The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Progress in the development and application of CaO-based adsorbents for CO2 capture—a review
Abstract
Abstract Carbon dioxide (CO2) capture using CaO-based adsorbents has recently attracted intense attention from both academic and industrial sectors in the last decade due to the high theoretical capacity of CO2 capture, low cost, and potential use in large scale. However, the successful development of CaO-based adsorbents is limited by significant sintering of adsorbent particles over a number of cycles of CaO carbonation/calcination. In this work, a systematic understanding of fundamental aspects of the cyclic carbonation/calcination of CaO-based materials is reviewed. A number of efforts have been discussed to improve the sintering-resistant properties of CaO-based adsorbents, such as decreasing the particle size and increasing the surface area, dispersing CaO on inert support, as well as surface modification. In particular, severe process conditions such as carrying out material calcination under pure CO2 atmosphere were considered for the development of CaO-based materials. In addition, important process parameters for CaO-based carbon capture such as CO2 partial pressure, carbonation temperature, carbonation time and the presence of contaminants have been reviewed, as well as the reactivation of spent sorbents. Synthetic CaO-based adsorbents have better performance than natural adsorbents due to the improved porosity and the presence of nanosized particles. The promising capacity and stability of CO2 capture can be obtained when the synthetic adsorbents have high surface area and mesopores and/or CaO particles are stabilized using inert materials such as Ca12Al14O33. With an increase of steam concentration in the process, the decay of CO2 capture capacity was mitigated due to the formation of a stable pore structure. The calcium looping technology has been demonstrated in pilot scale combining with catalytic reforming or gasification process. However, the reduction of sorbent costs and the optimization of process conditions (e.g. carbonation and calcination time) still need to be tested in larger scale to reduce the overall costs and enhance the overall energy efficiency. Material attrition is a key challenge in large-scale demonstration of calcium looping process. Novel technology could be developed to avoid the transportation of solid sorbents. For example, by integrating with CO2 conversion to methane, the capture of CO2 and the regeneration of bifunctional sorbents can be carried out at the same temperature in a fixed bed reactor. This can be fulfilled by introducing hydrogen to the stage of sorbent regeneration. However, much more fundamental understanding is required in this area, such as the exploration of synergies between sorbent regeneration and catalytic conversion of CO2.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cuéllar-Franca, R. M., & Azapagic, A. (2015) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2014.12.001 · Cited by 1,571
Lackner, K. S. (2003) · Science · doi:10.1126/science.1079033 · Cited by 1,290
Calcium looping sorbents for CO2 capture
Erans, M., Manovic, V., & Anthony, E. J. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.07.074 · Cited by 369
On the climate change mitigation potential of CO 2 conversion to fuels
Abanades, J. C., Rubin, E. S., Mazzotti, M., & Herzog, H. J. (2017) · Energy & Environmental Science · doi:10.1039/c7ee02819a · Cited by 302
An apparent kinetic model for the carbonation of calcium oxide by carbon dioxide
Lee, D. K. (2004) · Chemical Engineering Journal · doi:10.1016/j.cej.2003.12.003 · Cited by 214
Cited by
Understanding the Effect of Water on CO2 Adsorption
Kolle, J. M., Fayaz, M., & Sayari, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00762 · Cited by 523
Dunstan, M. T., Donat, F., Bork, A. H., Grey, C. P., & Müller, C. R. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00100 · Cited by 481
Dual-Function Materials for CO2 Capture and Conversion: A Review
Omodolor, I. S., Otor, H. O., Andonegui, J. A., Allen, B. J., & Alba-Rubio, A. C. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c02218 · Cited by 355
CO2 capture materials: a review of current trends and future challenges
Dziejarski, B., Serafin, J., Andersson, K., & Krzyżyńska, R. (2023) · Materials Today Sustainability · doi:10.1016/j.mtsust.2023.100483 · Cited by 302
Shafawi, A. N., Mohamed, A. R., Lahijani, P., & Mohammadi, M. (2021) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2021.106869 · Cited by 187
Metadata
- Authors
- Sun, H., Wu, C., Shen, B., Zhang, X., Zhang, Y., & Huang, J.
- Venue
- Materials Today Sustainability
- Publisher
- Elsevier BV
- Published
- 2018-12
- Volume
- 1-2
- Pages
- 1-27
- ISSN
- 2589-2347 (ISSN-L)
- OpenAlex
- W2889770876
- Cited by
- 194
- References
- 5
- FWCI
- 7.67
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Progress in the development and application of CaO-based adsorbents for CO2 capture—a review. https://app.cochat.ai/papers/10.1016/j.mtsust.2018.08.001
- The paper
- Sun, H., Wu, C., Shen, B., Zhang, X., Zhang, Y., & Huang, J. (2018). Progress in the development and application of CaO-based adsorbents for CO2 capture—a review. Materials Today Sustainability. https://doi.org/10.1016/j.mtsust.2018.08.001
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.