The DOI matches its Crossref record; 32 of the 32 references it cites were found in a registry or an index.
Physicochemical properties of PLA lignin blends
Open accessAbstract
Commercial alkali lignin (CL) and lignin extracted from almond shells by organosolv process (OL) were used for the preparation of blends with poly(lactic acid) (PLA) with different percentages (0.5, 1, 5, 10 and 20%) by extrusion method. Both lignins were acetylated to improve their compatibility with PLA. PLA/acetylated lignin blends exhibited greater compatibility than non-acetylated PLA/lignin. Characterization of lignins has been performed using HPLC, FT-IR, GPC, DSC and TGA. All lignins showed high purity. Acetylated lignins had lower Tg and higher thermal stability than original lignins. Thermal and mechanical properties of different blends were investigated. Morphology before and after hydrolytic degradations of blends with 5% of different lignins were also investigated. The addition of acetylated lignin appears to prevent hydrolytic degradation of PLA. Lignin content increased the thermal stability of PLA but does not favor the crystallization of PLA. Maximum strength decreased with high percentages of originals lignins. However, PLA/acetylated lignin blends remains fairly constant, even at high percentages. In all cases, the elongation at break was increased.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Lignin in straw of herbaceous crops
Buranov, A. U., & Mazza, G. (2008) · Industrial Crops and Products · doi:10.1016/j.indcrop.2008.03.008 · Cited by 805
Antioxidant properties of lignin in polypropylene
Pouteau, C., Dole, P., Cathala, B., Avérous, L., & Boquillon, N. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00057-0 · Cited by 434
Polylactide/montmorillonite nanocomposites: study of the hydrolytic degradation
Paul, M.-A., Delcourt, C., Alexandre, M., Degée, P., Monteverde, F., & Dubois, P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.10.011 · Cited by 326
Kadla, J. F., & Kubo, S. (2004) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2003.09.019 · Cited by 293
Gorrasi, G., & Pantani, R. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2013.02.005 · Cited by 290
Unmasking the structural features and property of lignin from bamboo
Wen, J.-L., Xue, B.-L., Xu, F., Sun, R.-C., & Pinkert, A. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.05.041 · Cited by 273
Potential of Lignins as Antioxidant Additive in Active Biodegradable Packaging Materials
Domenek, S., Louaifi, A., Guinault, A., & Baumberger, S. (2013) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0570-6 · Cited by 238
Morandim-Giannetti, A. A., Agnelli, J. A. M., Lanças, B. Z., Magnabosco, R., Casarin, S. A., & Bettini, S. H. P. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.041 · Cited by 235
Isolation and characterization of herbaceous lignins for applications in biomaterials
Monteil-Rivera, F., Phuong, M., Ye, M., Halasz, A., & Hawari, J. (2013) · Industrial Crops and Products · doi:10.1016/j.indcrop.2012.04.049 · Cited by 234
Graupner, N. (2008) · Journal of Materials Science · doi:10.1007/s10853-008-2762-3 · Cited by 199
LISPERGUER, J., PEREZ, P., & URIZAR, S. (2009) · Journal of the Chilean Chemical Society · doi:10.4067/s0717-97072009000400030 · Cited by 179
Fukushima, K., Tabuani, D., Dottori, M., Armentano, I., Kenny, J. M., & Camino, G. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.09.018 · Cited by 172
Structural, mechanical and barrier properties of active PLA–antioxidant films
Jamshidian, M., Tehrany, E. A., Imran, M., Akhtar, M. J., Cleymand, F., & Desobry, S. (2012) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.12.034 · Cited by 171
Saralegi, A., Rueda, L., Fernández‐d'Arlas, B., Mondragon, I., Eceiza, A., & Corcuera, M. A. (2013) · Polymer International · doi:10.1002/pi.4330 · Cited by 167
Ndazi, B. S., & Karlsson, S. (2011) · Express Polymer Letters · doi:10.3144/expresspolymlett.2011.13 · Cited by 166
Bhat, R., Abdullah, N., Din, R. H., & Tay, G. S. (2013) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2013.06.043 · Cited by 155
Lignin–polymer blends: evaluation of compatibility by image analysis
Pouteau, C., Baumberger, S., Cathala, B., & Dole, P. (2004) · Comptes Rendus Biologies · doi:10.1016/j.crvi.2004.08.008 · Cited by 151
Use of kraft lignin as filler for starch films
Baumberger, S., Lapierre, C., Monties, B. B., & Valle, G. D. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00193-6 · Cited by 140
Bertini, F., Canetti, M., Cacciamani, A., Elegir, G., Orlandi, M. E., & Zoia, L. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.03.009 · Cited by 122
Environmental degradation of lignin/poly(hydroxybutyrate) blends
Mousavioun, P., George, G. A., & Doherty, W. O. S. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.04.004 · Cited by 120
Biopolymer-based nanocomposites: effect of lignin acetylation in cellulose triacetate films
Nevárez, L. A. M., Ballinas‐Casarrubias, L., Celzard, A., Fierro, V., Muñoz, V. T., Camacho-Dávila, A., Torres‐Lubián, J. R., & González‐Sánchez, G. (2011) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/12/4/045006 · Cited by 108
Ouyang, W., Huang, Y., Luo, H., & Wang, D. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0359-4 · Cited by 92
Vanderghem, C., Richel, A., Jacquet, N., Blecker, C. S., & Paquot, M. (2011) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2011.07.022 · Cited by 89
Martínez, J. M., Reguant, J., Montero, M. Á., Montané, D., Salvadó, J., & Farriol, X. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960048e · Cited by 80
Han, S. O., Karevan, M., Sim, I. N., Bhuiyan, M. A. H., Jang, Y. H., Ghaffar, J., & Kalaitzidou, K. (2012) · International Journal of Polymer Science · doi:10.1155/2012/679252 · Cited by 76
Wang, K., Bauer, Š., & Sun, R. (2011) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf2037399 · Cited by 71
Roles and evidence of wood flour as an antibacterial promoter for triclosan-filled poly(lactic acid)
Prapruddivongs, C., & Sombatsompop, N. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.04.032 · Cited by 65
Chen, H., Chen, J., Chen, J., Yang, J., Huang, T. K., Zhang, N., & Wang, Y. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.07.037 · Cited by 55
Kaewtatip, K., Menut, P., Auvergne, R., Tanrattanakul, V., Morel, M., & Guilbert, S. (2010) · Journal of Agricultural and Food Chemistry · doi:10.1021/jf9042776 · Cited by 43
Mina, M. F., Beg, M. D. H., Islam, M. R., Nizam, A., Alam, A. K. M. M., & Yunus, R. M. (2013) · Polymer Engineering and Science · doi:10.1002/pen.23564 · Cited by 41
Zou, H., Yi, C., Wang, L., & Xu, W. (2009) · Polymer Bulletin · doi:10.1007/s00289-009-0191-3 · Cited by 31
Morphological and thermal properties of photodegradable biocomposite films
Pillai, S. K., Ray, S. S., Scriba, M. R., Ojijo, V. O., & Hato, M. J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38763 · Cited by 21
Cited by
Poly (lactic acid) blends: Processing, properties and applications
Nofar, M., Sacligil, D., Carreau, P. J., Kamal, M. R., & Heuzey, M.-C. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.12.002 · Cited by 780
Collins, M. N., Nechifor, M., Tanasă, F., Zănoagă, M., McLoughlin, A., Stróżyk, M. A., Culebras, M., & Teacă, C.-A. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.03.069 · Cited by 486
Lignin: A Review on Structure, Properties, and Applications as a Light-Colored UV Absorber
Zhang, Y., & Naebe, M. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.0c06998 · Cited by 469
Lignin-derived bio-based flame retardants toward high-performance sustainable polymeric materials
Yang, H., Yu, B., Xu, X., Bourbigot, S., Wang, H., & Song, P. (2020) · Green Chemistry · doi:10.1039/d0gc00449a · Cited by 461
Applications of Lignocellulosic Fibers and Lignin in Bioplastics: A Review
Yang, J., Ching, Y., & Chuah, C. (2019) · Polymers · doi:10.3390/polym11050751 · Cited by 438
Metadata
- Authors
- Gordobil, O., Egüés, I., Llano-Ponte, R., & Labidi, J.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2014-10
- Volume
- 108
- Pages
- 330-338
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2013080272
- Cited by
- 312
- References
- 32
- FWCI
- 10.10
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.