The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles
Open accessAbstract
An epoxy resin, cured using an anhydride hardener, has been modified by the addition of pre-formed polysiloxane core-shell rubber (S-CSR) particles with a mean diameter of 0.18 μm. The glass transition temperature, Tg, of the cured unmodified epoxy polymer was 148 °C, and this was unchanged after the addition of the S-CSR particles. The polysiloxane rubber particles had a Tg of about −100 °C. Atomic force microscopy showed that the S-CSR particles were well-dispersed in the epoxy polymer. The addition of the S-CSR particles reduced the Young's modulus and tensile strength of the epoxy polymer, but at 20 °C the fracture energy, GIc, increased from 117 J/m2 for the unmodified epoxy to 947 J/m2 when 20 wt% of the S-CSR particles were incorporated. Fracture tests were also performed at −55 °C, −80 °C, and −109 °C. The results showed that the measured fracture energy of the S-CSR-modified epoxy polymers decreased significantly below room temperature. For example, at −109 °C, a fracture energy of 481 J/m2 was measured using 20 wt% of S-CSR particles. Nevertheless, this value of toughness still represented a major increase compared with the unmodified epoxy polymer, which possessed a value of GIc of 174 J/m2 at this very low test temperature. Thus, a clear fact that emerged was that the addition to the epoxy polymer of the S-CSR particles may indeed lead to significant toughening of the epoxy, even at temperatures as low as about −100 °C. The toughening mechanisms induced by the S-CSR particles were identified as (a) localised plastic shear-band yielding around the particles and (b) cavitation of the particles followed by plastic void growth of the epoxy polymer. These mechanisms were modelled using the Hsieh et al. approach [33], [49] and the values of GIc of the S-CSR-modified epoxy polymers at the different test temperatures were calculated. Excellent agreement was found between the predictions and the experimentally measured fracture energies. Further, the experimental and modelling results of the present study indicated that the extent of plastic void growth was suppressed at low temperatures for the S-CSR-modified epoxy polymers, but that the localised shear-band yielding mechanism was relatively insensitive to the test temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A theory for the low-temperature plastic deformation of glassy polymers
Argon, A. S. (1973) · Philosophical Magazine · doi:10.1080/14786437308220987 · Cited by 801
Cited by
Domun, N., Hadavinia, H., Zhang, T., Sainsbury, T., Liaghat, G. H., & Vahid, S. (2015) · Nanoscale · doi:10.1039/c5nr01354b · Cited by 808
Toughness and its mechanisms in epoxy resins
Mi, X., Liang, N., Xu, H., Wu, J., Jiang, Y., Nie, B., & Zhang, D. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.100977 · Cited by 683
Metadata
- Authors
- Chen, J., Kinloch, A. J., Sprenger, S., & Taylor, A. C.
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2013-07
- Volume
- 54
- Issue
- 16
- Pages
- 4276-4289
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2030930631
- Cited by
- 243
- References
- 1
- FWCI
- 27.01
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles. https://app.cochat.ai/papers/10.1016/j.polymer.2013.06.009
- The paper
- Chen, J., Kinloch, A. J., Sprenger, S., & Taylor, A. C. (2013). The mechanical properties and toughening mechanisms of an epoxy polymer modified with polysiloxane-based core-shell particles. Polymer. https://doi.org/10.1016/j.polymer.2013.06.009
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.