Photovoltaic-pyroelectric effect coupled broadband photodetector in self-powered ZnO/ZnTe core/shell nanorod arrays
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Abstract Broadband photodetection is widely used in commercial and military fields. However, most semiconductor-based detectors face the constraint of light absorption, needing external bias, comparatively lower responsivity and slower response time that limit their practical applications. Herein, a self-powered core/shell photodetector was fabricated by sputtering a uniform p-type ZnTe layer on n-type ZnO nanorod array. By integrating pyroelectric and photovoltaic effects, the photodetector realizes broadband detection from 325 nm ultraviolet to 1064 nm near infrared under zero bias. The maximum responsivity and detectivity reach 196.24 mA/W and 3.47 × 1012 cm Hz1/2/W for 325 nm laser illumination with power density 2.13 mW/cm2, respectively, which are improved 10-fold relating to the device responded to photovoltaic effect only. While the rise and fall time are drastically reduced from 1.222 ms to 62 μs and 1.563 ms to 109 μs, respectively. In addition, the effects of light wavelength, power density and bias voltage on photocurrent response induced by photovoltaic-pyroelectric effect are systematically characterized and discussed. Our work not only provides a easy yet efficient procedure to construct broadband photodetector, but also broadens the application prospects of core/shell nanorod array based on photovoltaic-pyroelectric effect.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photodetectors based on graphene, other two-dimensional materials and hybrid systems
Koppens, F. H. L., Mueller, T., Avouris, P., Ferrari, A. C., Vitiello, M. S., & Polini, M. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.215 · Cited by 3,828
Cited by
Goel, V., & Kumar, H. (2024) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2024.3408775 · Cited by 5
“The work reported in [5], [13], [33], [34], [37], [38], and [40] utilizes ITO/FTO-based transparent conducting oxides as a substrate to achieve a 100% illumination ratio while the ZnO has been utilized as the pyroelectric material.”
Background
Metadata
- Authors
- You, D., Xu, C., Zhang, W., Zhao, J., Qin, F., & Shi, Z.
- Venue
- Nano Energy
- Publisher
- Elsevier BV
- Published
- 2019-08
- Volume
- 62
- Pages
- 310-318
- ISSN
- 2211-2855 (ISSN-L)
- OpenAlex
- W2946146670
- Cited by
- 158
- References
- 1
- FWCI
- 6.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.