The DOI matches its Crossref record; 102 of the 102 references it cites were found in a registry or an index.
Novel composite material for selective copper(II) detection and removal from aqueous media
Abstract
The mesoporous composite material (MeCM) was fabricated using functional organic ligand of 2-methyl-8-quinolinol immobilization onto the porous silica by direct conjugation and employed as an effective material for the detection and removal of copper (Cu(II)) ion from aqueous media. The material characterization was evaluated in detail to understand the material morphology for complexation during the Cu(II) ion capturing. The variation of pH solution, reaction time, detection limit, initial Cu(II) concentration and competing ion parameters were measured systematically. The MeCM was sensitively evolved the color upon addition of Cu(II) ion even in the low concentration level. The detection limit was 0.33 μg/L. The solution pH was highly influenced both in the detection and adsorption operation. However, the neutral pH 7.0 was effective for efficient detection and removal of Cu(II) ion. The application of MeCM was significantly enhanced the removal capacity as well as selectivity. The Langmuir isotherm model was applied to validate the adsorption isotherms as the MeCM exhibited the homogeneous ordered frameworks. The adsorption capacity was 197.15 mg/g as expected due to the high surface area of MeCM even after ligand immobilization onto the porous silica. The competing ion was not affected significantly during the Cu(II) ion detection and removal because of the high affinity Cu(II) ion to MeCM at this optimum experimental protocol. Moreover, the Cu(II) ion was desorbed from the MeCM with using 0.20 M HCl and able to reuse in several cycles without deterioration in its original performances. Therefore, the designing method with experimental condition makes the MeCM to adopt for various environmental applications dealing with monitoring and separation processes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
6 retracted
Efficient detection and adsorption of cadmium(II) ions using innovative nano-composite materials
Awual, M. R., Khraisheh, M., Alharthi, N. H., Luqman, M., Islam, A., Rezaul Karim, M., Rahman, M. M., & Khaleque, M. A. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.02.116 · Cited by 461
Self-citationRetractedAwual, M. R. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.06.040 · Cited by 439
Self-citationRetractedAwual, M. R., Alharthi, N. H., Okamoto, Y., Karim, M. R., Halim, M. E., Hasan, M. M., Rahman, M. M., Islam, M. M., Khaleque, M. A., & Sheikh, M. C. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.03.075 · Cited by 352
Self-citationRetractedAwual, M. R., Alharthi, N. H., Hasan, M. M., Karim, M. R., Islam, A., Znad, H., Hossain, M. A., Halim, M. E., Rahman, M. M., & Khaleque, M. A. (2017) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.05.026 · Cited by 334
Self-citationRetractedAwual, M. R., Asiri, A. M., Rahman, M. M., & Alharthi, N. H. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.01.125 · Cited by 204
Self-citationRetractedVisual nickel(II) ions treatment in petroleum samples using a mesoporous composite adsorbent
Shahat, A., Hassan, H. M. A., El-Shahat, M. F., El Shahawy, O., & Awual, M. R. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2017.10.105 · Cited by 187
Self-citationRetractedLiu, Q.-S., Zheng, T., Wang, P., Jiang, J.-P., & Li, N. (2010) · Chemical Engineering Journal · doi:10.1016/j.cej.2009.11.013 · Cited by 911
A review on heavy metal ions adsorption from water by graphene oxide and its composites
Peng, W., Li, H., Liu, Y., & Song, S. (2017) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2017.01.064 · Cited by 821
A novel facial composite adsorbent for enhanced copper(II) detection and removal from wastewater
Awual, M. R. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.12.094 · Cited by 768
Self-citationHamadi, N. (2001) · Chemical Engineering Journal · doi:10.1016/s1385-8947(01)00194-2 · Cited by 620
Cited by
Recent advances on the removal of dyes from wastewater using various adsorbents: a critical review
Dutta, S., Gupta, B., Srivastava, S. K., & Gupta, A. K. (2021) · Materials Advances · doi:10.1039/d1ma00354b · Cited by 1,296
Awual, M. R. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.325 · Cited by 473
Self-citationRetractedCarbon-based electrocatalysts for sustainable energy applications
Wang, J., Kong, H., Zhang, J., Hao, Y., Shao, Z., & Ciucci, F. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100717 · Cited by 439
Enhanced toxic dye removal from wastewater using biodegradable polymeric natural adsorbent
Kubra, K. T., Salman, M. S., & Hasan, M. N. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.115468 · Cited by 439
Self-citationKarimi-Maleh, H., Shafieizadeh, M., Taher, M. A., Opoku, F., Kiarii, E. M., Govender, P. P., Ranjbari, S., Rezapour, M., & Orooji, Y. (2020) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2019.112040 · Cited by 400
Metadata
- Authors
- Awual, M. R., Hasan, M. M., Rahman, M. M., & Asiri, A. M.
- Venue
- Journal of Molecular Liquids
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 283
- Pages
- 772-780
- ISSN
- 0167-7322 (ISSN-L)
- OpenAlex
- W2923631248
- Cited by
- 335
- References
- 102
- FWCI
- 15.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel composite material for selective copper(II) detection and removal from aqueous media. https://app.cochat.ai/papers/10.1016/j.molliq.2019.03.141
- The paper
- Awual, M. R., Hasan, M. M., Rahman, M. M., & Asiri, A. M. (2019). Novel composite material for selective copper(II) detection and removal from aqueous media. Journal of Molecular Liquids. https://doi.org/10.1016/j.molliq.2019.03.141
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.