The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures
Abstract
The microstructure-mechanical property relationships of a non-equiatomic FeMnCoCr high entropy alloy (HEA), which shows a single face-centered cubic (fcc) structure in the undeformed state, have been systematically investigated at room and cryogenic temperatures. Both strength and ductility increase significantly when reducing the probing temperature from 293 K to 77 K. During tensile deformation at 293 K, dislocation slip and mechanical twinning prevail. At 173 K deformation-driven athermal transformation from the fcc phase to the hexagonal close-packed (hcp) martensite is the dominant mechanism while mechanical twinning occurs in grains with high Schmid factors. At 77 K athermal martensitic transformation continues to prevail in addition to dislocation slip and twinning. The reduction in the mean free path for dislocation slip through the fine martensite bundles and deformation twins leads to the further increased strength. The joint activation of transformation and twinning under cryogenic conditions is attributed to the decreased stacking fault energy and the enhanced flow stress of the fcc matrix with decreasing temperature. These mechanisms lead to an elevated strain hardening capacity and an enhanced strength-ductility combination. The temperature-dependent synergy effects of martensite formation, twinning and dislocation plasticity originate from the metastability alloy design concept. This is realized by relaxing the equiatomic HEA constraints towards reduced Ni and increased Mn contents, enabling a non-equiatomic material with low stacking fault energy. These insights are important for designing strong and ductile Ni-saving alloys for cryogenic applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Cited by
Multicomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
Shearing brittle intermetallics enhances cryogenic strength and ductility of steels
Wang, F., Song, M., Elkot, M. N., Yao, N., Sun, B., Song, M., Wang, Z., & Raabe, D. (2024) · Science · doi:10.1126/science.ado2919 · Cited by 253
Self-citation
Metadata
- Authors
- He, Z. F., Jia, N., Ma, D., Yan, H. L., Li, Z. M., & Raabe, D.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 759
- Pages
- 437-447
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W2945676487
- Cited by
- 210
- References
- 1
- FWCI
- 9.63
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures. https://app.cochat.ai/papers/10.1016/j.msea.2019.05.057
- The paper
- He, Z. F., Jia, N., Ma, D., Yan, H. L., Li, Z. M., & Raabe, D. (2019). Joint contribution of transformation and twinning to the high strength-ductility combination of a FeMnCoCr high entropy alloy at cryogenic temperatures. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2019.05.057
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.