The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Enhancing the crystallinity and perfecting the orientation of formamidinium tin iodide for highly efficient Sn-based perovskite solar cells
Open accessAbstract
Low power conversion efficiency (PCE) and poor reproducibility are among the main challenges for tin-based perovskite solar cells (HPSCs). The facile formation of tin vacancies and oxidation of the divalent tin cation during the thin film fabrication process are among the causes of these problems, because the tin perovskite layer then becomes p-doped, resulting in significant trap-assisted recombination losses in devices. In this paper, we demonstrate that increasing the crystallinity of the tin perovskite film is an effective way to address the open issues with Sn-based perovskites. We succeed in improving the crystallinity of the 3D formamidinium tin iodide (FASnI3) grains, increasing their size, and perfecting their orientation in the out-of-plane direction by incorporating ethylammonium iodide (EAI) into a 2D/3D tin perovskite film (where 2D is PEA2FASn2I7, PEA = phenylethylammonium). This leads to a decrease of traps and background charge carrier density, and therefore to decreased charge recombination losses in EAx2D/3D based devices, as compared not only to devices based on FASnI3 but also to those based on 2D/3D mixtures. As a consequence, devices using a perovskite layer with composition EA0.082D/3D exhibit much higher PCE (8.4%) and better reproducibility compared to devices based on mixed 2D/3D perovskites (7.7%) and 3D perovskite (4.7%).
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells
Jeon, N. J., Noh, J. H., Kim, Y. C., Yang, W. S., Ryu, S., & Seok, S. I. (2014) · Nature Materials · doi:10.1038/nmat4014 · Cited by 6,723
Cited by
Jiang, X., Wang, F., Wei, Q., Li, H., Shang, Y., Zhou, W., Wang, C., Cheng, P., Chen, Q., Chen, L., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-15078-2 · Cited by 625
Lead-free tin-halide perovskite solar cells with 13% efficiency
Nishimura, K., Kamarudin, M. A., Hirotani, D., Hamada, K., Shen, Q., Iikubo, S., Minemoto, T., Yoshino, K., & Hayase, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.104858 · Cited by 502
Recent progress in tin-based perovskite solar cells
Cao, J., & Yan, F. (2021) · Energy & Environmental Science · doi:10.1039/d0ee04007j · Cited by 479
The Role of the Interfaces in Perovskite Solar Cells
Shao, S., & Loi, M. A. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.201901469 · Cited by 477
Self-citationGu, S., Lin, R., Han, Q., Gao, Y., Tan, H., & Zhu, J. (2020) · Advanced Materials · doi:10.1002/adma.201907392 · Cited by 329
Metadata
- Authors
- Shao, S., Dong, J., Duim, H., ten Brink, G. H., Blake, G. R., Portale, G., & Loi, M. A.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 60
- Pages
- 810-816
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2938751855
- Cited by
- 186
- References
- 1
- FWCI
- 9.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Enhancing the crystallinity and perfecting the orientation of formamidinium tin iodide for highly efficient Sn-based perovskite solar cells. https://app.cochat.ai/papers/10.1016/j.nanoen.2019.04.040
- The paper
- Shao, S., Dong, J., Duim, H., ten Brink, G. H., Blake, G. R., Portale, G., & Loi, M. A. (2019). Enhancing the crystallinity and perfecting the orientation of formamidinium tin iodide for highly efficient Sn-based perovskite solar cells. Nano Energy. https://doi.org/10.1016/j.nanoen.2019.04.040
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.