The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Laser-derived graphene: A three-dimensional printed graphene electrode and its emerging applications
Abstract
Abstract Printing of binder-free graphene electrodes directly on substrates has the potential to enable a large number of applications. Though conventional processing techniques such as ink-jet, screen-printing, and roll coating methods offer reliable and scalable fabrication, device performance has often been limited by re-stacking of the graphene sheets and by presence of passive binders and or additives. Laser-based, direct-write technologies have shown promise as a reliable, maskless, and template-free patterning method. Thus, laser-derived graphene (LDG) electrode is emerging as a promising three-dimensional graphene electrode that can be simultaneously derived from precursor carbons or polymers and patterned upon laser exposure. The LDG can be obtained through irradiation by a variety of laser sources including CO2 infrared laser and femtosecond laser pulses, depending on the nature of the starting carbon precursors. Controlling the microstructure, amount and types of doping, and post-deposition methods enable a variety of applications including energy storage, catalysis, sensing and biomedicine. In this review article, we discuss recent progress in using laser-based fabrication of printed 3D graphene electrodes and its wide spectrum of applications. The review also discusses the material aspects of 3D graphene electrodes and provides an outlook for future potential.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Two-dimensional gas of massless Dirac fermions in graphene
Novoselov, K. S., Geim, A. K., Morozov, S. V., Jiang, D., Katsnelson, M. I., Grigorieva, I. V., Dubonos, S. V., & Firsov, A. A. (2005) · Nature · doi:10.1038/nature04233 · Cited by 21,611
Superior Thermal Conductivity of Single-Layer Graphene
Balandin, A. A., Ghosh, S., Bao, W., Calizo, I., Teweldebrhan, D., Miao, F., & Lau, C. N. (2008) · Nano Letters · doi:10.1021/nl0731872 · Cited by 13,823
Berger, C., Song, Z., Li, T., Li, X., Ogbazghi, A. Y., Feng, R., Dai, Z., Marchenkov, A. N., Conrad, E. H., First, P. N., et al. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp040650f · Cited by 3,548
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Graphene-based semiconductor photocatalysts
Xiang, Q., Yu, J., & Jaroniec, M. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15172j · Cited by 2,730
Ming, F., Liang, H., Shi, H., Xu, X., Mei, G., & Wang, Z. (2016) · Journal of Materials Chemistry A · doi:10.1039/c6ta06496e · Cited by 332
High-performance graphene-based flexible heater for wearable applications
Lin, S.-Y., Zhang, T.-Y., Lu, Q., Wang, D.-Y., Yang, Y., Wu, X.-M., & Ren, T.-L. (2017) · RSC Advances · doi:10.1039/c7ra03181e · Cited by 117
Cited by
Zhang, F., Feng, Y., & Feng, W. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100580 · Cited by 566
Sodium-ion battery anodes: Status and future trends
Zhang, W., Zhang, F., Ming, F., & Alshareef, H. N. (2019) · EnergyChem · doi:10.1016/j.enchem.2019.100012 · Cited by 407
Self-citationReview of MXene electrochemical microsupercapacitors
Jiang, Q., Lei, Y., Liang, H., Xi, K., Xia, C., & Alshareef, H. N. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2020.01.018 · Cited by 397
Self-citationAge of Flexible Electronics: Emerging Trends in Soft Multifunctional Sensors
Lee, J., Cho, K., & Kim, J. (2024) · Advanced Materials · doi:10.1002/adma.202310505 · Cited by 355
Biomass‐Derived Carbon Materials: Controllable Preparation and Versatile Applications
Wang, Y., Zhang, M., Shen, X., Wang, H., Wang, H., Xia, K., Yin, Z., & Zhang, Y. (2021) · Small · doi:10.1002/smll.202008079 · Cited by 324
Metadata
- Authors
- Kurra, N., Jiang, Q., Nayak, P., & Alshareef, H. N.
- Venue
- Nano Today
- Publisher
- Elsevier BV
- Published
- 2019-02
- Volume
- 24
- Pages
- 81-102
- ISSN
- 1748-0132 (ISSN-L)
- OpenAlex
- W2908256964
- Cited by
- 198
- References
- 7
- FWCI
- 9.55
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Laser-derived graphene: A three-dimensional printed graphene electrode and its emerging applications. https://app.cochat.ai/papers/10.1016/j.nantod.2018.12.003
- The paper
- Kurra, N., Jiang, Q., Nayak, P., & Alshareef, H. N. (2019). Laser-derived graphene: A three-dimensional printed graphene electrode and its emerging applications. Nano Today. https://doi.org/10.1016/j.nantod.2018.12.003
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.