Novel thin-film reverse osmosis membrane with MXene Ti3C2T embedded in polyamide to enhance the water flux, anti-fouling and chlorine resistance for water desalination
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
The development of high performance reverse osmosis (RO) membranes still remains a big challenge due to not only the trade-off between water flux and salt rejection, but also their easy fouling and chlorine attacking. In this paper, a novel thin-film nanocomposite RO membrane with two-dimensional MXene Ti3C2Tx embedded in the polyamide (PA) layer was fabricated by in-situ interfacial polymerization with m-phenylenediamine aqueous solution and trimesoyl chloride. Due to the outstanding diffusion regulating effect of Ti3C2Tx in accordance with the Fick's first law, the water permeability was elevated to a maximum value of 2.53 L m−2 h−1 bar−1 at a high NaCl salt rejection of 98.5%. Simultaneously, the enhanced anti-fouling, and chlorine resistance of the as-obtained PA-Ti3C2Tx membrane were also obtained, outperforming the pristine PA and other related RO membranes in literature. Especially after a chlorine-resistance test at 10000 ppm h, a high salt rejection of 97.1% for the PA-Ti3C2Tx membrane was still retained. Based on the microstructural observation and mechanism analysis, such an improvement in chlorine resistance was mainly ascribed to the interaction between surface functional groups of Ti3C2Tx nanosheets with active chlorine, which effectively protected the PA matrix from being chlorine attacked. This work illustrates successfully a very new use of Ti3C2Tx to improve the comprehensive performance for water desalination membranes for practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
MXene Nanofibers as Highly Active Catalysts for Hydrogen Evolution Reaction
Yuan, W., Cheng, L., An, Y., Wu, H., Yao, N., Fan, X., & Guo, X. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01348 · Cited by 285
Cited by
Liu, C., Wang, W., Yang, B., Xiao, K., & Zhao, H. (2021) · Water Research · doi:10.1016/j.watres.2021.116976 · Cited by 231
Lim, Y. J., Goh, K., & Wang, R. (2022) · Chemical Society Reviews · doi:10.1039/d1cs01061a · Cited by 190
Metadata
- Authors
- Wang, X., Li, Q., Zhang, J., Huang, H., Wu, S., & Yang, Y.
- Venue
- Journal of Membrane Science
- Publisher
- Elsevier BV
- Published
- 2020-05
- Volume
- 603
- Pages
- 118036
- ISSN
- 0376-7388 (ISSN-L)
- OpenAlex
- W3011412980
- Cited by
- 168
- References
- 1
- FWCI
- 6.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.