From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals
Open accessThe DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Ultra short laser pulses are used, when high requirements concerning machining quality are demanded. The cost- effectiveness plays an important role for a successful transfer of this technology into industrial applications. Therefore systems with longer ps-pulses could offer an attractive alternative compared to short ps- and fs systems. Beside fiber based systems with ∼50 ps pulse durations also small systems with sub-ns pulses are available today. In contrast to the dramatic drop of the material removal rate when the pulse duration is raised from 10 ps to 50 ps the impact is weaker for a further increase to 540 ps and the removal rate even increases when the pulse duration is raised to 1.4 ns. As no crater formation is observed and the surface quality is better than for 1.4 ns pulses, sub-ns pulses could be an attractive alternative to machine steel compared to fiber based systems with ∼50 ps pulse duration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Femtosecond, picosecond and nanosecond laser ablation of solids
Chichkov, B. N., Momma, C., Nolte, S., Alvensleben, F., & Tünnermann, A. (1996) · Applied Physics A Materials Science & Processing · doi:10.1007/bf01567637 · Cited by 3,066
Cited by
Surface Structuring with Ultra-short Laser Pulses: Basics, Limitations and Needs for High Throughput
Neuenschwander, B., Jaeggi, B., Schmid, M., & Hennig, G. (2014) · Physics Procedia · doi:10.1016/j.phpro.2014.08.017 · Cited by 194
“2b) one from machining squares [18,23] with different fluences.”
BackgroundSelf-citationThe Effect of Laser Pulse Widths on Laser—Ag Nanoparticle Interaction: Femto- to Nanosecond Lasers
Jeon, J.-W., Yoon, S., Choi, H., Kim, J., Farson, D., & Cho, S.-H. (2018) · Applied Sciences · doi:10.3390/app8010112 · Cited by 76
Dittrich, S., Streubel, R., McDonnell, C., Huber, H. P., Barcikowski, S., & Gökce, B. (2019) · Applied Physics A · doi:10.1007/s00339-019-2704-8 · Cited by 53
Metadata
- Authors
- Neuenschwander, B., Jaeggi, B., & Schmid, M.
- Venue
- Physics Procedia
- Publisher
- Elsevier BV
- Published
- 2013
- Volume
- 41
- Pages
- 794-801
- ISSN
- 1875-3892 (ISSN-L)
- OpenAlex
- W2014579138
- Cited by
- 47
- References
- 1
- FWCI
- 4.30
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals. https://app.cochat.ai/papers/10.1016/j.phpro.2013.03.150
- The paper
- Neuenschwander, B., Jaeggi, B., & Schmid, M. (2013). From fs to Sub-ns: Dependence of the Material Removal Rate on the Pulse Duration for Metals. Physics Procedia. https://doi.org/10.1016/j.phpro.2013.03.150
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.