The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.
Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications
Open accessAbstract
Abstract Next-generation nuclear reactor concepts and advanced techniques for reprocessing spent nuclear fuel (SNF) are drawing great attention in the nuclear field. Molten halide salts have been proposed as the fuel solvent and coolants for many molten salt reactor (MSR) concepts, and the electrolyte for the electrochemical separation of the SNF. The major concern of using molten salts is the corrosion of the structural materials imposed by these extreme environments. Materials corrosion is more challenging in the molten salt nuclear systems than in the traditional water reactors as the formation of the passivating oxide layer on the corrosion resistant alloys becomes thermodynamically unfavorable in molten salts and the use of many corrosion resistant alloys is restricted. This review takes a comprehensive approach covering all relevant work in the field: corrosion data accumulated since the 1950s to date, major corrosion problems and corresponding mechanisms, metallurgical factors, historical development of corrosion resistant alloys and recent attempts. The key environmental factors influencing corrosion in various nuclear systems, electrode kinetics, thermodynamic properties, and corrosion prevention techniques are also reviewed. Finally, current progress and challenges are summarized with an attempt at identifying knowledge gaps and future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Electrochemical Methods: Fundamentals and Applications
Bard, A. J., & Faulkner, L. R. (1980) · Cited by 22,822
Principles and prevention of corrosion
Jones, D. A. (1991) · Cited by 2,104
Materials corrosion in molten LiF–NaF–KF salt
Olson, L. C., Ambrosek, J. W., Sridharan, K., Anderson, M. H., & Allen, T. R. (2009) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2008.05.008 · Cited by 479
Experience with the Molten-Salt Reactor Experiment
Haubenreich, P. N., & Engel, J. R. (1970) · Nuclear Applications · doi:10.13182/nt8-2-118 · Cited by 456
Janz, G. J., Gardner, G. L., Krebs, U., & Tomkins, R. P. T. (1974) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.3253134 · Cited by 325
The Molten Salt Reactor Adventure
MacPherson, H. G. (1985) · Nuclear Science and Engineering · doi:10.13182/nse90-374 · Cited by 316
Janz, G. J., Tomkins, R. P. T., Allen, C. B., Downey, J. R., Garner, G. L., Krebs, U., & Singer, S. K. (1975) · Journal of Physical and Chemical Reference Data · doi:10.1063/1.555527 · Cited by 307
Engineering Database of Liquid Salt Thermophysical and Thermochemical Properties
Sohal, M. S., Ebner, M. A., Sabharwall, P., & Sharpe, P. (2010) · doi:10.2172/980801 · Cited by 303
Molten fluorides for nuclear applications
Delpech, S., Cabet, C., Slim, C., & Picard, G. S. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70222-4 · Cited by 257
Corrosion of alloys in a chloride molten salt (NaCl-LiCl) for solar thermal technologies
Gomez-Vidal, J. C., & Tirawat, R. (2016) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2016.05.052 · Cited by 240
Electrochemical Reduction of UO[sub 2] in Molten CaCl[sub 2] or LiCl
Sakamura, Y., Kurata, M., & Inoue, T. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2160430 · Cited by 195
Sridharan, K., & Allen, T. R. (2013) · Molten Salts Chemistry · doi:10.1016/b978-0-12-398538-5.00012-3 · Cited by 185
Kawahara, Y. (2002) · Corrosion Science · doi:10.1016/s0010-938x(01)00058-0 · Cited by 184
Vignarooban, K., Pugazhendhi, P., Tucker, C., et al. (2014) · Solar Energy · doi:10.1016/j.solener.2014.02.002 · Cited by 179
Liu, S., Liu, Z., Wang, Y., & Tang, J. J. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.03.012 · Cited by 160
Molten Salts: From Fundamentals to Applications
(2002) · Springer eBooks · doi:10.1007/978-94-010-0458-9 · Cited by 129
Vidal, J., Fernández, Á. G., Tirawat, R., Turchi, C. S., & Huddleston, W. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.02.019 · Cited by 122
Electrochemical behavior of a platinum anode for reduction of uranium oxide in a LiCl molten salt
Jeong, S. M., Shin, H. S., Cho, S., Hur, J., & Lee, H. S. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.05.080 · Cited by 115
Ruh, A., & Spiegel, M. (2005) · Corrosion Science · doi:10.1016/j.corsci.2005.02.015 · Cited by 113
Ignatiev, V. V., Feynberg, O. S., Gnidoi, I. P., et al. (2013) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2013.09.004 · Cited by 111
Effects of the oxidants H 2 O and CrF 3 on the corrosion of pure metals in molten (Li,Na,K)F
Wang, Y. L., Wang, Q., Liu, H. J., & Zeng, C. L. (2015) · Corrosion Science · doi:10.1016/j.corsci.2015.11.032 · Cited by 110
High-Temperature Oxidation and Corrosion of Structural Materials in Molten Chlorides
Indacochea, J. E., Smith, J. L., Litko, K. R., Karell, E. J., & Rarez, A. G. (2001) · Oxidation of Metals · doi:10.1023/a:1010333407304 · Cited by 106
Wang, J., Zhang, C.-Z., Li, Z.-H., Zhou, H., He, J., & Yu, J.-C. (2017) · Solar Energy Materials and Solar Cells · doi:10.1016/j.solmat.2017.02.020 · Cited by 106
Electrochemistry of molten salt corrosion
Nishikata, A., Numata, H., & Tsuru, T. (1991) · Materials Science and Engineering A · doi:10.1016/0921-5093(91)90265-o · Cited by 103
Nickel-plating for active metal dissolution resistance in molten fluoride salts
Olson, L. C., Sridharan, K., Anderson, M. H., & Allen, T. R. (2011) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2011.01.032 · Cited by 97
Hofmeister, M., Klein, L., Miran, H., Rettig, R., Virtanen, S., & Singer, R. F. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.09.009 · Cited by 95
Pelton, A. D., & Chartrand, P. (2001) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-001-0227-2 · Cited by 92
Intergranular corrosion of high temperature alloys in molten fluoride salts
Olson, L. C., Sridharan, K., Anderson, M. H., et al. (2010) · Materials at High Temperatures · doi:10.3184/096034010x12743509428336 · Cited by 83
High-temperature corrosion of helium ion-irradiated Ni-based alloy in fluoride molten salt
Zhu, H., Holmes, R., Hanley, T. L., Davis, J., Short, K. T., & Edwards, L. (2014) · Corrosion Science · doi:10.1016/j.corsci.2014.11.013 · Cited by 80
Corrosion performance of ferrous and refractory metals in molten salts under reducing conditions
Indacochea, J. E., Smith, J. L., Litko, K. R., et al. (1999) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.1999.0268 · Cited by 79
Corrosion of Incoloy 800H alloys with nickel cladding in FLiNaK salts at 850 °C
Dai, Q., Ye, X., Ai, H., Chen, S., Jiang, L., Liang, J.-P., Yu, K., Leng, B., Li, Z., & Zhou, X. (2018) · Corrosion Science · doi:10.1016/j.corsci.2018.01.026 · Cited by 77
Electrochemical study of the corrosion of a Ni-based alloy GH3535 in molten (Li,Na,K)F at 700°C
Wang, Y., Liu, H., Yu, G., et al. (2015) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2015.06.014 · Cited by 76
Alloys compatibility in molten salt fluorides: Kurchatov Institute related experience
Ignatiev, V. V., & Surenkov, A. I. (2013) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2013.05.007 · Cited by 76
Molten Salt Reactor Fuel and Coolant
Beneš, O., & Konings, R. J. M. (2012) · Elsevier eBooks · doi:10.1016/b978-0-08-056033-5.00062-8 · Cited by 66
Petti, D. A., Smolik, G. R., Simpson, M. F., et al. (2006) · Fusion Engineering and Design · doi:10.1016/j.fusengdes.2005.08.101 · Cited by 63
Corrosion of Nickel-Containing Alloys in Molten LiCl-KCl Medium
Shankar, A. R., Kanagasundar, A., & Mudali, U. K. (2012) · CORROSION · doi:10.5006/0627 · Cited by 61
Application of Electrochemical Reduction to Produce Metal Fuel Material from Actinide Oxides
Sakamura, Y., Omori, T., & Inoue, T. (2008) · Nuclear Technology · doi:10.13182/nt1162-169 · Cited by 58
Galvanic corrosion of pure metals in molten fluorides
Wang, Y., Liu, H. J., & Zeng, C. (2014) · Journal of Fluorine Chemistry · doi:10.1016/j.jfluchem.2014.05.010 · Cited by 57
Corrosion Behavior of Candidate Materials in Molten LiCl-KCl Salt Under Argon Atmosphere
Shankar, A. R., Thyagarajan, K., & Mudali, U. K. (2013) · CORROSION · doi:10.5006/0746 · Cited by 49
High Temperature Corrosion of Inconel 600 in NaCl-KCl Molten Salts
Salinas-Solano, G., Porcayo-Calderón, J., Gonzalez-Rodriguez, J. G., et al. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/696081 · Cited by 46
Internal Oxidation of Fe–Al Alloys in a KCl-Air Atmosphere at 650°C
Li, Y. S., & Spiegel, M. (2004) · Oxidation of Metals · doi:10.1023/b:oxid.0000025337.64394.bf · Cited by 41
Corrosion behavior of Fe–Ni–Cr alloys in the molten salt of LiCl–Li2O at high temperature
Cho, S. H., Zhang, J. S., Shin, Y., Park, S. W., & Park, H. S. (2003) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2003.10.011 · Cited by 40
Self-citationCombest, R., Levelut, M.-N., & Trémillon, B. (1978) · Electrochimica Acta · doi:10.1016/0013-4686(78)80006-1 · Cited by 38
Compatibility of structural materials with molten chloride mixture at high temperature
Hosoya, Y., Terai, T., Yoneoka, T., et al. (1997) · Journal of Nuclear Materials · doi:10.1016/s0022-3115(97)00175-x · Cited by 37
Афоничкин, В. К., Bovet, A. L., & Shishkin, V. Y. (2011) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2011.06.010 · Cited by 36
Corrosion of iron (ARMCO) in KCl-LiCI melts
Colom, F., & Bódalo, A. (1972) · Corrosion Science · doi:10.1016/s0010-938x(72)91224-3 · Cited by 36
Coupled study of the Molten Salt Fast Reactor core physics and its associated reprocessing unit
Doligez, X., Heuer, D., Merle, E., et al. (2013) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2013.09.009 · Cited by 29
Corrosion Behavior of Structural Materials in LiCl-KCl Molten Salt by Thermogravimetric Study
Rao, C. J., Shankar, A. R., Ajikumar, P. K., Kamruddin, M., Mallika, C., & Mudali, U. K. (2014) · CORROSION · doi:10.5006/1341 · Cited by 28
Multidimensional Modeling of Nickel Alloy Corrosion inside High Temperature Molten Salt Systems
Mehrabadi, B. A. T., Weidner, J. W., Garcia-Diaz, B. L., et al. (2016) · Journal of The Electrochemical Society · doi:10.1149/2.0411614jes · Cited by 28
Binary Systems. Part 4: Binary Systems from Mn-Mo to Y-Zr
Franke, P., & Neuschütz, D. (2006) · Springer eBooks · doi:10.1007/b76778 · Cited by 27
Brown, L. D., Abdulaziz, R., Simons, S. J. R., Inman, D., Brett, D. J. L., & Shearing, P. R. (2013) · Journal of Applied Electrochemistry · doi:10.1007/s10800-013-0611-9 · Cited by 21
Cho, S. H., Park, S. B., Lee, J., Hur, J. M., & Lee, H. S. (2011) · Journal of Nuclear Materials · doi:10.1016/j.jnucmat.2011.02.047 · Cited by 18
Cited by
Ding, W., & Bauer, T. (2021) · Engineering · doi:10.1016/j.eng.2020.06.027 · Cited by 348
Corrosion behaviour of 316 stainless steel in NaCl-KCl-MgCl2 salt vapour at 700°C
Liu, Q., Xu, H., Yin, H., Li, N., Wang, W., Li, L., Tang, Z., & Qian, Y. (2022) · Corrosion Science · doi:10.1016/j.corsci.2021.109921 · Cited by 50
Oxygen-accelerated corrosion of Alloy 800 in a molten LiCl-KCl-MgCl2 eutectic mixture
Rezvanian, M., Gholamzadeh, H., Daub, K., Long, F., Kish, J. R., Daymond, M. R., & Persaud, S. Y. (2026) · Corrosion Science · doi:10.1016/j.corsci.2025.113505 · Cited by 4
Metadata
- Authors
- Guo, S., Zhang, J., Wu, W., & Zhou, W.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2018-08
- Volume
- 97
- Pages
- 448-487
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W2803841354
- Cited by
- 437
- References
- 52
- FWCI
- 12.67
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.