The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries
Abstract
Abstract LiNi0.8Co0.15Al0.05O2 (LNCA) is a highly promising cathode material for lithium-ion batteries, but the low-rate capability and poor cycling stability of LNCA limit the expansibility of its commercial applications. Herein, Li4SiO4 with a small amount of Al is introduced to modify LNCA by combined wet-chemical and solid-state methods and improve its rate and cycle performance. X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), High Resolution Transmission Electron Microscope (HRTEM), and Energy Disperse Spectroscopy (EDS) results confirm that a Li4SiO4 coating layer (2–5 nm) is firmly wrapped on the LNCA surface. The modified LNCA shows surprising rate performance and excellent cycle retention. Specifically, the LNCA material coated with 3 mol% Li4SiO4 displays a discharge capacity of 156.5 mAh g−1 at 10 C and exhibits a capacity retention of 88% after 100 cycles at 1 C rate(2.7–4.3 V). The excellent electrochemical performance of the LNCA@Li4SiO4 is due to the incorporation of the Li4SiO4 layer. This layer enhances the lithium-ion diffusion between electrode and electrolyte and suppresses the side reaction produced by direct contact between the active material and electrolyte during repeated charge–discharge cycles. All these findings indicate the high potential of this material for application in advanced lithium-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thackeray, M. M., Wolverton, C., & Isaacs, E. D. (2012) · Energy & Environmental Science · doi:10.1039/c2ee21892e · Cited by 2,515
Noh, H.-J., Youn, S., Yoon, C. S., & Sun, Y.-K. (2013) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.01.063 · Cited by 2,302
Nickel‐Rich Layered Lithium Transition‐Metal Oxide for High‐Energy Lithium‐Ion Batteries
Liu, W., Oh, P., Liu, X., Lee, M., Cho, W., Chae, S., Kim, Y., & Cho, J. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201409262 · Cited by 1,960
Hu, E., Yu, X., Lin, R., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0207-z · Cited by 1,015
Yan, P., Zheng, J., Liu, J., Wang, B., Cheng, X., Zhang, Y., Sun, X., Wang, C., & Zhang, J.-G. (2018) · Nature Energy · doi:10.1038/s41560-018-0191-3 · Cited by 826
Self-citationZhang, Q., Chen, H., Luo, L., Zhao, B., Luo, H., Han, X., Wang, J., Wang, C., Yang, Y., Zhu, T., et al. (2018) · Energy & Environmental Science · doi:10.1039/c8ee00239h · Cited by 337
Effect of synthesis method on the electrochemical performance of LiNi1/3Mn1/3Co1/3O2
Li, D.-C., Muta, T., Zhang, L., Yoshio, M., & Noguchi, H. (2004) · Journal of Power Sources · doi:10.1016/j.jpowsour.2004.01.016 · Cited by 260
Wang, Y., Jiang, J., & Dahn, J. R. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2007.07.033 · Cited by 231
Huang, Y. H., Jin, F., Chen, F., & Chen, L. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.01.003 · Cited by 164
Defect Chemistry in Layered LiMO2 (M = Co, Ni, Mn, and Li1/3Mn2/3) by First-Principles Calculations
Koyama, Y., Arai, H., Tanaka, I., Uchimoto, Y., & Ogumi, Z. (2012) · Chemistry of Materials · doi:10.1021/cm3018314 · Cited by 151
Cited by
Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries
Wu, F., Maier, J., & Yu, Y. (2020) · Chemical Society Reviews · doi:10.1039/c7cs00863e · Cited by 2,229
Yang, H., Wu, H., Ge, M., Li, L., Yuan, Y., Yao, Q., Chen, J., Xia, L., Zheng, J., Chen, Z., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808825 · Cited by 630
Self-citationQu, X., Huang, H., Wan, T., Hu, L., Yu, Z., Liu, Y., Dou, A., Zhou, Y., Su, M., Peng, X., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2021.106665 · Cited by 310
Metadata
- Authors
- Zheng, J.-C., Yang, Z., He, Z.-J., Tong, H., Yu, W.-J., & Zhang, J.-F.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2018-11
- Volume
- 53
- Pages
- 613-621
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2890398324
- Cited by
- 271
- References
- 16
- FWCI
- 15.24
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries. https://app.cochat.ai/papers/10.1016/j.nanoen.2018.09.014
- The paper
- Zheng, J.-C., Yang, Z., He, Z.-J., Tong, H., Yu, W.-J., & Zhang, J.-F. (2018). In situ formed LiNi0.8Co0.15Al0.05O2@Li4SiO4 composite cathode material with high rate capability and long cycling stability for lithium-ion batteries. Nano Energy. https://doi.org/10.1016/j.nanoen.2018.09.014
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.