The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Friction stir additive manufacturing – An innovative tool to enhance mechanical and microstructural properties
Abstract
Abstract Friction stir additive manufacturing (FSAM) method is one of the growing techniques of additive manufacturing that utilizes the concept of solid state friction stir processing to develop multilayer components through layer by layer joining. The present work aims to highlight the working principle and the past research work carried out by the various authors that utilize FSAM as a fabrication process. Based on the available experimental data, the summary of additive based friction stir processes, type of machine for fabrication, materials, process parameters taken for the study is also discussed in detail. Mechanical properties such as grain refinement, microhardness variation, and tensile strength are also summarized, in comparison with their base materials. In addition, the current scenario and future scope of the FSAM process are also discussed in detail in terms of its utilization in various sectors of engineering along with estimated future trends.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
Aerospace applications of laser additive manufacturing
Liu, R., Wang, Z., Sparks, T., Liou, F., & Newkirk, J. (2017) · Laser Additive Manufacturing · doi:10.1016/b978-0-08-100433-3.00013-0 · Cited by 426
Cited by
Recent progress and perspectives in additive manufacturing of magnesium alloys
Zeng, Z., Salehi, M., Kopp, A., Xu, S., Esmaily, M., & Birbilis, N. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2022.03.001 · Cited by 264
Metadata
- Authors
- Kumar Srivastava, A., Kumar, N., & Rai Dixit, A.
- Venue
- Materials Science and Engineering: B
- Publisher
- Elsevier BV
- Published
- 2021-01
- Volume
- 263
- Pages
- 114832
- ISSN
- 0921-5107 (ISSN-L)
- OpenAlex
- W3092231266
- Cited by
- 223
- References
- 5
- FWCI
- 12.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.