The DOI matches its Crossref record; 66 of the 66 references it cites were found in a registry or an index.
Shear localization in metallic materials at high strain rates
Open accessAbstract
Abstract Three factors govern adiabatic shear localization: strain hardening (or softening), strain-rate hardening, and thermal softening. It is typically associated with large shear strains (>1), high strain rates (103-107 s-1), and high temperatures (40-100% of melting point), all of which happen within narrow regions with widths of about 1-200 μm. It is often an undesirable phenomenon, leading to failure, but there are situations where it is desirable, e. g., the generation of machining chips. Here, we review the development of both theoretical and experimental achievements, from the initiation of shear bands to their propagation with emphasis on three aspects: novel experimental techniques, novel materials, and nano/microstructural effects. The principal characteristics of adiabatic shear bands in metallic materials at the nano- and micro-scale are described. Bands that were formerly identified as transformed actually consist of nanocrystalline/ultrafine grains. These grains result from the breakup of the microstructure by a rotational recrystallization process. The evolution of the microstructure inside shear bands and their interactions for hcp, bcc, and fcc alloys, high-entropy alloys, nanocrystalline alloys, and metallic glasses are analyzed mechanistically. The gaps in the field and opportunities for future research are identified. Modern experimental characterization and computational techniques enable a more profound and predictive understanding of adiabatic localization and its avoidance in advanced materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Carslaw, H. S., & Jaeger, J. C. (1947) · International Linear Collider · Cited by 19,877
Tranter, C. J. (1959) · Journal of the Mechanics and Physics of Solids · doi:10.1016/0022-5096(59)90029-8 · Cited by 18,388
Hirth, J. P., & Lothe, J. (1968) · Medical Entomology and Zoology · Cited by 9,770
Recrystallization and Related Annealing Phenomena
(2004) · Elsevier eBooks · doi:10.1016/b978-0-08-044164-1.x5000-2 · Cited by 7,407
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Meyers, M. A. (1994) · Wiley eBooks · doi:10.1002/9780470172278 · Cited by 3,282
Self-citationA microscopic mechanism for steady state inhomogeneous flow in metallic glasses
Spaepen, F. (1977) · Acta Metallurgica · doi:10.1016/0001-6160(77)90232-2 · Cited by 2,933
Effect of Strain Rate Upon Plastic Flow of Steel
Zener, C., & Hollomon, J. H. (1944) · Journal of Applied Physics · doi:10.1063/1.1707363 · Cited by 2,844
Plastic deformation in metallic glasses
Argon, A. S. (1979) · Acta Metallurgica · doi:10.1016/0001-6160(79)90055-5 · Cited by 2,720
Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics
Frost, H. J., & Ashby, M. F. (1982) · CERN Document Server (European Organization for Nuclear Research) · Cited by 2,462
Metadata
- Authors
- Yan, N., Li, Z., Xu, Y., & Meyers, M. A.
- Venue
- Progress in Materials Science
- Publisher
- Elsevier BV
- Published
- 2021-06
- Volume
- 119
- Pages
- 100755
- ISSN
- 0079-6425 (ISSN-L)
- OpenAlex
- W3109110860
- Cited by
- 296
- References
- 66
- FWCI
- 8.39
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Shear localization in metallic materials at high strain rates. https://app.cochat.ai/papers/10.1016/j.pmatsci.2020.100755
- The paper
- Yan, N., Li, Z., Xu, Y., & Meyers, M. A. (2021). Shear localization in metallic materials at high strain rates. Progress in Materials Science. https://doi.org/10.1016/j.pmatsci.2020.100755
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.