The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Toughening mechanisms of nanoparticle-modified epoxy polymers
Abstract
An epoxy resin, cured with an anhydride, has been modified by the addition of silica nanoparticles. The particles were introduced via a sole gel technique which gave a very well-dispersed phase of nanosilica particles which were about 20 nm in diameter. Atomic force and electron microscopies showed that the nanoparticles were well-dispersed throughout the epoxy matrix. The glass transition temperature was unchanged by the addition of the nanoparticles, but both the modulus and toughness were increased. The measured modulus was compared to theoretical models, and good agreement was found. The fracture energy increased from 100 J/m 2 for the unmodified epoxy polymer to 460 J/m 2 for the epoxy polymer with 13 vol% of nanosilica. The fracture surfaces were inspected using scanning electron and atomic force microscopies, and the results were compared to various toughening mechanisms proposed in the literature. The toughening mechanisms of crack pinning, crack deflection and immobilised polymer were discounted. The microscopy showed evidence of debonding of the nanoparticles and subsequent plastic void growth. A theoretical model of plastic void growth was used to confirm that this mechanism was indeed most likely to be responsible for the increased toughness that was observed due to the presence of the nanoparticles. 2006 Elsevier Ltd. All rights reserved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Mechanical Properties of Polymers and Composites
Landel, R. F., & Nielsen, L. E. (1993) · CRC Press eBooks · doi:10.1201/b16929 · Cited by 3,666
The Elastic and Thermo-elastic Properties of Composite Media
Kerner, E. H. (1956) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/69/8/305 · Cited by 1,786
Crack deflection processes—I. Theory
Faber, K. T., & Evans, A. G. (1983) · Acta Metallurgica · doi:10.1016/0001-6160(83)90046-9 · Cited by 1,444
Dynamic mechanical properties of particulate‐filled composites
Lewis, T. B., & Nielsen, L. E. (1970) · Journal of Applied Polymer Science · doi:10.1002/app.1970.070140604 · Cited by 1,030
Modeling properties of nylon 6/clay nanocomposites using composite theories
Fornes, T. D., & Paul, D. R. (2003) · Polymer · doi:10.1016/s0032-3861(03)00471-3 · Cited by 990
Adhesion and Adhesives: Science and Technology
Kinloch, A. J. (2012) · CERN Document Server (European Organization for Nuclear Research) · Cited by 951
Self-citationStiffness and Expansion Estimates for Oriented Short Fiber Composites
Halpin, J. C. (1969) · Journal of Composite Materials · doi:10.1177/002199836900300419 · Cited by 927
Kinloch, A. J., Shaw, S. J., Tod, D. A., & Hunston, D. L. (1983) · Polymer · doi:10.1016/0032-3861(83)90070-8 · Cited by 787
Self-citationA review of particulate reinforcement theories for polymer composites
Ahmed, S., & Jones, F. R. (1990) · Journal of Materials Science · doi:10.1007/bf00580110 · Cited by 781
Fracture Behaviour of Polymers
(1995) · doi:10.1007/978-94-017-1594-2 · Cited by 757
Effect of rubber particle size on deformation mechanisms in glassy epoxy
Sultan, J. N., & McGarry, F. J. (1973) · Polymer Engineering & Science · doi:10.1002/pen.760130105 · Cited by 644
Particulate-filled polymer composites
(1996) · Polymer Testing · doi:10.1016/0142-9418(96)00004-9 · Cited by 622
Modeling of the mechanical properties of nanoparticle/polymer composites
Odegard, G. M., Clancy, T. C., & Gates, T. S. (2004) · Polymer · doi:10.1016/j.polymer.2004.11.022 · Cited by 616
Characterization and modeling of mechanical behavior of polymer/clay nanocomposites
Luo, J. (2003) · Composites Science and Technology · doi:10.1016/s0266-3538(03)00060-5 · Cited by 601
Toughening mechanisms in elastomer-modified epoxies: Part 2 Microscopy studies
Pearson, R. A., & Yee, A. F. (1986) · Journal of Materials Science · doi:10.1007/bf01114294 · Cited by 594
Fracture behaviour of polymers
(1984) · doi:10.1016/0143-7496(84)90108-8 · Cited by 580
The interaction of a crack front with a second-phase dispersion
Lange, F. F. (1970) · Philosophical Magazine · doi:10.1080/14786437008221068 · Cited by 538
The strength of brittle materials containing second phase dispersions
Evans, A. G. (1972) · Philosophical magazine · doi:10.1080/14786437208220346 · Cited by 305
Fracture energy of an epoxy composite system
Lange, F. F., & Radford, K. C. (1971) · Journal of Materials Science · doi:10.1007/bf00550091 · Cited by 282
The Laminate Approximation for Randomly Oriented Fibrous Composites
Halpin, J. C., & Pagano, N. J. (1969) · Journal of Composite Materials · doi:10.1177/002199836900300416 · Cited by 274
Toughness of syndiotactic polystyrene/epoxy polymer blends: microstructure and toughening mechanisms
Johnsen, B. B., Kinloch, A. J., & Taylor, A. C. (2005) · Polymer · doi:10.1016/j.polymer.2005.05.151 · Cited by 126
Self-citationMcGee, S. H., & McGullough, R. L. (1981) · Polymer Composites · doi:10.1002/pc.750020403 · Cited by 110
Interfacial interactions and the properties of filled polymers: I. Dynamic‐mechanical responses
Bölük, M. Y., & Schreiber, H. P. (1986) · Polymer Composites · doi:10.1002/pc.750070506 · Cited by 98
Micromechanical deformations in particulate filled thermoplastics: volume strain measurements
Pukánszky, B., van Es, M. A., Maurer, F. H. J., et al. (1994) · Journal of Materials Science · doi:10.1007/bf00363426 · Cited by 93
Experimental determination of thermal and adhesion stress in particle filled thermoplasts
Vollenberg, P., Heikens, D., & Ladan, H. (1988) · Polymer Composites · doi:10.1002/pc.750090603 · Cited by 62
Cited by
Cellulose nanomaterials review: structure, properties and nanocomposites
Moon, R. J., Martini, A., Nairn, J., Simonsen, J., & Youngblood, J. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00108b · Cited by 6,756
Fu, S.-Y., Feng, X.-Q., Lauke, B., & Mai, Y.-W. (2008) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2008.01.002 · Cited by 3,549
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G. H., & Vahid, S. (2015) · Nanoscale · doi:10.1039/c5nr01354b · Cited by 808
Mechanical properties of epoxy composites filled with silane-functionalized graphene oxide
Wan, Y.-J., Gong, L.-X., Tang, L.-C., Wu, L.-B., & Jiang, J.-X. (2014) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2014.04.023 · Cited by 635
Metadata
- Authors
- Johnsen, B. B., Kinloch, A. J., Mohammed, R. D., Taylor, A. C., & Sprenger, S.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2007-01
- Volume
- 48
- Issue
- 2
- Pages
- 530-541
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2054471026
- Cited by
- 942
- References
- 25
- FWCI
- 58.57
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.