The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
The evolution of mineral processing in extraction of rare earth elements using liquid-liquid extraction: A review
Abstract
The attempt to extract rare earth elements (REE) has started over a century ago using activated carbon and continues until today with various methods involved to improve the extraction yield. Instead of solid-liquid extraction, the use of liquid-liquid extraction (LLE) has been more common due to the convenient arrangement of the process. Solvent extraction is the main process applied in LLE of REE and along the way, various kind of solvent extractants have evolved. The use of traditional extractants (e.g., benzene, heptane, and kerosene) in LLE has been diverted to the application of conventional extractants (e.g., tributyl phosphate (TBP), di-(2-ethylhexyl)phosphoric acid (D2EHPA), and Cyanex 923 to increase the extraction efficiency. Apparently, the disadvantages of conventional extractants have led to the application of ionic liquid (IL) in the evolution of extraction of REE. IL was found as a potential extractant for REE due to its ability to extract certain metals, green solvent, and has the flexibility to create different combination of cation and anion. However, conventional extractants appear to be more effective in the extraction of REE compared to IL. Therefore, the complex solvents are then compromised and synergised to create better extractant with both advantages between conventional extractants and IL. Most synergistic extractants (SE) appear to be more effective in the extraction of REE and able to reduce the use of chemicals. These advantages make SE more desirable in solvent extraction. This paper highlights the evolution of REE extraction using various kind of extractants with advantages and disadvantages discoveries based on various literatures.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A critical review on solvent extraction of rare earths from aqueous solutions
Xie, F., Zhang, T. A., Dreisinger, D., & Doyle, F. (2014) · Minerals Engineering · doi:10.1016/j.mineng.2013.10.021 · Cited by 1,444
Synergistic effect of Cyanex 272 and Cyanex 302 on separation of cobalt and nickel by D2EHPA
Darvishi, D., Haghshenas, D. F., Alamdari, E. K., Sadrnezhaad, S. K., & Halali, M. (2005) · Hydrometallurgy · doi:10.1016/j.hydromet.2005.02.002 · Cited by 159
Cited by
Recent advances in selective separation technologies of rare earth elements: a review
Chen, Z., Li, Z., Chen, J., Kallem, P., Banat, F., & Qiu, H. (2022) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.107104 · Cited by 320
The recovery and separation of lithium by using solvent extraction methods
Kanagasundaram, T., Murphy, O., Haji, M. N., & Wilson, J. J. (2024) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2024.215727 · Cited by 263
Metadata
- Authors
- Hidayah, N. N., & Abidin, S. Z.
- Venue
- Minerals Engineering
- Publisher
- Elsevier BV
- Published
- 2018-06
- Volume
- 121
- Pages
- 146-157
- ISSN
- 0892-6875 (ISSN-L)
- OpenAlex
- W2793663750
- Cited by
- 178
- References
- 2
- FWCI
- 9.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.