The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Two-phase bubbly flow simulation using CFD method: A review of models for interfacial forces
Abstract
Abstract The computational fluid dynamics (CFD) method has been widely adopted and accepted in the nuclear reactor safety analysis in the recent years. Especially, the application of computational multiphases fluid dynamics (CMFD) is very common in different industrial applications, and definitely in the pressurized water reactor (PWR). In two-phase bubbly flow simulation, the momentum exchange between the phases requires interfacial forces i.e., interfacial drag, lift, turbulent dispersion, wall lubrication, and virtual mass. In the past, numerous models were developed for these interfacial forces with reasonable accuracy. However, agreement on the generally applicable combination of models for these interfacial forces is yet to be achieved. The selection of proper models for these interfacial forces is very important to successfully predict the bubbles concentration distribution and velocity profile. Currently, the practice of interfacial forces model selection from numerous models is mostly ad-hoc based. Therefore, in this article current status of interfacial forces models within the prospect of two-phase bubbly flow CFD simulation are summarized and then parametric dependence, and ranges of applicability of these models are reviewed. Furthermore, some of the limitations of the models for these interfacial forces are determined and future recommendations are made.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Drag coefficient and relative velocity in bubbly, droplet or particulate flows
Ishii, M., & Zuber, N. (1979) · AIChE Journal · doi:10.1002/aic.690250513 · Cited by 2,031
Transverse migration of single bubbles in simple shear flows
Tomiyama, A., Tamai, H., Zun, I., & Hosokawa, S. (2002) · Chemical Engineering Science · doi:10.1016/s0009-2509(02)00085-4 · Cited by 1,085
Validation of CFD models for mono- and polydisperse air–water two-phase flows in pipes
Frank, T., Zwart, P. J., Krepper, E., Prasser, H.-M., & Lucas, D. (2008) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2007.02.056 · Cited by 237
On the drag force of bubbles in bubble swarms at intermediate and high Reynolds numbers
Roghair, I., Lau, Y. M., Deen, N. G., Slagter, H. M., Baltussen, M. W., Van Sint Annaland, M., & Kuipers, J. A. M. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2011.02.030 · Cited by 205
The Rise of Bubbles in a Vertical Shear Flow
Ervin, E. A., & Tryggvason, G. (1997) · Journal of Fluids Engineering · doi:10.1115/1.2819153 · Cited by 152
Assessment of turbulent dispersion models for bubbly flows in the low Stokes number limit
Moraga, F. J., Larreteguy, A. E., Drew, D. A., & Lahey, R. T. (2003) · International Journal of Multiphase Flow · doi:10.1016/s0301-9322(03)00018-1 · Cited by 75
Metadata
- Authors
- Khan, I., Wang, M., Zhang, Y., Tian, W., Su, G., & Qiu, S.
- Venue
- Progress in Nuclear Energy
- Publisher
- Elsevier BV
- Published
- 2020-07
- Volume
- 125
- Pages
- 103360
- ISSN
- 0149-1970 (ISSN-L)
- OpenAlex
- W3017201781
- Cited by
- 166
- References
- 6
- FWCI
- 14.11
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Two-phase bubbly flow simulation using CFD method: A review of models for interfacial forces. https://app.cochat.ai/papers/10.1016/j.pnucene.2020.103360
- The paper
- Khan, I., Wang, M., Zhang, Y., Tian, W., Su, G., & Qiu, S. (2020). Two-phase bubbly flow simulation using CFD method: A review of models for interfacial forces. Progress in Nuclear Energy. https://doi.org/10.1016/j.pnucene.2020.103360
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.