The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Thermal degradation of poly(l-lactide): effect of alkali earth metal oxides for selective l,l-lactide formation
Open accessAbstract
Abstract To achieve the feed stock recycling of poly( l -lactide) (PLLA) to l , l -lactide, PLLA composites including alkali earth metal oxides, such as calcium oxide (CaO) and magnesium oxide (MgO), were prepared and the effect of such metal oxides on the thermal degradation was investigated from the viewpoint of selective l , l -lactide formation. Metal oxides both lowered the degradation temperature range of PLLA and completely suppressed the production of oligomers other than lactides. CaO markedly lowered the degradation temperature, but caused some racemization of lactide, especially in a temperature range lower than 250 °C. Interestingly, with MgO racemization was avoided even in the lower temperature range. It is considered that the effect of MgO on the racemization is due to the lower basicity of Mg compared to Ca. At temperatures lower than 270 °C, the pyrolysis of PLLA/MgO (5 wt%) composite occurred smoothly causing unzipping depolymerization, resulting in selective l , l -lactide production. A degradation mechanism was discussed based on the results of kinetic analysis. A practical approach for the selective production of l , l -lactide from PLLA is proposed by using the PLLA/MgO composite.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
McNeill, I. C., & Leiper, H. A. (1985) · Polymer Degradation and Stability · doi:10.1016/0141-3910(85)90035-7 · Cited by 404
Radano, C. P., Baker, G. L., & Smith, M. R. (2000) · Journal of the American Chemical Society · doi:10.1021/ja9930519 · Cited by 403
Ajioka, M., Enomoto, K., Suzuki, K., & Yamaguchi, A. (1995) · Journal of Environmental Polymer Degradation · doi:10.1007/bf02068677 · Cited by 322
Effect of tin on poly(l-lactic acid) pyrolysis
Nishida, H., Mori, T., Hoshihara, S., Fan, Y., Shirai, Y., & Endo, T. (2003) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(03)00152-6 · Cited by 176
Self-citationNODA, M., & OKUYAMA, H. (1999) · Chemical and Pharmaceutical Bulletin · doi:10.1248/cpb.47.467 · Cited by 121
Cited by
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Catalysis as an Enabling Science for Sustainable Polymers
Zhang, X., Fevre, M., Jones, G. O., & Waymouth, R. M. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00329 · Cited by 936
Chemically recyclable polymers: a circular economy approach to sustainability
Hong, M., & Chen, E. Y.-X. (2017) · Green Chemistry · doi:10.1039/c7gc01496a · Cited by 876
Recycling of bioplastics, their blends and biocomposites: A review
Soroudi, A., & Jakubowicz, I. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.07.025 · Cited by 432
Payne, J., & Jones, M. D. (2021) · ChemSusChem · doi:10.1002/cssc.202100400 · Cited by 426
Toward Infinitely Recyclable Plastics Derived from Renewable Cyclic Esters
Tang, X., & Chen, E. Y.-X. (2019) · Chem · doi:10.1016/j.chempr.2018.10.011 · Cited by 389
The Chemical Recycling of PLA: A Review
McKeown, P., & Jones, M. D. (2020) · Sustainable Chemistry · doi:10.3390/suschem1010001 · Cited by 294
Murariu, M., Doumbia, A., Bonnaud, L., Dechief, A., Paint, Y., Ferreira, M., Campagne, C., Devaux, E., & Dubois, P. (2011) · Biomacromolecules · doi:10.1021/bm2001445 · Cited by 286
Solvothermal Alcoholysis Routes for Recycling Polylactide Waste as Lactic Acid Esters
Petrus, R., Bykowski, D., & Sobota, P. (2016) · ACS Catalysis · doi:10.1021/acscatal.6b01009 · Cited by 181
Transforming polylactide into value‐added materials
Leibfarth, F. A., Moreno, N., Hawker, A. P., & Shand, J. D. (2012) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.26303 · Cited by 139
Development of materials and technologies for control of polymer recycling
Nishida, H. (2011) · Polymer Journal · doi:10.1038/pj.2011.16 · Cited by 94
Self-citationKim, K. J., Doi, Y., & Abe, H. (2006) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2005.06.004 · Cited by 88
Ariffin, H., Nishida, H., Shirai, Y., & Hassan, M. A. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2010.01.018 · Cited by 85
“Fax: +603- 89467510 Running title Selective transformation of PHB into trans-crotonic acid © 2010This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/ Abstract Completely selective transformation of poly[(R)-3-hydroxybutyric acid] (PHB) into trans…”
MethodInfluentialSelf-citationChen, J., Liu, Z., Qiu, S., Li, Y., Sun, J., Li, H., Gu, X., & Zhang, S. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2023.145000 · Cited by 69
Biodegradable Polyesters from Renewable Resources
Tsui, A., Wright, Z. C., & Frank, C. W. (2013) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061312-103323 · Cited by 68
Chemical recycling of poly(lactic acid) via controlled degradation with protic (macro)molecules
Plichta, A., Lisowska, P., Kundys, A., Zychewicz, A., Dębowski, M., & Florjańczyk, Z. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.006 · Cited by 53
Metadata
- Authors
- Fan, Y., Nishida, H., Mori, T., Shirai, Y., & Endo, T.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2004-02
- Volume
- 45
- Issue
- 4
- Pages
- 1197-1205
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2075206554
- Cited by
- 171
- References
- 8
- FWCI
- 3.07
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.