The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Laser polishing of additive manufactured Ti alloys
Open accessAbstract
Abstract Laser-based additive manufacturing has attracted much attention as a promising 3D printing method for metallic components in recent years. However, surface roughness of additive manufactured components has been considered as a challenge to achieve high performance. In this work, we demonstrate the capability of fiber laser in polishing rough surface of additive manufactured Ti-based alloys as Ti-6Al-4V and TC11. Both as-received surface and laser-polished surfaces as well as cross-section subsurfaces were analyzed carefully by White-Light Interference, Confocal Microscope, Focus Ion Beam, Scanning Electron Microscopy, Energy Dispersive Spectrometer, and X-ray Diffraction. Results revealed that as-received Ti-based alloys with surface roughness more than 5 µm could be reduce to less than 1 µm through laser polishing process. Moreover, microstructure, microhardness and wear resistance of laser-polished zone was investigated in order to examine the thermal effect of laser polishing processing on the substrate of additive manufactured Ti alloys. This proof-of-concept process has the potential to effectively improve the surface roughness of additive manufactured metallic alloy by local polishing method without damage to the substrate.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Phase transformations during cooling in α+β titanium alloys
Ahmed, T., & Rack, H. J. (1998) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00802-2 · Cited by 1,224
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Epitaxy and Microstructure Evolution in Metal Additive Manufacturing
Basak, A., & Das, S. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-031728 · Cited by 363
Wu, S., Lu, Y., Gan, Y. L., Huang, T., Zhao, C. Q., Lin, J., Guo, S., & Lin, J. (2016) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.02.183 · Cited by 292
Influence of Tool Materials on Machinability of Titanium- and Nickel-Based Alloys: A Review
Pervaiz, S., Rashid, A., Deiab, I., & Nicolescu, M. (2014) · Materials and Manufacturing Processes · doi:10.1080/10426914.2014.880460 · Cited by 276
Laser polishing of parts built up by selective laser sintering
Lamikiz, A., Sánchez, J. A., López de Lacalle, L. N., & Arana, J. L. (2007) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2007.01.013 · Cited by 264
Height control of laser metal-wire deposition based on iterative learning control and 3D scanning
Heralić, A., Christiansson, A.-K., & Lennartson, B. (2012) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2012.03.016 · Cited by 252
Gasser, A., Backes, G., Kelbassa, I., Weisheit, A., & Wissenbach, K. (2010) · Laser Technik Journal · doi:10.1002/latj.201090029 · Cited by 223
Performance of laser polishing in finishing of metallic surfaces
Bordatchev, E. V., Hafiz, A. M. K., & Tutunea-Fatan, O. R. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5761-3 · Cited by 181
Research process on property and application of metal porous materials
Qin, J., Chen, Q., Yang, C., & Huang, Y. (2015) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2015.09.148 · Cited by 176
Microstructure of additive layer manufactured Ti–6Al–4V after exceptional post heat treatments
Brandl, E., & Greitemeier, D. (2012) · Materials Letters · doi:10.1016/j.matlet.2012.04.116 · Cited by 121
Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
Zhang, S., Li, J. F., Sun, J., & Jiang, F. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2077-9 · Cited by 99
Laser rapid manufacturing of Colmonoy-6 components
Paul, C. P., Jain, A., Ganesh, P., et al. (2005) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2005.08.005 · Cited by 98
Surface carburizing of Ti–6Al–4V alloy by laser melting
Saleh, A. F., Abboud, J. H., & Benyounis, K. Y. (2009) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2009.11.001 · Cited by 86
Effect of beam diameter on pulsed laser polishing of S7 tool steel
Pfefferkorn, F. E., Duffie, N. A., Morrow, J. D., & Wang, Q. (2014) · CIRP Annals · doi:10.1016/j.cirp.2014.03.055 · Cited by 70
Surface prediction model for thermocapillary regime pulsed laser micro polishing of metals
Wang, Q., Morrow, J. D., Ma, C., Duffie, N. A., & Pfefferkorn, F. E. (2015) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2015.05.005 · Cited by 58
Self-citationPetersen, R. C. (2014) · Metals · doi:10.3390/met4040549 · Cited by 49
Laser additive manufacture of titanium alloys
Wang, M., Lin, X., & Huang, W. (2015) · Materials Technology · doi:10.1179/1753555715y.0000000079 · Cited by 49
Guo, W., Hua, M., Tse, P. W.-T., & Mok, C. K. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3558-1 · Cited by 39
An industrial approach of laser polishing with different laser sources
Ukar, E., Lamíkiz, A., Liébana, F., Martı́nez, S., & Tabernero, I. (2015) · Materialwissenschaft und Werkstofftechnik · doi:10.1002/mawe.201500324 · Cited by 28
Nouari, M., Calamaz, M., & Girot, F. A. (2008) · Comptes Rendus Mécanique · doi:10.1016/j.crme.2008.07.007 · Cited by 25
Cited by
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Surface integrity in metal machining - Part II: Functional performance
la Monaca, A., Murray, J. W., Liao, Z., Speidel, A., Robles-Linares, J. A., Axinte, D. A., Hardy, M. C., & Clare, A. T. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103718 · Cited by 318
Geometrical metrology for metal additive manufacturing
Leach, R. K., Bourell, D., Carmignato, S., Donmez, A., Senin, N., & Dewulf, W. (2019) · CIRP Annals · doi:10.1016/j.cirp.2019.05.004 · Cited by 289
Development of Micro Selective Laser Melting: The State of the Art and Future Perspectives
Nagarajan, B., Hu, Z., Song, X., Zhai, W., & Wei, J. (2019) · Engineering · doi:10.1016/j.eng.2019.07.002 · Cited by 254
Mahmood, M. A., Chioibasu, D., Ur Rehman, A., Mihai, S., & Popescu, A. C. (2022) · Metals · doi:10.3390/met12010077 · Cited by 119
Metadata
- Authors
- Ma, C. P., Guan, Y. C., & Zhou, W.
- Venue
- Optics and Lasers in Engineering
- Publisher
- Elsevier BV
- Published
- 2017-06
- Volume
- 93
- Pages
- 171-177
- ISSN
- 0143-8166 (ISSN-L)
- OpenAlex
- W2590043834
- Cited by
- 296
- References
- 22
- FWCI
- 16.25
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.