The DOI matches its Crossref record; 84 of the 84 references it cites were found in a registry or an index.
Methanol as a fuel for internal combustion engines
Open accessAbstract
Abstract Transportation of people and goods largely relies on the use of fossil hydrocarbons, contributing to global warming and problems with local air quality. There are a number of alternatives to fossil fuels that can avoid a net carbon emission and can also decrease pollutant emissions. However, many have significant difficulty in competing with fossil fuels due to either limited availability, limited energy density, high cost, or a combination of these. Methanol (CH3OH) is one of these alternatives, which was demonstrated in large fleet trials during the 1980s and 1990s, and is currently again being introduced in various places and applications. It can be produced from fossil fuels, but also from biomass and from renewable energy sources in carbon capture and utilization schemes. It can be used in pure form or as a blend component, in internal combustion engines (ICEs) or in direct methanol fuel cells (DMFCs). These features added to the fact it is a liquid fuel, making it an efficient way of storing and distributing energy, make it stand out as one of the most attractive scalable alternatives. This review focuses on the use of methanol as a pure fuel or blend component for ICEs. First, we introduce methanol historically, briefly introduce the various methods for its production, and summarize health and safety of using methanol as a fuel. Then, we focus on its use as a fuel for ICEs. The current data on the physical and chemical properties relevant for ICEs are reviewed, highlighting the differences with fuels such as ethanol and gasoline. These are then related to the research reported on the behaviour of methanol and methanol blends in spark ignition and compression ignition engines. Many of the properties of methanol that are significantly different from those of for example gasoline (such as its high heat of vaporization) lead to advantages as well as challenges. Both are extensively discussed. Methanol’s performance, in terms of power output, peak and part load efficiency, and emissions formation is summarized, for so-called flex-fuel engines as well as for dedicated engines. We also briefly touch upon engine hardware changes and material compatibility. Methanol fuel reforming using engine waste heat is discussed, as a potential route towards further increases in efficiency and decreases in emissions. Next to the experimental work, research efforts into modelling the behaviour of methanol as a fuel are also reviewed, including mixture formation, normal and abnormal combustion. Methanol’s properties such as high latent heat, fast burning velocity, high knock-resistance and no carbon-to-carbon bonds are shown to leverage engine technology developments such as increased compression ratios, downsizing and dilution; enabling much increased engine efficiencies. Finally, we point out the current gaps in knowledge to indicate which areas future research should be directed at.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Internal combustion engine fundamentals
(1988) · Choice Reviews Online · doi:10.5860/choice.26-0943 · Cited by 16,694
Hansen Solubility Parameters: A User's Handbook
Hansen, C. M. (1999) · Thammasat University Digital Collections · Cited by 2,078
LANGE, N. A. (1944) · Soil Science · doi:10.1097/00010694-194407000-00013 · Cited by 1,582
Recycling of carbon dioxide to methanol and derived products – closing the loop
Goeppert, A., Czaun, M., Jones, J.-P., Surya Prakash, G. K., & Olah, G. A. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00122b · Cited by 1,528
Hydrogen-fueled internal combustion engines
Verhelst, S., & Wallner, T. (2009) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2009.08.001 · Cited by 1,521
Self-citationGugale, G. S., Pujari‐Palmer, S., Basutkar, P. H., Jadhav, S., Shinde, V., & Ubale, V. P. (2019) · Cited by 1,281
Beyond Oil and Gas: The Methanol Economy
Prakash, G. K. S. (2011) · ECS Meeting Abstracts · doi:10.1149/ma2011-01/4/151 · Cited by 1,010
Sarathy, S. M., Oßwald, P., Hansen, N., & Kohse-Höinghaus, K. (2014) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2014.04.003 · Cited by 911
(1996) · Choice Reviews Online · doi:10.5860/choice.34-0939 · Cited by 897
Soot processes in compression ignition engines
Tree, D. R., & Svensson, K. I. (2007) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2006.03.002 · Cited by 853
Laminar burning velocity and Markstein lengths of methane–air mixtures
Gu, X.-J., Haq, M. Z., Lawes, M., & Woolley, R. M. (2000) · Combustion and Flame · doi:10.1016/s0010-2180(99)00142-x · Cited by 752
Lipatnikov, A. N., & Chomiak, J. (2002) · Progress in Energy and Combustion Science · doi:10.1016/s0360-1285(01)00007-7 · Cited by 582
Efficient methanol synthesis: Perspectives, technologies and optimization strategies
Bozzano, G., & Manenti, F. (2016) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2016.06.001 · Cited by 580
Electrofuels for the transport sector: A review of production costs
Brynolf, S., Taljegard, M., Grahn, M., & Hansson, J. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.05.288 · Cited by 562
Fuel design and management for the control of advanced compression-ignition combustion modes
Lü, X., Han, D., & Huang, Z. Y. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2011.03.003 · Cited by 542
Turbulent burning velocities: a general correlation in terms of straining rates
Abdel-Gayed, R. G., Bradley, D., & Lawes, M. (1987) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1987.0150 · Cited by 377
Comprehensive Renewable Energy
(2012) · Elsevier eBooks · doi:10.1016/c2010-1-68983-3 · Cited by 363
Four-Octane-Number Method for Predicting the Anti-Knock Behavior of Fuels and Engines
Douaud, A., & Eyzat, P. (1978) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/780080 · Cited by 336
Does a Hydrogen Economy Make Sense?
Bossel, U. (2006) · Proceedings of the IEEE · doi:10.1109/jproc.2006.883715 · Cited by 322
Study of spark ignition engine fueled with methanol/gasoline fuel blends
Liu, S., Cuty Clemente, E. R., Hu, T., & Wei, Y. (2007) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2006.12.024 · Cited by 321
Comparison of acute lethal toxicity of commonly abused psychoactive substances
Gable, R. S. (2004) · Addiction · doi:10.1111/j.1360-0443.2004.00744.x · Cited by 321
Fuel reforming in internal combustion engines
Tartakovsky, L., & Sheintuch, M. (2018) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2018.02.003 · Cited by 310
Ethanol's Energy Return on Investment: A Survey of the Literature 1990−Present
Hammerschlag, R. (2006) · Environmental Science & Technology · doi:10.1021/es052024h · Cited by 305
Combustion performance of bio-ethanol at various blend ratios in a gasoline direct injection engine
Turner, D., Xu, H., Cracknell, R. F., Natarajan, V., & Chen, X. (2011) · Fuel · doi:10.1016/j.fuel.2010.12.025 · Cited by 302
Sileghem, L., Alekseev, V. A., Vancoillie, J., et al. (2013) · Fuel · doi:10.1016/j.fuel.2013.05.049 · Cited by 290
Self-citationGas premixed combustion at high turbulence. Turbulent flame closure combustion model
Zimont, V. L. (2000) · Experimental Thermal and Fluid Science · doi:10.1016/s0894-1777(99)00069-2 · Cited by 289
High octane number ethanol–gasoline blends: Quantifying the potential benefits in the United States
Anderson, J. E., DiCicco, D. M., Ginder, J. M., Kramer, U., Leone, T. G., Raney-Pablo, H. E., & Wallington, T. J. (2012) · Fuel · doi:10.1016/j.fuel.2012.03.017 · Cited by 245
The Chemical Route to a Carbon Dioxide Neutral World
Martens, J. A., Bogaerts, A., De Kimpe, N., Jacobs, P. A., Marin, G. B., Rabaey, K., Saeys, M., & Verhelst, S. (2017) · ChemSusChem · doi:10.1002/cssc.201601051 · Cited by 222
Self-citationThe potential of methanol as a fuel for flex-fuel and dedicated spark-ignition engines
Vancoillie, J., Demuynck, J., Sileghem, L., Van De Ginste, M., Verhelst, S., Brabant, L., & Van Hoorebeke, L. (2013) · Applied Energy · doi:10.1016/j.apenergy.2012.05.065 · Cited by 221
Self-citationThe Future of the Hydrogen Economy: Bright or Bleak?
Bossel, U., Eliasson, B., & Taylor, G. (2003) · Cogeneration & Distributed Generation Journal · doi:10.1080/15453660309509023 · Cited by 210
Vapor Pressures of Alcohol−Gasoline Blends
Andersen, V. F., Anderson, J. E., Wallington, T. J., Mueller, S. A., & Nielsen, O. J. (2010) · Energy & Fuels · doi:10.1021/ef100254w · Cited by 200
China's growing methanol economy and its implications for energy and the environment
Yang, C.-J., & Jackson, R. B. (2012) · Energy Policy · doi:10.1016/j.enpol.2011.11.037 · Cited by 180
Multi-zone thermodynamic modelling of spark-ignition engine combustion – An overview
Verhelst, S., & Sheppard, C. G. W. (2009) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.01.002 · Cited by 169
Self-citationBeyond oil and gas: the methanol economy
(2006) · Focus on Catalysts · doi:10.1016/s1351-4180(06)71901-8 · Cited by 169
Energy Storage via Carbon-Neutral Fuels Made From CO$_{2}$, Water, and Renewable Energy
Pearson, R., Eisaman, M. D., Turner, J. W. G., Edwards, P. P., Jiang, Z., Кузнецов, В. Л., Littau, K. A., di Marco, L., & Taylor, S. R. G. (2011) · Proceedings of the IEEE · doi:10.1109/jproc.2011.2168369 · Cited by 157
Self-citationHigh Efficiency and Low Emissions from a Port-Injected Engine with Neat Alcohol Fuels
Brusstar, M., Stuhldreher, M., Swain, D. M., & Pidgeon, W. (2002) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2002-01-2743 · Cited by 153
Bromberg, L., & Cheng, W. (2010) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 152
Aleiferis, P. G., Serras-Pereira, J., & Richardson, D. (2013) · Fuel · doi:10.1016/j.fuel.2012.12.088 · Cited by 145
Vancoillie, J., Demuynck, J., Sileghem, L., Ginste, M. V. D., & Verhelst, S. (2012) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2012.03.145 · Cited by 142
Self-citationDistillation Curves for Alcohol−Gasoline Blends
Andersen, V. F., Anderson, J. E., Wallington, T. J., Mueller, S. A., & Nielsen, O. J. (2010) · Energy & Fuels · doi:10.1021/ef9014795 · Cited by 129
Haas, F. M., Chaos, M., & Dryer, F. L. (2009) · Combustion and Flame · doi:10.1016/j.combustflame.2009.08.012 · Cited by 119
Optimal Use of E85 in a Turbocharged Direct Injection Engine
Stein, R. A., House, C., & Leone, T. G. (2009) · SAE international journal of fuels and lubricants · doi:10.4271/2009-01-1490 · Cited by 115
Kumar, P., Dutta, K., Das, S., & Kundu, P. P. (2014) · International Journal of Energy Research · doi:10.1002/er.3163 · Cited by 115
Turner, J. W. G., Pearson, R., Dekker, E., Iosefa, B., Johansson, K., & Bergström, K. A. (2012) · Applied Energy · doi:10.1016/j.apenergy.2012.07.044 · Cited by 113
Self-citationWallner, T. (2011) · Journal of Engineering for Gas Turbines and Power · doi:10.1115/1.4002893 · Cited by 106
Insights relating to the autoignition characteristics of alcohol fuels
Yates, A. D. B., Bell, A., & Swarts, A. (2009) · Fuel · doi:10.1016/j.fuel.2009.06.037 · Cited by 104
Membrane systems for CO 2 capture and their integration with gas turbine plants
Carapellucci, R., & Milazzo, A. (2003) · Proceedings of the Institution of Mechanical Engineers Part A Journal of Power and Energy · doi:10.1243/095765003322407557 · Cited by 101
Methanol from atmospheric carbon dioxide: A liquid zero emission fuel for the future
Weimer, T., Schaber, K., Specht, M., & Bandi, A. (1996) · Energy Conversion and Management · doi:10.1016/0196-8904(95)00345-2 · Cited by 97
Hunwartzen, I. (1982) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/820002 · Cited by 86
A correlation for the laminar burning velocity for use in hydrogen spark ignition engine simulation
Verhelst, S., T’Joen, C., Vancoillie, J., & Demuynck, J. (2010) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2010.10.020 · Cited by 82
Self-citationDevelopment of a Naturally Aspirated Spark Ignition Direct-Injection Flex-Fuel Engine
Marriott, C., Wiles, M. A., Gwidt, J. M., et al. (2008) · SAE International Journal of Engines · doi:10.4271/2008-01-0319 · Cited by 81
Liu, H., Wang, Z., Long, Y., & Wang, J. (2015) · Fuel · doi:10.1016/j.fuel.2015.04.042 · Cited by 78
Poran, A., & Tartakovsky, L. (2017) · Energy · doi:10.1016/j.energy.2017.02.074 · Cited by 78
On the Nature of Particulate Emissions from DISI Engines at Cold-Fast-Idle
Ketterer, J. E., & Cheng, W. K. (2014) · SAE International Journal of Engines · doi:10.4271/2014-01-1368 · Cited by 77
Dual-Injection as a Knock Mitigation Strategy Using Pure Ethanol and Methanol
Daniel, R., Wang, C., Xu, H., Tian, G., & Richardson, D. (2012) · SAE international journal of fuels and lubricants · doi:10.4271/2012-01-1152 · Cited by 75
Liu, H., Wang, Z., Long, Y., Xiang, S., Wang, J., & Fatouraie, M. (2015) · Fuel · doi:10.1016/j.fuel.2015.06.059 · Cited by 70
Autoignition of methanol: Experiments and computations
Kumar, K., & Sung, C. (2011) · International Journal of Chemical Kinetics · doi:10.1002/kin.20546 · Cited by 70
Methanol as a Fuel: A Review with Bibliography
Hagen, D. L. (1977) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/770792 · Cited by 60
Performance and emissions of iso-stoichiometric ternary GEM blends on a production SI engine
Sileghem, L., Coppens, A., Casier, B., Vancoillie, J., & Verhelst, S. (2013) · Fuel · doi:10.1016/j.fuel.2013.09.043 · Cited by 60
Self-citationDevelopment and validation of a quasi-dimensional model for methanol and ethanol fueled SI engines
Vancoillie, J., Sileghem, L., & Verhelst, S. (2014) · Applied Energy · doi:10.1016/j.apenergy.2014.07.046 · Cited by 56
Self-citationPoran, A., & Tartakovsky, L. (2017) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2017.05.056 · Cited by 54
Alternative Fuel Motor Vehicle Tailpipe and Evaporative Emissions Composition and Ozone Potential
Black, F. M., Tejada, S. B., & Gurevich, M. (1998) · Journal of the Air & Waste Management Association · doi:10.1080/10473289.1998.10463715 · Cited by 48
Liquid Hydrogen Storage Systems Developed and Manufactured for the First Time for Customer Cars
Amaseder, F., & Krainz, G. (2006) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2006-01-0432 · Cited by 45
Turner, J. W. G., Pearson, R., Purvis, R., Dekker, E., Johansson, K., & Bergström, K. A. (2011) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2011-24-0113 · Cited by 45
Self-citationPearson, R., & Turner, J. W. G. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-087872-0.00522-9 · Cited by 44
Self-citationBoretti, A. A. (2012) · Energy Conversion and Management · doi:10.1016/j.enconman.2011.12.011 · Cited by 43
Yuen, P. K., Villaire, W., & Beckett, J. (2010) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2010-01-0729 · Cited by 41
Turner, J. W. G., Pearson, R., McGregor, M. A., Ramsay, J. M., Dekker, E., Iosefa, B., Dolan, G. A., Johansson, K., & Bergström, K. A. (2012) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2012-01-1279 · Cited by 35
Self-citationAlternative Fuels for Marine and Inland Waterways: An exploratory study
Moirangthem, K. (2016) · Joint Research Centre (European Commission) · doi:10.2790/227559 · Cited by 35
Synthetic carbonaceous fuels and feedstocks from oxides of carbon and nuclear power
Steinberg, M. (1978) · Fuel · doi:10.1016/0016-2361(78)90154-0 · Cited by 32
Downsizing Potential of Methanol Fueled DISI Engine with Variable Valve Timing and Boost Control
Nguyen, D.-K., Craeynest, T. V., Pillu, T., Coulier, J., & Verhelst, S. (2018) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2018-01-0918 · Cited by 31
Self-citationTurner, J. W. G., Pearson, R., Bell, A., de Goede, S., & Woolard, C. D. (2012) · SAE international journal of fuels and lubricants · doi:10.4271/2012-01-1586 · Cited by 24
Self-citationNguyen, D.-K., & Verhelst, S. (2017) · Energy & Fuels · doi:10.1021/acs.energyfuels.7b00691 · Cited by 22
Self-citationABC - alcohol based combustion engines. Challenges and opportunities
Bergstroem, K., Nordin, H. F., Koenigstein, A., Marriott, C., & Wiles, M. A. (2007) · OSTI OAI (U.S. Department of Energy Office of Scientific and Technical Information) · Cited by 22
Performance and Emissions of a SI Engine using Methanol-Water Blends
Sileghem, L., Huylebroeck, T., den Bulcke, A. V., Vancoillie, J., & Verhelst, S. (2013) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2013-01-1319 · Cited by 20
Self-citationCommercialization of Low Carbon Methanol
Bergins, C., Fox, E. L., Tran, K. C., & Wuebben, P. (2016) · ATZextra worldwide · doi:10.1007/s40111-015-0517-0 · Cited by 17
Strategies for introducing methanol as an alternative fuel for shipping
Dierickx, J., Beyen, J., Block, R., Hamrouni, M., Huyskens, P., Meichelböck, C., & Verhelst, S. (2018) · Ghent University Academic Bibliography (Ghent University) · doi:10.5281/zenodo.1456424 · Cited by 16
Self-citationIntegration of an E85 Reforming System into a Vehicle-Ready Package and Project Results
Fowler, J., Morgenstern, D., Sall, E. D., & Veinbergs, M. E. (2014) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2014-01-1191 · Cited by 15
The Indirect and Direct Conversion of CO2 into Higher Carbon Fuels
France, L. J., Edwards, P. P., Кузнецов, В. Л., & Al‐Megren, H. A. (2015) · Elsevier eBooks · doi:10.1016/b978-0-444-62746-9.00010-4 · Cited by 15
Laminar burning velocity measurement of hydrous methanol at elevated temperatures and pressures
Liang, K., & Stone, R. (2017) · Fuel · doi:10.1016/j.fuel.2017.05.060 · Cited by 15
Drive Cycle Analysis of Load Control Strategies for Methanol Fuelled ICE Vehicle
Naganuma, K., Vancoillie, J., Sileghem, L., Verhelst, S., Turner, J. W. G., Pearson, R., & Martens, K. (2012) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2012-01-1606 · Cited by 14
Self-citationNguyen, D.-K., & Verhelst, S. (2017) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2017-01-0539 · Cited by 14
Self-citationLiquid–liquid equilibria of water+ethanol+reformate
de Doz, M. B. G., Bonatti, C. M., & Sólimo, H. N. (2005) · Fluid Phase Equilibria · doi:10.1016/j.fluid.2004.11.013 · Cited by 11
Cohn, D. R., & Bromberg, L. (2018) · SAE technical papers on CD-ROM/SAE technical paper series · doi:10.4271/2018-01-0888 · Cited by 5
Cited by
A review of ammonia as a compression ignition engine fuel
Dimitriou, P., & Javaid, R. (2020) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2019.12.209 · Cited by 991
A review on alternative fuels in future energy system
Stančin, H., Mikulčić, H., Wang, X., & Duić, N. (2020) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2020.109927 · Cited by 475
(2021) · doi:10.1039/d0ee01545h · Cited by 409
Renewable methanol production from green hydrogen and captured CO2: A techno-economic assessment
Sollai, S., Porcu, A., Tola, V., Ferrara, F., & Pettinau, A. (2023) · Journal of CO2 Utilization · doi:10.1016/j.jcou.2022.102345 · Cited by 379
Garcia, G., Arriola, E., Chen, W.-H., & De Luna, M. D. (2021) · Energy · doi:10.1016/j.energy.2020.119384 · Cited by 373
Metadata
- Authors
- Verhelst, S., Turner, J. W., Sileghem, L., & Vancoillie, J.
- Venue
- Progress in Energy and Combustion Science
- Publisher
- Elsevier BV
- Published
- 2019-01
- Volume
- 70
- Pages
- 43-88
- ISSN
- 0360-1285 (ISSN-L)
- OpenAlex
- W2898011573
- Cited by
- 1,226
- References
- 84
- FWCI
- 36.15
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.