The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Semi-supervised defect classification of steel surface based on multi-training and generative adversarial network
Open accessAbstract
Abstract Defect inspection is very important for guaranteeing the surface quality of industrial steel products, but related methods are based primarily on supervised learning which requires ample labeled samples for training. However, there can be no doubt that inspecting defects on steel surface is always a data-limited task due to difficult sample collection and expensive expert labeling. Unlike the previous works in which only labeled samples are treated using supervised classifiers, we propose a semi-supervised learning (SSL) defect classification approach based on multi-training of two different networks: a categorized generative adversarial network (GAN) and a residual network. This method uses the GAN to generate a large number of unlabeled samples. And then the multi-training algorithm that uses two classifiers based on different learning strategies is proposed to integrate both labeled and unlabeled into SSL process. Finally, through the multiple training process, our SSL method can acquire higher accuracy and better robustness than the supervised one using only limited labeled samples. Experimental results clearly demonstrate that the effectiveness of our proposed method, achieving the classification accuracy of 99.56%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
ImageNet: A large-scale hierarchical image database
Deng, J., Dong, W., Socher, R., Li, L.-J., Li, K., & Fei-Fei, L. (2009) · 2009 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2009.5206848 · Cited by 65,333
Unsupervised representation learning with deep convolutional generative adversarial networks
Radford, A., Metz, L., & Chintala, S. (2015) · arXiv · doi:10.48550/arxiv.1511.06434 · Cited by 12,235
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · arXiv · doi:10.48550/arxiv.1512.03385 · Cited by 4,196
Surface defect classification of steels with a new semi-supervised learning method
Di, H., Ke, X., Peng, Z., & Dongdong, Z. (2019) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2019.01.011 · Cited by 241
Generalized Completed Local Binary Patterns for Time-Efficient Steel Surface Defect Classification
Luo, Q., Sun, Y., Li, P., Simpson, O., Tian, L., & He, Y. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2852918 · Cited by 178
Self-citationAn End‐to‐End Steel Strip Surface Defects Recognition System Based on Convolutional Neural Networks
Yi, L., Li, G., & Jiang, M. (2017) · steel research international · doi:10.1002/srin.201600068 · Cited by 173
Classification of surface defects on steel sheet using convolutional neural networks
Zhou, S., Chen, Y., Zhang, D., Xie, J., & Zhou, Y. (2017) · Materiali in tehnologije · doi:10.17222/mit.2015.335 · Cited by 130
Cited by
Dong, H., Song, K., He, Y., Xu, J., Yan, Y., & Meng, Q. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2958826 · Cited by 559
Self-citationSurface Defect Detection Methods for Industrial Products: A Review
Chen, Y., Ding, Y., Zhao, F., Zhang, E., Wu, Z., & Shao, L. (2021) · Applied Sciences · doi:10.3390/app11167657 · Cited by 457
Defect Detection Methods for Industrial Products Using Deep Learning Techniques: A Review
Saberironaghi, A., Ren, J., & El-Gindy, M. (2023) · Algorithms · doi:10.3390/a16020095 · Cited by 317
Review of surface defect detection of steel products based on machine vision
Tang, B., Chen, L., Sun, W., & Lin, Z. (2023) · IET Image Processing · doi:10.1049/ipr2.12647 · Cited by 271
Steel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
Self-citation
Metadata
- Authors
- He, Y., Song, K., Dong, H., & Yan, Y.
- Venue
- Optics and Lasers in Engineering
- Publisher
- Elsevier BV
- Published
- 2019-11
- Volume
- 122
- Pages
- 294-302
- ISSN
- 0143-8166 (ISSN-L)
- OpenAlex
- W2953868242
- Cited by
- 171
- References
- 8
- FWCI
- 13.57
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.