The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
A polyacrylonitrile (PAN)-based double-layer multifunctional gel polymer electrolyte for lithium-sulfur batteries
Abstract
Abstract Owing to high theoretical capacity, lithium-sulfur batteries (LSBs) are receiving extensive researches. However, cyclic instability and safety issues hugely confine the commercial applications of traditional liquid LSBs. In this work, for the sake of fully leveraging the high ionic conductivity of polyacrylonitrile while avoiding Li anode “passivation effect” caused by CN group, we prepare double-layer gel polymer electrolytes for quasi-solid-state LSBs. The transition layer composed of polyacrylonitrile, polyethylene oxide and Li1.3Al0.3Ti1.7(PO4)3 (LATP) is located on Li anode side to reduce “passivation effect” triggered by pure polyacrylonitrile. Meanwhile, the high ionic conductivity layer composed of polyacrylonitrile and LATP in contact with cathode can utilize the high intrinsic ionic conductivity of polyacrylonitrile to enhance the rate performance. Furthermore, LATP with higher ionic conductivity embedded in the membrane serves as Li+ transport channels to further increase ionic conductivity. Prominently, the designed double-layer electrolytes exhibit a high Li+ transference number of 0.55 and superior mechanical property. Moreover, stable coulombic efficiency of 99.6–100.0% over 100 cycles and good capacity retention of 79.0% after 100 cycles at 0.1C can be achieved. Our newly designed double-layer electrolytes with multiple functions exhibit potential applications in safer LSBs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Cited by
Advances in Lithium–Sulfur Batteries: From Academic Research to Commercial Viability
Chen, Y., Wang, T., Tian, H., Su, D., Zhang, Q., & Wang, G. (2021) · Advanced Materials · doi:10.1002/adma.202003666 · Cited by 870
Ionic Conduction in Polymer‐Based Solid Electrolytes
Li, Z., Fu, J., Zhou, X., Gui, S., Wei, L., Yang, H., Li, H., & Guo, X. (2023) · Advanced Science · doi:10.1002/advs.202201718 · Cited by 678
In situ polymerization of solid-state polymer electrolytes for lithium metal batteries: a review
Zou, S., Yang, Y., Wang, J., Zhou, X., Wan, X., Zhu, M., & Liu, J. (2024) · Energy & Environmental Science · doi:10.1039/d4ee00822g · Cited by 305
Metadata
- Authors
- Wang, X., Hao, X., Xia, Y., Liang, Y., Xia, X., & Tu, J.
- Venue
- Journal of Membrane Science
- Publisher
- Elsevier BV
- Published
- 2019-07
- Volume
- 582
- Pages
- 37-47
- ISSN
- 0376-7388 (ISSN-L)
- OpenAlex
- W2925328692
- Cited by
- 162
- References
- 1
- FWCI
- 6.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A polyacrylonitrile (PAN)-based double-layer multifunctional gel polymer electrolyte for lithium-sulfur batteries. https://app.cochat.ai/papers/10.1016/j.memsci.2019.03.048
- The paper
- Wang, X., Hao, X., Xia, Y., Liang, Y., Xia, X., & Tu, J. (2019). A polyacrylonitrile (PAN)-based double-layer multifunctional gel polymer electrolyte for lithium-sulfur batteries. Journal of Membrane Science. https://doi.org/10.1016/j.memsci.2019.03.048
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.