The DOI matches its Crossref record; 71 of the 71 references it cites were found in a registry or an index.
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Open accessAbstract
The evolution of the new microstructures produced by two types of dynamic recrystallization is reviewed, including those brought about by severe plastic deformation (SPD). The microstructural changes taking place under these conditions and the associated mechanical behaviors are described. During the conventional discontinuous dynamic recrystallization (dDRX) that takes place at elevated temperatures, the new grains evolve by nucleation and growth in materials with low to medium stacking fault energies (SFE). On the other hand, new ultrafine grains can be produced in any material irrespective of the SFE by means of SPD at relatively low temperatures. These result from the gradual transformation of the dislocation sub-boundaries produced at low strains into ultrafine grains with high angle boundaries at large strains. This process, termed in situ or continuous dynamic recrystallization (cDRX), is still not perfectly understood. This is because many SPD methods provide data concerning the microstructural changes that take place but little information regarding the flow stress behavior. By contrast, multi-directional forging (MDF) provides both types of data concurrently. Recent studies of the deformation behavior of metals and alloys under SPD conditions, carried out using MDF as well as other SPD methods, are synthesized and the links between the microstructural and mechanical observations are examined carefully. Some models for grain formation under SPD conditions are discussed. Next, the post-dynamic recrystallization behavior, i.e. that of annealing after both dDRX and cDRX, is described. The differing annealing behaviors result from the differences in the natures of the deformed microstructures. Finally, an integrated recrystallization model for these phenomena, i.e. dynamic and static recrystallization of both the continuous and discontinuous types, is presented and discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Recrystallization and Related Annealing Phenomena
(2004) · Elsevier eBooks · doi:10.1016/b978-0-08-044164-1.x5000-2 · Cited by 7,407
Bulk nanostructured materials from severe plastic deformation
Valiev, R. Z., Islamgaliev, R. K., & Alexandrov, I. V. (2000) · Progress in Materials Science · doi:10.1016/s0079-6425(99)00007-9 · Cited by 6,478
Mechanical Behavior of Materials
Meyers, M. A., & Chawla, K. K. (2008) · Cambridge University Press eBooks · doi:10.1017/cbo9780511810947 · Cited by 3,376
Using high-pressure torsion for metal processing: Fundamentals and applications
Zhilyaev, A. P., & Langdon, T. G. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.03.002 · Cited by 2,997
Nabarro, F. R. N., Duesbery, M. S., Hirth, J. P., & Kubin, L. P. (1979) · Cited by 2,675
Current issues in recrystallization: a review
Doherty, R. D., Hughes, D. A., Humphreys, F. J., Jonas, J. J., Jensen, D. J., Kassner, M. E., King, W. E., McNelley, T. R., McQueen, H. J., & Rollett, A. D. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00424-3 · Cited by 2,397
Self-citationExtreme grain refinement by severe plastic deformation: A wealth of challenging science
Estrin, Y. Z., & Vinogradov, A. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.038 · Cited by 1,833
Producing bulk ultrafine-grained materials by severe plastic deformation
Valiev, R. Z., Estrin, Y., Horita, Z., Langdon, T. G., Zechetbauer, M. J., & Zhu, Y. T. (2006) · JOM · doi:10.1007/s11837-006-0213-7 · Cited by 1,641
Ultra-fine grained bulk aluminum produced by accumulative roll-bonding (ARB) process
Saito, Y., Tsuji, N., Utsunomiya, H., Sakai, T., & Hong, R. (1998) · Scripta Materialia · doi:10.1016/s1359-6462(98)00302-9 · Cited by 1,259
Self-citationCorrelation of plastic deformation and dynamic recrystallization in magnesium alloy ZK60
Galiyev, A., Kaibyshev, R. O., & Gottstein, G. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00020-9 · Cited by 1,217
Self-citationSize effects in materials due to microstructural and dimensional constraints: a comparative review
Arzt, E. (1998) · Acta Materialia · doi:10.1016/s1359-6454(98)00231-6 · Cited by 1,180
Paradox of Strength and Ductility in Metals Processed Bysevere Plastic Deformation
Valiev, R. Z., Alexandrov, I. V., Zhu, Y. T., & Lowe, T. C. (2002) · Journal of Materials Research · doi:10.1557/jmr.2002.0002 · Cited by 1,162
Strength and structure under hot-working conditions
Jonas, J. J., Sellars, C. M., & Tegart, W. J. M. (1969) · Metallurgical Reviews · doi:10.1179/mtlr.1969.14.1.1 · Cited by 1,147
Self-citationStructure and properties of ultrafine-grained materials produced by severe plastic deformation
Valiev, R. Z., Korznikov, A. V., & Mulyukov, R. R. (1993) · Materials Science and Engineering: A · doi:10.1016/0921-5093(93)90717-s · Cited by 1,057
Overview no. 35 Dynamic recrystallization: Mechanical and microstructural considerations
Sakai, T., & Jonas, J. J. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90049-x · Cited by 1,020
Self-citationPoliak, E. I., & Jonas, J. J. (1996) · Acta Materialia · doi:10.1016/1359-6454(95)00146-7 · Cited by 992
Self-citationHigh angle boundaries formed by grain subdivision mechanisms
Hughes, D. A., & Hansen, N. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00027-x · Cited by 924
A model of continuous dynamic recrystallization
GOURDET, S., & Montheillet, F. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00078-8 · Cited by 903
Large strain work hardening and textures
Gil Sevillano, J., van Houtte, P., & Aernoudt, E. (1980) · Progress in Materials Science · doi:10.1016/0079-6425(80)90001-8 · Cited by 814
Strength and structure under hot-working conditions
Jonas, J. J., Sellars, C. M., & Tegart, W. J. M. (1969) · International Materials Reviews · doi:10.1179/095066069790138056 · Cited by 799
Self-citationMechanical behavior of materials
(2009) · Choice Reviews Online · doi:10.5860/choice.46-6830 · Cited by 737
ARB (Accumulative Roll‐Bonding) and other new Techniques to Produce Bulk Ultrafine Grained Materials
Tsuji, N., Saito, Y., Lee, S., et al. (2003) · Advanced Engineering Materials · doi:10.1002/adem.200310077 · Cited by 650
Structure and deformaton behaviour of Armco iron subjected to severe plastic deformation
Valiev, R. Z., Ivanisenko, Y., Rauch, E. F., & BAUDELET, B. (1996) · Acta Materialia · doi:10.1016/s1359-6454(96)00156-5 · Cited by 648
The Avrami kinetics of dynamic recrystallization
Jonas, J. J., Quelennec, X., Jiang, L., & Martin, É. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.02.033 · Cited by 629
Self-citationAn experimental study of the recrystallization mechanism during hot deformation of aluminium
GOURDET, S., & Montheillet, F. (2000) · Materials Science and Engineering A · doi:10.1016/s0921-5093(00)00733-4 · Cited by 583
Dynamic recrystallization in nickel and nickel-iron alloys during high temperature deformation
Luton, M. J., & Sellars, C. M. (1969) · Acta Metallurgica · doi:10.1016/0001-6160(69)90049-2 · Cited by 565
Necklace formation during dynamic recrystallization: mechanisms and impact on flow behavior
Ponge, D., & Gottstein, G. (1998) · Acta Materialia · doi:10.1016/s1359-6454(97)00233-4 · Cited by 478
Initiation of Dynamic Recrystallization in Constant Strain Rate Hot Deformation
Poliak, E. I., & Jonas, J. J. (2003) · ISIJ International · doi:10.2355/isijinternational.43.684 · Cited by 472
Self-citationThe recrystallization process in some polycrystalline metals
Bailey, J. E., & Hirsch, P. B. (1962) · Proceedings of the Royal Society of London A Mathematical and Physical Sciences · doi:10.1098/rspa.1962.0080 · Cited by 469
Zherebtsov, S., Murzinova, M., Salishchev, G., & Semiatin, S. L. (2011) · Acta Materialia · doi:10.1016/j.actamat.2011.03.037 · Cited by 451
Continuous processing of ultrafine grained Al by ECAP–Conform
Raab, G. I., Valiev, R. Z., Lowe, T. C., & Zhu, Y. T. (2004) · Materials Science and Engineering A · doi:10.1016/j.msea.2004.04.021 · Cited by 444
The dependence of grain size on stress during dynamic recrystallisation
Derby, B. (1991) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(91)90295-c · Cited by 404
Recovery and Recrystallization during High Temperature Deformation
McQueen, H. J., & Jonas, J. J. (1975) · Treatise on materials science and technology · doi:10.1016/b978-0-12-341806-7.50014-3 · Cited by 385
Self-citationDeveloping stable fine–grain microstructures by large strain deformation
Humphreys, F. J., Prangnell, P. B., Bowen, J. R., Gholinia, A., & Harris, C. (1999) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.1999.0395 · Cited by 373
Axial stresses and texture development during the torsion testing of Al, Cu and α-Fe
Montheillet, F., Cohen, M., & Jonas, J. J. (1984) · Acta Metallurgica · doi:10.1016/0001-6160(84)90187-1 · Cited by 358
Self-citationDynamic Recrystallization in Pure Magnesium
Шамилевич, С. О., & Kaibyshev, R. O. (2001) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.42.1928 · Cited by 352
Self-citationNucleation and microtexture development under dynamic recrystallization of copper
Wusatowska-Sarnek, A. M., Miura, H., & Sakai, T. (2002) · Materials Science and Engineering A · doi:10.1016/s0921-5093(01)01336-3 · Cited by 279
Self-citationA model of grain fragmentation based on lattice curvature
Tóth, L. S., Estrin, Y., Lapovok, R., & Gu, C. (2009) · Acta Materialia · doi:10.1016/j.actamat.2009.11.020 · Cited by 260
Belyakov, A. N., Tsuzaki, K., Miura, H., & Sakai, T. (2003) · Acta Materialia · doi:10.1016/s1359-6454(02)00476-7 · Cited by 241
Self-citationRecrystallization of metals during hot deformation
Sellars, C. M. (1978) · Philosophical Transactions of the Royal Society of London Series A Mathematical and Physical Sciences · doi:10.1098/rsta.1978.0010 · Cited by 241
Predicting the Critical Stress for Initiation of Dynamic Recrystallization
Najafizadeh, A., & Jonas, J. J. (2006) · ISIJ International · doi:10.2355/isijinternational.46.1679 · Cited by 225
Self-citationContinuous recrystallization in austenitic stainless steel after large strain deformation
Belyakov, A. N., Sakai, T., Miura, H., Kaibyshev, R. O., & Tsuzaki, K. (2002) · Acta Materialia · doi:10.1016/s1359-6454(02)00013-7 · Cited by 194
Self-citationDynamic Evolution of New Grains in Magnesium Alloy AZ31 during Hot Deformation
Yang, X., Miura, H., & Sakai, T. (2003) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.44.197 · Cited by 193
Self-citationMagnesium Alloys - Design, Processing and Properties
(2011) · InTech eBooks · doi:10.5772/560 · Cited by 189
Geometric dynamic recrystallization in hot torsion of Al5Mg0.6Mn (AA5083)
Blum, W., Zhu, Q., Merkel, R., & McQueen, H. J. (1996) · Materials Science and Engineering A · doi:10.1016/0921-5093(95)09990-5 · Cited by 188
Beladi, H., Cizek, P., & Hodgson, P. D. (2009) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-009-9799-z · Cited by 161
Salishchev, G. A., Valiakhmetov, O. R., & Galeyev, R. M. (1993) · Journal of Materials Science · doi:10.1007/bf00354692 · Cited by 149
Influence of ultra-high strains at elevated temperatures on the microstructure of aluminium. Part I
Solberg, J. K., McQueen, H. J., Ryum, N., & Nes, E. (1989) · Philosophical magazine. A/Philosophical magazine. A. Physics of condensed matter. Structure, defects and mechanical properties · doi:10.1080/01418618908213872 · Cited by 146
Strain-induced grain evolution in polycrystalline copper during warm deformation
Belyakov, A. N., Gao, W., Miura, H., & Sakai, T. (1998) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-998-0203-1 · Cited by 132
Self-citationUltrafine Grain Formation in Ferritic Stainless Steel during Severe Plastic Deformation
Sakai, T., Belyakov, A. N., & Miura, H. (2008) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-008-9556-8 · Cited by 131
Self-citationRecrystallization of high carbon steel between intervals of high temperature deformation
Djaic, R. A. P., & Jonas, J. J. (1973) · Metallurgical Transactions · doi:10.1007/bf02648720 · Cited by 128
Self-citationZherebtsov, S. V., Salishchev, G. A., Galeyev, R. M., & MAEKAWA, K. (2005) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.46.2020 · Cited by 125
Nano-grain evolution in austenitic stainless steel during multi-directional forging
Nakao, Y., & Miura, H. (2010) · Materials Science and Engineering A · doi:10.1016/j.msea.2010.10.018 · Cited by 119
Self-citationTsuzaki, K., Huang, X., & Maki, T. (1996) · Acta Materialia · doi:10.1016/1359-6454(96)00080-8 · Cited by 105
Dynamic recrystallization of copper polycrystals with different purities
Gao, W., Belyakov, A. N., Miura, H., & Sakai, T. (1999) · Materials Science and Engineering A · doi:10.1016/s0921-5093(99)00004-0 · Cited by 97
Self-citationOn deformation-induced continuous recrystallization in a superplastic AlLiCuMgZr alloy
Liu, Q., Xiaoxu, H., Mei, Y., & Jinfeng, Y. (1992) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(92)90118-x · Cited by 91
Continuous Dynamic Recrystallization in a Superplastic 7075 Aluminum Alloy
Yang, X., Miura, H., & Sakai, T. (2002) · MATERIALS TRANSACTIONS · doi:10.2320/matertrans.43.2400 · Cited by 86
Self-citationGrain refinement in coarse-grained 7475 Al alloy during severe hot forging
Шамилевич, С. О., Sakai, T., Goloborodko, A., Miura, H., & Kaibyshev, R. O. (2005) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430412331325049 · Cited by 85
Self-citationШамилевич, С. О., Sakai, T., Miura, H., & Hama, C. (2009) · Materials Science and Engineering A · doi:10.1016/j.msea.2009.03.037 · Cited by 81
Self-citationDynamic recrystallization in ultra fine-grained 304 stainless steel
Belyakov, A. N., Miura, H., & Sakai, T. (2000) · Scripta Materialia · doi:10.1016/s1359-6462(00)00373-0 · Cited by 77
Self-citationSolute drag effects during the dynamic recrystallization of nickel
Gall, R. L., & Jonas, J. J. (1999) · Acta Materialia · doi:10.1016/s1359-6454(99)00319-5 · Cited by 71
Self-citationDynamic recrystallization and dynamic recovery in pure aluminum at 583K
Yamagata, H. (1995) · Acta Metallurgica et Materialia · doi:10.1016/0956-7151(94)00267-l · Cited by 68
Modelling oriented nucleation and selective growth during dynamic recrystallization
Jonas, J. J., & Tóth, L. S. (1992) · Scripta Metallurgica et Materialia · doi:10.1016/0956-716x(92)90147-7 · Cited by 66
Self-citationEffect of Grain-Boundary Misorientation on Dynamic Recrystallization of Cu-Si Bicrystals
Miura, H., Aoyama, H., & Sakai, T. (1994) · Journal of the Japan Institute of Metals and Materials · doi:10.2320/jinstmet1952.58.3_267 · Cited by 66
Self-citationNucleation of dynamic recrystallization at triple junctions in polycrystalline copper
Miura, H., Sakai, T., Andiarwanto, S., & Jonas, J. J. (2005) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786430500154257 · Cited by 59
Self-citationDynamic evolution of fine grained structure and superplasticity of 7075 aluminum alloy
Sakai, T., Yang, X., & Miura, H. (1997) · Materials Science and Engineering A · doi:10.1016/s0921-5093(97)00398-5 · Cited by 47
Self-citationModelling the texture changes produced by dynamic recrystallization
Tóth, L. S., & Jonas, J. J. (1992) · Scripta Metallurgica et Materialia · doi:10.1016/0956-716x(92)90526-k · Cited by 47
Self-citationEffect of Initial Grain Size on Dynamic Recrystallization of Pure Nickel
Ohashi, M., Endo, T., & Sakai, T. (1990) · Journal of the Japan Institute of Metals and Materials · doi:10.2320/jinstmet1952.54.4_435 · Cited by 26
Self-citationHildenbrand, A., Tóth, L. S., Molinari, A., Baczynski, J., & Jonas, J. J. (1999) · Acta Materialia · doi:10.1016/s1359-6454(98)00384-x · Cited by 23
Self-citationCetlin, P. R., Yue, S., Jonas, J. J., & Maccagno, T. M. (1993) · Metallurgical Transactions A · doi:10.1007/bf02646595 · Cited by 22
Self-citationUltrafine Grain Formation in Aluminum Alloys during Hot Severe Plastic Deformation
Sakai, T., & Miura, H. (2012) · Materials science forum · doi:10.4028/www.scientific.net/msf.706-709.1829 · Cited by 8
Self-citation
Cited by
A review of dynamic recrystallization phenomena in metallic materials
Huang, K., & Logé, R. E. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.09.012 · Cited by 2,404
Heidarzadeh, A., Mironov, S., Kaibyshev, R., Çam, G., Simar, A., Gerlich, A., Khodabakhshi, F., Mostafaei, A., Field, D. P., Robson, J. D., et al. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100752 · Cited by 1,048
Self-citationHuang, K., Marthinsen, K., Zhao, Q., & Logé, R. E. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.004 · Cited by 788
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Structural evolutions of metallic materials processed by severe plastic deformation
Cao, Y., Ni, S., Liao, X., Song, M., & Zhu, Y. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.06.001 · Cited by 633
Metadata
- Authors
- Sakai, T., Belyakov, A., Kaibyshev, R., Miura, H., & Jonas, J. J.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2014-03
- Volume
- 60
- Pages
- 130-207
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2013289273
- Cited by
- 2,772
- References
- 71
- FWCI
- 99.04
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.