Novel polylactic acid (PLA)-organoclay nanocomposite bio-packaging for the cosmetic industry; migration studies and in vitro assessment of the dermal toxicity of migration extracts
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
The exploitation of polylactide (PLA) nanocomposites (which integrate organically modified clays (organoclays) into polymers) in packaging for the cosmetics industry could provide a biodegradable alternative to the use of conventional plastics. In this study nanocomposites with a PLA polymer matrix and clay fillers organically modified with the quaternary ammonium salts, hexadecyl trimethyl ammonium bromide (HDTA) or octadecyl trimethyl ammonium chloride (TMSA), were produced and tested for their safe use in cosmetic packaging. To address concerns over the potential release of constituents from such nanocomposites, levels of total overall migration in a range of simulants (e.g. vegetable oil, aqueous media, and cosmetic formulations) was assessed 10 days post incubation at 40 °C following EU-Plastics Regulation 10/2011 concerning materials and articles in contact with foodstuffs. Total overall migration levels calculated for all PLA nanocomposites tested (maximum of 0.88 ± 0.44 mg/dm2) were well below the total established legislative migration limit (10 mg/dm2). Toxicity of the nanocomposite migration extracts to the skin was assessed in vitro. Exposure of skin cells (HaCaT immortalized human keratinocytes) and a full thickness epidermal skin model (EpiDerm™) to migration extracts did not result in any significant loss in cell viability or skin irritation (OECD TG 439). The results therefore indicate that the levels of migration from the nanocomposite measured was low, and that the nanocomposite migration extracts stimulated minimal toxicity to the skin. Up until now, the hazard of migration extracts from polymer-organoclay nanocomposites following dermal exposure has not been investigated and thus our study addresses a gap in knowledge. These findings can inform the safe design of bio-based biodegradable nanocomposite packaging (used by the cosmetics, and other industries) in the future to promote a more sustainable and greener economy for the plastics industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradable polymers for food packaging: a review
Siracusa, V., Rocculi, P., Romani, S., & Rosa, M. D. (2008) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2008.07.003 · Cited by 2,126
Nanocomposites for food packaging applications
Azeredo, H. M. C. D. (2009) · Food Research International · doi:10.1016/j.foodres.2009.03.019 · Cited by 1,259
Polylactic acid (PLA) controlled delivery carriers for biomedical applications
Tyler, B., Gullotti, D., Mangraviti, A., Utsuki, T., & Brem, H. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.018 · Cited by 1,050
New polylactide/layered silicate nanocomposites. 1. Preparation, characterization, and properties
Sinha Ray, S., Maiti, P., Okamoto, M., Yamada, K., & Ueda, K. (2002) · Macromolecules · doi:10.1021/ma011613e · Cited by 607
Quaternary Ammonium Biocides: Efficacy in Application
Gerba, C. P. (2015) · Applied and Environmental Microbiology · doi:10.1128/aem.02633-14 · Cited by 561
New polylactide/layered silicate nanocomposites: Role of organoclays
Maiti, P., Yamada, K., Okamoto, M., Ueda, K., & Okamoto, K. (2002) · Chemistry of Materials · doi:10.1021/cm020391b · Cited by 409
Iñiguez-Franco, F., Auras, R., Burgess, G., Holmes, D., Fang, X., Rubino, M., & Soto-Valdez, H. (2016) · Polymer · doi:10.1016/j.polymer.2016.07.018 · Cited by 159
Ferk, F., Misik, M., Hoelzl, C., Uhl, M., Fuerhacker, M., Grillitsch, B., Parzefall, W., Nersesyan, A., Micieta, K., Grummt, T., et al. (2007) · Mutagenesis · doi:10.1093/mutage/gem027 · Cited by 119
Cited by
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
A review on PLA-based biodegradable materials for biomedical applications
Hussain, M., Khan, S. M., Shafiq, M., & Abbas, N. (2024) · Giant · doi:10.1016/j.giant.2024.100261 · Cited by 326
Biocosmetics: Technological Advances and Future Outlook
Goyal, N., & Jerold, F. (2021) · Environmental Science and Pollution Research · doi:10.1007/s11356-021-17567-3 · Cited by 191
Polylactic acid (PLA)-based multifunctional and biodegradable nanocomposites and their applications
Islam, M. S., Elahee, G. M. F., Fang, Y., Yu, X. (., Advincula, R. C., & Cao, C. (. (2025) · Composites Part B Engineering · doi:10.1016/j.compositesb.2025.112842 · Cited by 86
Metadata
- Authors
- Connolly, M., Zhang, Y., Brown, D. M., Ortuño, N., Jordá-Beneyto, M., Stone, V., Fernandes, T. F., & Johnston, H. J.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2019-10
- Volume
- 168
- Pages
- 108938
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2968707915
- Cited by
- 60
- References
- 8
- FWCI
- 2.06
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel polylactic acid (PLA)-organoclay nanocomposite bio-packaging for the cosmetic industry; migration studies and in vitro assessment of the dermal toxicity of migration extracts. https://app.cochat.ai/papers/10.1016/j.polymdegradstab.2019.108938
- The paper
- Connolly, M., Zhang, Y., Brown, D. M., Ortuño, N., Jordá-Beneyto, M., Stone, V., Fernandes, T. F., & Johnston, H. J. (2019). Novel polylactic acid (PLA)-organoclay nanocomposite bio-packaging for the cosmetic industry; migration studies and in vitro assessment of the dermal toxicity of migration extracts. Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2019.108938
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.