The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
An eco-friendly triboelectric hybrid nanogenerators based on graphene oxide incorporated polycaprolactone fibers and cellulose paper
Abstract
In this research, an eco-friendly triboelectric nanogenerator (TENG) with high output performance based on poly(caprolactone) (PCL)/graphene oxide (GO) and cellulose paper was developed. PCL/GO fibrous layers consisting of various concentrations of GO nanosheets (0, 0.5, 1, 2, 4 and 8 wt%) were fabricated using a cost-effective and simple electrospinning approach. Moreover, the role of GO concentration as well as the topography, thickness, and size of friction layers on the triboelectric performance was investigated. We realized that PCL/4 wt% GO-cellulose paper produced an open circuit voltage, current density and maximum power density up to 120 V, 2.5 mA/m2 and 72.5 mW/m2, respectively. Results demonstrated that this open circuit voltage was 33% greater than that of flat PCL/4 wt% GO layer, confirming the role of the fibrous structure to promote charge density accumulation. Moreover, a 98% increase in the open circuit voltage was calculated for the TENG containing PCL-4 wt% GO with the dimension of 4 × 4 cm2. The output of triboelectric nanogenerator, driven by human hand tapping, was enough to light up at least 21 blue-light-emitting diodes (LEDs) continuously. This higher performance was attributed to the formation of nanopores and strengthened negative charges on PCL from the fibrous structure and oxygen functional groups of GO, respectively. We believed that the suggested triboelectric nanogenerator with high performance, low-cost and easy fabrication process, as well as biocompatibility, has the potential to be applied for eco-friendly power sources to resolve the electronic waste issue and for self-powered biomedical devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Progress in triboelectric nanogenerators as a new energy technology and self-powered sensors
Wang, Z. L., Chen, J., & Lin, L. (2015) · Energy & Environmental Science · doi:10.1039/c5ee01532d · Cited by 2,174
Biodegradable triboelectric nanogenerator as a life-time designed implantable power source
Zheng, Q., Zou, Y., Zhang, Y., Liu, Z., Shi, B., Wang, X., Jin, Y., Ouyang, H., Li, Z., & Wang, Z. L. (2016) · Science Advances · doi:10.1126/sciadv.1501478 · Cited by 617
Cited by
Wearable triboelectric nanogenerators for biomechanical energy harvesting
Zou, Y., Raveendran, V., & Chen, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105303 · Cited by 351
Song, Y., Shi, Z., Hu, G.-H., Xiong, C., Isogai, A., & Yang, Q. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta08642h · Cited by 318
Guo, Y., Wei, X., Gao, S., Yue, W., Li, Y., & Shen, G. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104288 · Cited by 279
Metadata
- Authors
- Parandeh, S., Kharaziha, M., & Karimzadeh, F.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2019-05
- Volume
- 59
- Pages
- 412-421
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2916871013
- Cited by
- 216
- References
- 2
- FWCI
- 7.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An eco-friendly triboelectric hybrid nanogenerators based on graphene oxide incorporated polycaprolactone fibers and cellulose paper. https://app.cochat.ai/papers/10.1016/j.nanoen.2019.02.058
- The paper
- Parandeh, S., Kharaziha, M., & Karimzadeh, F. (2019). An eco-friendly triboelectric hybrid nanogenerators based on graphene oxide incorporated polycaprolactone fibers and cellulose paper. Nano Energy. https://doi.org/10.1016/j.nanoen.2019.02.058
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.