The DOI matches its Crossref record.
Biodegradation of plastics in soil: The effect of temperature
Open accessAbstract
The assessment of the intrinsic biodegradability of plastic materials is made under optimized environmental conditions in order not to limit the microbial growth and activity and follow the biodegradation process until completion. In particular, biodegradation tests are carried out at constant temperature in the range between 20 and 28 °C in order to favour the growth of mesophilic microorganisms. On the other hand, if the purpose is to predict the environmental fate of consumer or professional products made with biodegradable plastics after accidental or deliberate release into the environment, then the biodegradation rate attainable under less optimal conditions should be estimated. In this work pellets of a commercial biodegradable plastic material were tested for soil biodegradation at 28, 20, and 15 °C. The CO 2 evolution was followed for more than one year using the ASTM D 5988–18 test method. The mineralization rates (mg C/day, i.e. the amount of organic carbon converted into CO 2 per day) were determined by applying a linear regression from day 140 onwards on the organic carbon depletion curves, when the biodegradation reaction was constant. The specific mineralization rates, i.e. the rate per surface area unit (mg C/day/cm 2 ) were determined by dividing the mineralization rates by the available surface areas of the pellets tested. A thermal performance curve (TPC) was obtained by plotting the specific mineralization rates against the respective temperatures. The TPC curve was perfectly described by an exponential model that was in agreement with the Arrhenius equation. This suggests that biodegradation is dominated by simple thermodynamic effects in the tested temperature ranges (15–28 °C). The apparent activation energy of the biodegradation reaction was 108.7 kJ/mol. Using the TPC, it was possible to estimate the time needed for total mineralization of a product made with the test material with a given surface area when exposed to different temperatures. Clearly, the effective biodegradation rate was affected by other environmental factors (e.g. nutrients, pH, gas exchange, etc.) besides temperature. The current work indicates that temperature, an important environmental factor, affects biodegradation rates, in accordance with the Arrhenius equation. The observation that the apparent activation energy of the biodegradation reaction does not vary with temperature in the tested temperature range indicates a persistency in the metabolic activities of the involved mesophilic microbial communities.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Plastic wastes biodegradation: Mechanisms, challenges and future prospects
Ali, S. S., Elsamahy, T., Al-Tohamy, R., Zhu, D., Mahmoud, Y. A.-G., Koutra, E., Metwally, M. A., Kornaros, M., & Sun, J. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.146590 · Cited by 488
Microplastics generated from a biodegradable plastic in freshwater and seawater
Wei, X.-F., Bohlén, M., Lindblad, C., Hedenqvist, M., & Hakonen, A. (2021) · Water Research · doi:10.1016/j.watres.2021.117123 · Cited by 387
Dimassi, S. N., Hahladakis, J. N., Yahia, M. N. D., Ahmad, M. I., Sayadi, S., & Al-Ghouti, M. A. (2022) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2022.104262 · Cited by 286
Roadmap to Biodegradable Plastics—Current State and Research Needs
Ghosh, K., & Jones, B. H. (2021) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.1c00801 · Cited by 260
Matjašič, T., Simčič, T., Medvešček, N., Bajt, O., Dreo, T., & Mori, N. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2020.141959 · Cited by 229
Metadata
- Authors
- Pischedda, A., Tosin, M., & Degli-Innocenti, F.
- Venue
- Polymer Degradation and Stability
- Publisher
- Elsevier BV
- Published
- 2019-12
- Volume
- 170
- Pages
- 109017
- ISSN
- 0141-3910 (ISSN-L)
- OpenAlex
- W2981863617
- Cited by
- 207
- References
- 0
- FWCI
- 4.17
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biodegradation of plastics in soil: The effect of temperature. https://app.cochat.ai/papers/10.1016/j.polymdegradstab.2019.109017
- The paper
- Pischedda, A., Tosin, M., & Degli-Innocenti, F. (2019). Biodegradation of plastics in soil: The effect of temperature. Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2019.109017
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.