Effects of MgO catalyst on depolymerization of poly-l-lactic acid to l,l-lactide
Open accessThe DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Abstract
Abstract To control the depolymerization of poly- l -lactic acid (PLLA) into l,l -lactide, effects of altering the physical and chemical properties of magnesium oxide (MgO) on its ability as a catalyst were investigated. Four kinds of MgO particles: MgO-heavy, 0.2, 0.05, and 0.01 μm, having primary particles of different dimensions, surface areas, and chemical structures/species were used. Thermo-gravimetric profiles of PLLA/MgO composites shifted into a lower temperature range due to an increase in the catalytic surface area resulting from a decrease in the dimensions of the MgO particles. However, decreasing the dimensions caused frequent side reactions with unfavorable products: cyclic oligomers and meso -lactide, due to the presence of different chemical structures/species. Heat treatment of the MgO particles not only effectively suppressed the oligomer production and enhanced the l,l -lactide production, but also accelerated the meso -lactide production at lower temperatures. These results indicate that the surface properties of MgO considerably influence the depolymerization of PLLA, with the catalytic behavior of MgO controllable by heat treatment and selection of the depolymerization conditions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90035-7 · Cited by 404 · cited 1×
“many kinds of degradation products have been detected during the pyrolysis of PLLA [16,19],”
BackgroundAjioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322 · cited 1×
“Another serious difficulty with the feedstock recycling of PLLA is the racemization on lactate units, which generates optical isomers: meso- and D,D-lactides that cause serious problems on the reproduction of PLLA, diminishing its crystallizability (Scheme 1) and some other useful properties [16-18,20].”
BackgroundAjioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Bulletin of the Chemical Society of Japan · doi:10.1246/bcsj.68.2125 · Cited by 245
Effect of tin on poly(l-lactic acid) pyrolysis
Nishida, H., Mori, T., Hoshihara, S., Fan, Y., Shirai, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00152-6 · Cited by 176
Self-citationThermal stability of poly (l-lactide): influence of end protection by acetyl group
Fan, Y., Nishida, H., Shirai, Y., & Endo, T. (2004) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2003.10.004 · Cited by 104 · cited 1×
“Recently, the effects of including a trace amount of metal as a polymerization catalyst, such as Sn, were investigated with the aim of clarifying the diversity of degradation behavior exhibited by PLLA [22-24].”
BackgroundSelf-citation
Cited by
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
Lactic acid as a platform chemical in the biobased economy: the role of chemocatalysis
Dusselier, M., Van Wouwe, P., Dewaele, A., Makshina, E., & Sels, B. F. (2013) · Energy & Environmental Science · doi:10.1039/c3ee00069a · Cited by 827
Toward Infinitely Recyclable Plastics Derived from Renewable Cyclic Esters
Tang, X., & Chen, E. Y.-X. (2019) · Chem · doi:10.1016/j.chempr.2018.10.011 · Cited by 389
Development of materials and technologies for control of polymer recycling
Nishida, H. (2011) · Polymer Journal · doi:10.1038/pj.2011.16 · Cited by 94
Self-citationAriffin, H., Nishida, H., Shirai, Y., & Hassan, M. A. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.018 · Cited by 85
“Recent focus has been on monomer recovery from bio-based polymers, in particular, the depolymerization behavior of poly(L-lactic acid) (PLLA) into L-lactic acid and L,L-lactide, resulting in highly stereo-selective monomer recovery leading to the reproduction of PLLA [1].”
BackgroundInfluentialSelf-citation
Metadata
- Authors
- Motoyama, T., Tsukegi, T., Shirai, Y., Nishida, H., & Endo, T.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2007-07
- Volume
- 92
- Issue
- 7
- Pages
- 1350-1358
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2004711117
- Cited by
- 96
- References
- 6
- FWCI
- 2.09
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.