The superior mechanical and physical properties of nanocarbon reinforced bulk composites achieved by architecture design – A review
The DOI matches its Crossref record; 222 of the 222 references it cites were found in a registry or an index.
Abstract
Abstract Nanocarbon materials, such as carbon nanotube and graphene, are reckoned as the ideal reinforcement for composites due to their extraordinary intrinsic properties. However, the commonly-used homogenous architecture could not guarantee an effective enhancement in the mechanical and physical properties and become the major technological barrier for practical applications. Fabrication of nanocarbon reinforced composites with special architecture such as laminate, alignment and network architecture has been reported to break through the limitations and improve the overall performance of the composites. In this review, we aim to: (1) systematically summarize the current preparation methods to achieve different types of architecture design in three classes of matrices (polymer, ceramic and metal); (2) analyze the mechanisms and the influence factors for the mechanical and physical properties (electrical and thermal conductivities) of the composites with different architecture types. Finally, we outline the main advances and outlooks for architecture design in nanocarbon reinforced composites.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–222 of 222
Using macroporous graphene networks to toughen ZrC–SiC ceramic
Cheng, Y., Hu, P., Zhou, S., Zhang, X., & Han, W. (2018) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2018.04.037 · Cited by 51
Self-citationIntragranular Dispersion of Carbon Nanotubes Comprehensively Improves Aluminum Alloys
So, K. P., Kushima, A., Park, J. G., Liu, X., Keum, D. H., Jeong, H. Y., Yao, F., Joo, S., Kim, H. S., Kim, H., et al. (2018) · Advanced Science · doi:10.1002/advs.201800115 · Cited by 50
Liu, X., Sun, X., Wang, Z., Shen, X., Wu, Y., & Kim, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06476 · Cited by 48
Lei, J., & Liu, Z. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.061 · Cited by 48
Yan, H., Wang, R., Li, Y., & Long, W. (2014) · Journal of Electronic Materials · doi:10.1007/s11664-014-3561-z · Cited by 46
Niu, Z., Ma, W., Li, J., Dong, H., Ren, Y., Zhao, D., Zhou, W., & Xie, S. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201532 · Cited by 46
Novel three-dimensional carbon nanotube networks as high performance thermal interface materials
Kong, Q., Bodelot, L., Lebental, B., Lim, Y. D., Shiau, L. L., Gusarov, B., Tan, C. W., Liang, K., Lu, C., Tan, C. S., et al. (2018) · Carbon · doi:10.1016/j.carbon.2018.02.052 · Cited by 46
Tuning electrical and thermal connectivity in multiwalled carbon nanotube buckypaper
Yang, K., He, J. P., Puneet, P., et al. (2010) · Journal of Physics Condensed Matter · doi:10.1088/0953-8984/22/33/334215 · Cited by 45
Xiong, D., Cao, M., Guo, Q., Tan, Z., Fan, G., Li, Z., & Zhang, D. (2016) · Scientific Reports · doi:10.1038/srep33801 · Cited by 44
Ashton, T. S., & Moore, A. L. (2017) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2017.08.047 · Cited by 44
Yu, Y., Huang, Q., Rhodes, S., et al. (2016) · Journal of the American Ceramic Society · doi:10.1111/jace.14569 · Cited by 42
Simsek, I. N. G., Nistal, A., García, E., Pérez-Coll, D., Miranzo, P., & Osendi, M. I. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.12.044 · Cited by 41
Wang, K., Wang, W., Wang, H., Liu, L., Xu, Z., Fu, H., Zhao, L., Zhang, X., Chen, L., & Zhao, Y. (2018) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2018.05.001 · Cited by 40
Self-citationMagnetically-induced alignment of graphene via Landau diamagnetism
Tian, B., Lin, W., Zhuang, P., Li, J., Shih, T., & Cai, W. (2018) · Carbon · doi:10.1016/j.carbon.2018.01.067 · Cited by 37
Preparation and properties of aligned graphene composites
Li, D., Liu, Y., Ma, H., Wang, Y., Wang, L., & Xie, Z. (2015) · RSC Advances · doi:10.1039/c5ra03486h · Cited by 24
In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics
Kocjan, A., Schmidt, R., Lazar, A., Prado‐Gonjal, J., Kovač, J., Logar, M., Mompean, F. J., García-Hernández, M., Ruiz‐Hitzky, E., & Wicklein, B. (2018) · Nanoscale · doi:10.1039/c8nr00717a · Cited by 23
Kong, Q., Qiu, L., Lim, Y. D., Tan, C. W., Liang, K., Lu, C., & Tay, B. K. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.03.090 · Cited by 22
Enhancing buckypaper conductivity through co-deposition with copper nanowires
Xing, Y., Zhang, X., Chen, H., Chen, M., & Li, Q. (2013) · Carbon · doi:10.1016/j.carbon.2013.05.030 · Cited by 19
Self-citationOtieno, G., Koós, A. A., Dillon, F., Yahya, N. A., Dancer, C. E. J., Hughes, G. M., Grobert, N., & Todd, R. I. (2015) · Acta Materialia · doi:10.1016/j.actamat.2015.08.045 · Cited by 13
Solvent evaporation induced self-assembly of graphene foam for thermally conductive polymers
Ma, J., Zhou, X., Ding, S., & Liu, Z. (2017) · RSC Advances · doi:10.1039/c7ra01670k · Cited by 13
Shuai, J., Xiong, L., Zhu, L. Z., et al. (2017) · Transactions of Nonferrous Metals Society of China · doi:10.1016/s1003-6326(17)60197-3 · Cited by 13
Nacre‐Inspired Graphene/Metal Hybrid by In Situ Cementation Reaction and Joule Heating
Fontoura, L., Nautiyal, P., Loganathan, A., Boesl, B., & Agarwal, A. K. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201800518 · Cited by 12
Cited by
Flexible thermoelectric materials and devices: From materials to applications
Zhang, L., Shi, X.-L., Yang, Y.-L., & Chen, Z.-G. (2021) · Materials Today · doi:10.1016/j.mattod.2021.02.016 · Cited by 454
Carbon Nanomaterials: Synthesis, Functionalization and Sensing Applications
Speranza, G. (2021) · Nanomaterials · doi:10.3390/nano11040967 · Cited by 418
Zhao, Z., Bai, P., Du, W., Liu, B., Pan, D., Das, R., Liu, C., & Guo, Z. (2020) · Carbon · doi:10.1016/j.carbon.2020.08.040 · Cited by 289
Zhang, M., Zhao, N., Yu, Q., Liu, Z., Qu, R., Zhang, J., Li, S., Ren, D., Berto, F., Zhang, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30873-9 · Cited by 267
Self-citation
Metadata
- Authors
- Zhang, X., Zhao, N., & He, C.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2020-08
- Volume
- 113
- Pages
- 100672
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3014525747
- Cited by
- 293
- References
- 222
- FWCI
- 15.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.