. A, 8, 23827, 10.1039/D0TA08223F · DOI
- Wang, 2016, Lin Wang, Self-powered high-resolution and pressure-sensitive triboelectric sensor matrix for real-time tactile mapping, Adv. Mater., 28, 2896, 10.1002/adma.201503407 · DOI
- Lee, 2016, Fully packaged self-powered triboelectric pressure sensor using hemispheres-array, Adv. Energy Mater., 6, 1502566, 10.1002/aenm.201502566 · DOI
- Xiong, 2020, A flexible, ultra-highly sensitive and stable capacitive pressure sensor with convex microarrays for motion and health monitoring, Nano energy, 70, 10.1016/j.nanoen.2019.104436 · DOI
- Park, 2015, Stretchable array of highly sensitive pressure sensors consisting of polyaniline nanofibers and Au-coated polydimethylsiloxane micropillars, ACS Nano, 9, 9974, 10.1021/acsnano.5b03510 · DOI
- E. Thouti, A. Nagaraju, A. Chandran, P.V.B.S.S. Prakash, P. Shivanarayanamurthy, B. Lal, P. Kumar, P. Kothari, D. Panwar, Tunable flexible capacitive pressure sensors using arrangement of polydimethylsiloxane micro-pyramids for bio-signal monitoring, Sens. Actuator A Phys., 314 (2020) 112251. · DOI
- Zhang, 2017, Highly sensitive capacitive pressure sensor based on a micropyramid array for health and motion monitoring, Adv. Electron. Mater., 9, 10128
- Luo, 2021, High-resolution and high-sensitivity flexible capacitive pressure sensors enhanced by a transferable electrode array and a micropillar-PVDF film, ACS Appl. Mater. Interfaces, 13, 7635, 10.1021/acsami.0c23042 · DOI
- Shuai, 2017, Highly sensitive flexible pressure sensor based on silver nanowires-embedded polydimethylsiloxane electrode with microarray structur, ACS Appl. Mater. Interfaces, 9, 26314, 10.1021/acsami.7b05753 · DOI
- Pruvost, 2019, Polymeric foams for flexible and highly sensitive low-pressure capacitive sensors, npj Flex, Electron., 3, 1
- Mahata, 2020, Biomimetic-inspired micro-nano hierarchical structures for capacitive pressure sensor applications, Measurement, 151, 10.1016/j.measurement.2019.107095 · DOI
- Pang, 2018, Epidermis microstructure inspired graphene pressure sensor with random distributed spinosum for high sensitivity and large linearity, ACS Nano, 12, 2346, 10.1021/acsnano.7b07613 · DOI
- Thouti, 2022, Flexible capacitive pressure sensors using microdome like structured polydimethylsiloxane dielectric layers, Sens. Actuator A Phys., 335, 10.1016/j.sna.2022.113393 · DOI
- Palaniappan, 2021, Flexible M-tooth hybrid micro-structure based capacitive pressure sensor with high sensitivity and wide sensing range, IEEE Sens. J., 1–8
- Shao, 2020, Highly sensitive conformal pressure sensing coatings based on thermally expandable microspheres, Adv. Mater. Technol., 5, 2000032, 10.1002/admt.202000032 · DOI
- Yang, 2019, Microstructured porous pyramid-based ultrahigh sensitive pressure sensor insensitive to strain and temperature, ACS Appl. Mater. Interfaces, 11, 19472, 10.1021/acsami.9b03261 · DOI
- Ko, 2021, Carbonized cotton fabric-based flexible capacitive pressure sensor using a porous dielectric layer with tilted air gaps, Sensors, 21, 3895, 10.3390/s21113895 · DOI
- Wu, 2021, Fabrication of capacitive pressure sensor with extraordinary sensitivity and wide sensing range using PAM/BIS/GO nanocomposite hydrogel and conductive fabric, Compos. Part A Appl. Sci. Manuf., 145, 10.1016/j.compositesa.2021.106373 · DOI
- Guo, 2019, Anodized aluminum oxide-assisted low-cost flexible capacitive pressure sensors based on double-sided nanopillars by a facile fabrication method, ACS Appl. Mater. Interfaces, 11, 48594, 10.1021/acsami.9b17966 · DOI
- Yaqoob, 2017, A novel tri-layer flexible piezoelectric nanogenerator based on surface- modified graphene and PVDF-BaTiO3 nanocomposites, Appl. Surf. Sci., 405, 420, 10.1016/j.apsusc.2017.01.314 · DOI
- Hu, 2019, Improved piezoelectric sensing performance of P(VDF–TrFE) nanofibers by utilizing BTO nanoparticles and penetrated electrodes, ACS Appl. Mater. Interfaces, 11, 7379, 10.1021/acsami.8b19824 · DOI
- Bao, 2016, Skin-inspired organic electronic materials and devices, MRS Bull., 41, 897, 10.1557/mrs.2016.247 · DOI
- Cheng, 2018, Flexible pressure sensor with high sensitivity and low hysteresis based on a hierarchically microstructured electrode, IEEE Electron Device Lett., 39, 288, 10.1109/LED.2017.2784538 · DOI
- Lovett, 2005, The vexatious vital: neither clinical measurements by nurses nor an electronic monitor provides accurate measurements of respiratory rate in triage, Ann. Emerg. Med., 45, 68, 10.1016/j.annemergmed.2004.06.016 · DOI
- Zeng, 2019, Tunable, ultrasensitive, and flexible pressure sensors based on wrinkled microstructures for electronic skins, ACS Appl. Mater. Interfaces, 11, 21218, 10.1021/acsami.9b02518 · DOI
- Yang, 2019, Flexible, tunable, and ultrasensitive capacitive pressure sensor with microconformal graphene electrodes, ACS Appl. Mater. Interfaces, 11, 14997, 10.1021/acsami.9b02049 · DOI
- Ma, 2018, A highly sensitive and flexible capacitive pressure sensor based on a micro-arrayed polydimethylsiloxane dielectric layer, J. Mater. Chem. C, 6, 13232, 10.1039/C8TC04297G · DOI
- Chhetry, 2020, Enhanced sensitivity of capacitive pressure and strain sensor based on CaCu3Ti4O12 wrapped hybrid sponge for wearable applications, Adv. Funct. Mater., 30, 1910020, 10.1002/adfm.201910020 · DOI
- Zhuo, 2017, High sensitivity flexible capacitive pressure sensor using polydimethylsiloxane elastomer dielectric layer micro-structured by three-dimensional printed mold, IEEE J. Electron Devices Soc., 5, 219, 10.1109/JEDS.2017.2683558 · DOI
- Yoon, 2017, A novel means of fabricating microporous structures for the dielectric layers of capacitive pressure sensor, Microelectron. Eng., 179, 60, 10.1016/j.mee.2017.04.028 · DOI
Cited by
Sorted by citations
Design Strategies and Emerging Applications of Perovskite-Based Sensors
Li, Y., Ding, Y., Sun, J., Tan, S., Li, Y., Wang, X., Cai, J., Bai, J., Lv, X., Guo, W., et al. (2025) · SmartMat · doi:10.1002/smm2.70022 · Cited by 41
Cutting-Edge Perovskite-Based Flexible Pressure Sensors Made Possible by Piezoelectric Innovation
Naz, A., Meng, Y., Luo, J., Khan, I. A., Abbas, R., Yu, S., & Wei, J. (2024) · Materials · doi:10.3390/ma17174196 · Cited by 14
Metadata
- Authors
- Yang, C.-R., Lin, M.-F., Huang, C.-K., Huang, W.-C., Tseng, S.-F., & Chiang, H.-H.
- Affiliations
- National Taiwan Normal University (TW)
- National Taipei University of Technology (TW)
- Corresponding author
- Tseng, Shih-Feng
- Chiang, Hsin-Han
- Venue
- Measurement
- Publisher
- Elsevier BV
- Published
- 2022-10
- Volume
- 202
- Pages
- 111817
- ISSN
- 0263-2241 (ISSN-L)
- OpenAlex
- W4293379691
- Cited by
- 77
- References
- 3
- Citations by year
- 2026: 16 · 2025: 27 · 2024: 18 · 2023: 14 · 2022: 2
- FWCI
- 4.44
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Locations
- Measurement (publishedVersion)
- Funders
- Ministry of Science and Technology, Taiwan (110-2221-E-027-076)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
- Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Dielectric materials and actuators
- Physical Sciences › Engineering › Biomedical Engineering › Non-Invasive Vital Sign Monitoring
- Keywords
- capacitive pressure sensor, wearable sensors, dielectric layer, flexible electronics, acoustic detection
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review