Toughening of poly(l-lactide) with poly(ε-caprolactone): Combined effects of matrix crystallization and impact modifier particle size
Integrity signals
Registry
Cites
Statistics
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
At 80 °C, the modulus of PLA/PCL (80/20) blends with a high-crystallinity PLA matrix was 20 times higher than the modulus of an analogous blend with a low-crystallinity PLA matrix.
“Bai et al. (2013) found that the modulus of PLA/PCL (80/20) blends with a high-crystallinity PLA matrix was 20 times higher than the modulus of an analogous blend with a low-crystallinity of PLA matrix at the temperature of 80 • C.”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Bai et al., 2013
For PLA/PCL (80/20) blends with high PLA crystallinity (46-48%), the maximum notched Izod impact strength was found for weight-average PCL droplet diameter between 0.3 and 0.5 μm.
“For the blends with the high PLA crystallinity (46-48%), the maximum of the impact strength was found for d w between 0.3 and 0.5 µm.”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Bai et al., 2013
The crystallinity of PLA in its blends processed by common procedures tends to be very low, typically lower than 10%.
“Consequently, the crystallinity of PLA in its blends processed by common procedures tends to be very low, typically lower than 10% (Bai et al., 2012(Bai et al., , 2013;;Ostafinska et al., 2015Ostafinska et al., , 2017)).”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Bai et al., 2013
For PLA/PCL (80/20) blends with low PLA crystallinity (6.5-9.5%), the maximum notched Izod impact strength was achieved for weight-average PCL droplet diameter between 0.7 and 1.1 μm.
“For the blends with the low PLA crystallinity (6.5-9.5%), the maximum impact strength was achieved for d w between 0.7 and 1.1 µm.”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Bai et al., 2013
The maximum impact strength achieved for the blends with high PLA crystallinity was almost two times higher than that of the blends with low PLA crystallinity.
“It should be mentioned that the maximum value of the impact strength achieved for the blends with the high PLA crystallinity was almost two times higher than that of the blends with a low PLA crystallinity.”
From Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review (2019) · cites this paper as Bai et al., 2013
The citation lists haven’t been fetched yet
References 51 · Cited by 153
- Authors
- Bai, H., Huang, C., Xiu, H., Gao, Y., Zhang, Q., & Fu, Q.
- Affiliations
- Sichuan University (CN)
- Corresponding author
- Fu, Qiang
- Venue
- Polymer
- Publisher
- Elsevier BV
- Published
- 2013-08
- Volume
- 54
- Issue
- 19
- Pages
- 5257-5266
- ISSN
- 0032-3861 (ISSN-L)
- OpenAlex
- W2046055005
- Cited by
- 153
- References
- 51
- Citations by year
- 2026: 6 · 2025: 5 · 2024: 17 · 2023: 18 · 2022: 17 · 2021: 12 · 2020: 16 · 2019: 9 · 2018: 12 · 2017: 15 · 2016: 7 · 2015: 14 · 2014: 5
- FWCI
- 6.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Polymer (publishedVersion)
- Funders
- National Natural Science Foundation of China (50903048, 51121001)
- China Postdoctoral Science Foundation (2013M530399)
- Topics
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Foaming and Composites
- Keywords
- poly(L-lactic acid), polycaprolactone, impact toughening, polymer blends, matrix crystallization, nucleating agents, shear yielding, crazing, heat resistance, biodegradable polymers
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
