The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler
Abstract
Abstract Adding Ni as filler material is one of the effective methods to restrain the cracks in laser-welded joints of NiTi/stainless steel (SS), while the formation of Ni3Ti at the NiTi/Ni interface result in uneven distribution of the microstructure of the joint, which limits tensile strength of the joint. In this study, post-weld heat treatment (PWHT) at 650 °C and 850 °C were applied on a defect-free NiTi/Ni/SS joint to improve its mechanical properties. As the PWHT temperature increases, more Ni3Ti was observed at the weld metal. This precipitation strengthened the weld metal, resulting in the average hardness of the weld metal increased from 375 HV0.2 to 493 HV0.2. Owing to the homogenization of microstructure of joints after PWHT, the tensile strength of the joint improved. The highest joint average strength reached 643 MPa at 850 °C PWHT, which is about 2.12 times higher than that of the as-welded joint.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Physical metallurgy of Ti–Ni-based shape memory alloys
Otsuka, K., & Ren, X. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2004.10.001 · Cited by 4,610
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Yuhua, C., Yuqing, M., Lü, W., & He, P. (2017) · Optics & Laser Technology · doi:10.1016/j.optlastec.2016.12.028 · Cited by 250
Influence of grain size distribution on the Hall–Petch relationship of welded structural steel
Lehto, P., Remes, H., Saukkonen, T., Hänninen, H., & Romanoff, J. (2014) · Materials Science and Engineering: A · doi:10.1016/j.msea.2013.10.094 · Cited by 240
Laser welding of TiNi shape memory alloy and stainless steel using Ni interlayer
Li, H. M., Sun, D., Cai, X., Dong, P., & Wang, W. Q. (2012) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2012.02.031 · Cited by 121
Comparative study of AISI 304L to AISI 316L stainless steels joints by TIG and Nd:YAG laser welding
Soltani, H. M., & Tayebi, M. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.06.302 · Cited by 106
Mirshekari, G. R., Saatchi, A., Kermanpur, A., & Sadrnezhaad, S. K. (2013) · Optics & Laser Technology · doi:10.1016/j.optlastec.2013.05.014 · Cited by 105
Li, H., Sun, D., Gu, X., Dong, P., & Lv, Z. (2013) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.03.014 · Cited by 88
Laser welding of TiNi shape memory alloy and stainless steel using Co filler metal
Li, H., Sun, D., Cai, X., Dong, P., & Gu, X. (2012) · Optics & Laser Technology · doi:10.1016/j.optlastec.2012.06.010 · Cited by 81
Friction welding of TiNi alloy to stainless steel using Ni interlayer
Fukumoto, S., Inoue, T., Mizuno, S., Okita, K., Tomita, T., & Yamamoto, A. (2010) · Science and Technology of Welding & Joining · doi:10.1179/136217109x12577814486692 · Cited by 73
Cited by
Ao, S. S., Cheng, M. P., Zhang, W., Oliveira, J. P., Manladan, S. M., Zeng, Z., & Luo, Z. (2022) · Ultrasonics · doi:10.1016/j.ultras.2022.106684 · Cited by 35
Metadata
- Authors
- Chen, Y., Sun, S., Zhang, T., Zhou, X., & Li, S.
- Venue
- Materials Science and Engineering: A
- Publisher
- Elsevier BV
- Published
- 2020-01
- Volume
- 771
- Pages
- 138545
- ISSN
- 0921-5093 (ISSN-L)
- OpenAlex
- W2979553159
- Cited by
- 275
- References
- 14
- FWCI
- 1.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler. https://app.cochat.ai/papers/10.1016/j.msea.2019.138545
- The paper
- Chen, Y., Sun, S., Zhang, T., Zhou, X., & Li, S. (2020). Effects of post-weld heat treatment on the microstructure and mechanical properties of laser-welded NiTi/304SS joint with Ni filler. Materials Science and Engineering: A. https://doi.org/10.1016/j.msea.2019.138545
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.