3D printing of bulk metallic glasses
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Abstract Bulk metallic glasses (BMGs) being metallic materials without long-range order have attracted a considerable amount of interest from academia and industry in the past three decades due to their unique and outstanding properties. However, the manufacturing of glassy components with large dimension and complex geometries has remained a considerable challenge. The main obstructions in this regard arise from the oftentimes limited glass-forming ability (GFA) of most metallic systems, which requires extremely fast quenching of the corresponding melts and, consequently, limits the obtainable dimensions. In addition, BMGs generally have a poor machinability due to their intrinsic high hardness and extreme brittleness. The emerging 3D printing technology (also called additive manufacturing), as an advanced bottom-up manufacturing process, seems to be a viable route to circumvent these deficiencies inherent to conventional processing routes. Additive manufacturing theoretically allows the fabrication of large-sized BMGs and components with complex geometries, greatly extending the range of applications of BMGs as both structural and functional materials. The 3D printing technology has given fresh impetus to the field of BMGs and represents an approach, which is intensely explored in the BMG’s scientific community at the moment. In this review, we present a comprehensive overview of the state-of-the-art research on various aspects related to 3D printing of BMGs. It covers various 3D printing techniques for manufacturing BMGs, the microstructures (e.g. structural heterogeneities and fused-related defects) found in 3D-printed BMGs, the crystallization behavior in additively manufactured glasses and the associated alloy selection criterion, the observed mechanical properties and deformation mechanisms, and finally the functional properties and potential applications of 3D-printed BMGs and BMG matrix composites, in terms of catalysis, wear, corrosion, and biocompatibility. This article also identifies a number of key questions to be answered in the future in this important research direction in order to successfully bridge the gap from fundamental research to large-scale application of additively manufactured bulk metallic glasses.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)
Uzan, N. E., Shneck, R., Yeheskel, O., & Frage, N. (2017) · Materials Science and Engineering: A · doi:10.1016/j.msea.2017.08.027 · Cited by 302
Metadata
- Authors
- Zhang, C., Ouyang, D., Pauly, S., & Liu, L.
- Venue
- Materials Science and Engineering: R: Reports
- Publisher
- Elsevier BV
- Published
- 2021-07
- Volume
- 145
- Pages
- 100625
- ISSN
- 0927-796X (ISSN-L)
- OpenAlex
- W3167530865
- Cited by
- 191
- References
- 2
- FWCI
- 13.20
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.