A revisit of pressure drop-flow rate correlations for packed beds of spheres

Perry's chemical engineers' handbook

(2008) · Choice Reviews Online · doi:10.5860/choice.45-4393 · Cited by 10,121

Fluid Flow Through Packed Columns

Ergün, Ş. (1952) · Medical Entomology and Zoology · Cited by 6,992

Perry's chemical engineers' handbook

(1998) · Choice Reviews Online · doi:10.5860/choice.35-3079 · Cited by 5,919

Fluid flow through granular beds

Carman, P. C. (1997) · Chemical Engineering Research and Design · doi:10.1016/s0263-8762(97)80003-2 · Cited by 3,300

Proceedings of the Institution of Mechanical Engineers

(1987) · Computer-Aided Design · doi:10.1016/0010-4485(87)90099-6 · Cited by 1,329

Flow through Porous Media-the Ergun Equation Revisited

Macdonald, I. F., El-Sayed, M. S., Mow, K., & Dullien, F. A. L. (1979) · Industrial & Engineering Chemistry Fundamentals · doi:10.1021/i160071a001 · Cited by 1,078

The influence of confining walls on the pressure drop in packed beds

Eisfeld, B., & Schnitzlein, K. (2001) · Chemical Engineering Science · doi:10.1016/s0009-2509(00)00533-9 · Cited by 384

Generalized friction factor and drag coefficient correlations for fluid-particle interactions

Gibilaro, L. G., Felice, R. D., Waldram, S. P., & Foscolo, P. U. (1985) · Chemical Engineering Science · doi:10.1016/0009-2509(85)80116-0 · Cited by 325

Resistance to the Flow of Fluids Through Simple and Complex Porous Media Whose Matrices Are Composed of Randomly Packed Spheres

Fand, R. M., Kim, B. Y. K., Lam, A. C. C., & Phan, R. T. (1987) · Journal of Fluids Engineering · doi:10.1115/1.3242658 · Cited by 296

Rate of sedimentation.Nonflocculated Suspensions of Uniform Spheres

Steinour, H. H. (1944) · Industrial & Engineering Chemistry · doi:10.1021/ie50415a005 · Cited by 264

ACHEM148691: Continuous-flow column evaluation of a novel clay–biomass composite filter media (KJ25 EcoPellets) for iron and manganese removal from decentralised drinking-water systems

Balasooriya, B. M. J. K., Rajapakse, J., Gallage, C. P. K., & Jayatilake, I. N. (2026) · Chemosphere · doi:10.1016/j.chemosphere.2026.144937 · Cited by 4

Revisiting the Influence of Confinement on the Pressure Drop in Fixed Beds

Falkinhoff, F., Pierson, J.-L., Gamet, L., Bourgoin, M., & Volk, R. (2023) · Transport in Porous Media · doi:10.1007/s11242-023-02009-0 · Cited by 4

Application of Deep Neural Network Technology for Multi‐scale CFD Modeling in Porous Media

Li, J., Liu, T., Jia, S., Xu, C., Fan, T., & Huai, Y. (2024) · Chemical Engineering & Technology · doi:10.1002/ceat.202200564 · Cited by 4

Local-scale variability in packed beds of polyhedral particles: Structural and thermal distribution

Rodrigues, S. J., Kazemi, N., & Tsotsas, E. (2024) · Powder Technology · doi:10.1016/j.powtec.2024.120461 · Cited by 4

Novel Pressure Drop Model for Packed Bed Contacting Devices

Najafabadi, M. A. G., & Dehkordi, A. M. (2025) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5c02425 · Cited by 3

Low Reynolds Number Flow in a Packed Bed of Rotated Bars

Sadowski, W., Velten, C., Brömmer, M., Demir, H., Hülz, K., di Mare, F., Zähringer, K., & Scherer, V. (2026) · Chemical Engineering & Technology · doi:10.1002/ceat.70244 · Cited by 3

Hydrodynamics Investigation of Electrodeionization Resin Bed for Improved Ultrapure Water Production

Indurkar, P. D., Dixit, P., Markam, B. K., Maldhure, A. V., & Kulshrestha, V. (2026) · Water Conservation Science and Engineering · doi:10.1007/s41101-026-00480-6 · Cited by 3

Experimental Validation of the X-ray Determined Pore Size Distribution of Porous Hybrid Motor Grains

Buckley, J. R., & Nelson, G. J. (2019) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2019-4097 · Cited by 3

Hydraulic performance analysis of new versus commercial nozzle design for pressurised porous media filters

Graciano-Uribe, J. A., Pujol, T., Duran–Ros, M., Arbat, G., de Cartagena, F. R., & Puig–Bargués, J. (2024) · Irrigation Science · doi:10.1007/s00271-024-00985-9 · Cited by 3

Experimental research of pressure drop in packed beds of monosized spheres a novel correlation for pressure drop calculation

Stamenić, M. S. (2016) · Thermal Science · doi:10.2298/tsci161025327s · Cited by 3

Use of an Artificial Neural Network in determination of iron ore pellet bed permeability

Chagas, M., Machado, M. L. P., Souza, J. B. C., & Frigini, E. F. D. J. (2017) · REM - International Engineering Journal · doi:10.1590/0370-44672016700032 · Cited by 3

Evolution Process of Natural Gas Hydrate Deposits in Water-Dominated Systems

Liu, X., Song, K., Li, Y., Yao, H., Chen, H., Li, Z., & Wang, W. (2022) · Energy & Fuels · doi:10.1021/acs.energyfuels.2c01505 · Cited by 3

A DEM-CFD Approach for Predicting Pressure Drop Through Packed Bed of Crushed Rocks

Hassan, E. B. E., & Hoffmann, J. E. (2024) · SolarPACES Conference Proceedings · doi:10.52825/solarpaces.v1i.665 · Cited by 3

Experimental Study on Hydraulic Conductivity and Resistance in Silty Sediments

Zhu, W., Zhang, M., Sun, H., & Yu, G. (2020) · Water · doi:10.3390/w13010075 · Cited by 3

Sublimation front and sinter layer formation on cometary surfaces: modelling the desiccation process from mixtures of ice and refractory materials

Zivithal, S., Macher, W., Kargl, G., & Lammer, H. (2025) · Monthly Notices of the Royal Astronomical Society · doi:10.1093/mnras/staf1091 · Cited by 2

Assessment of averaged 1D models for column adsorption with 3D computational experiments

Aguareles, M., & Font, F. (2025) · Physica D Nonlinear Phenomena · doi:10.1016/j.physd.2025.135064 · Cited by 2

Nusselt number correlation for convective heat transfer in dual core-ring packed beds

Díaz-Ulloa, P., Garrido-Figueroa, B., Guerrero, S., & Cornejo, I. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.123067 · Cited by 2

Physics-Based Interpretation of RFS-DSS for Far-Field Monitoring of Fracture Conductivity

Nwabueze, Q. A., & Leggett, S. E. (2026) · SPE Hydraulic Fracturing Technology Conference and Exhibition · doi:10.2118/230629-ms · Cited by 2

Uniform flow in axisymmetric devices through permeability optimization

Antil, H., Kouri, D., Ridzal, D., Robinson, D., & Salloum, M. (2023) · Optimization and Engineering · doi:10.1007/s11081-023-09820-0 · Cited by 2

CHARACTERISTICS OF FLOW REGIMES IN SPIRAL PACKED BEDS WITH SPHERES

Gökaslan, M. Y., Ozdemir, M., & Kuddusi, L. (2024) · Journal of Porous Media · doi:10.1615/jpormedia.2024049270 · Cited by 2

Performance analysis of solar thermal storage systems with packed bed utilizing form-stable phase change materials and heat pump integration

Wang, C., Gao, Y., Yang, J., Liu, B., Dai, Z., Wu, D., Xia, Y., Yu, J., Yan, W., & Zhang, X. (2024) · Journal of Renewable and Sustainable Energy · doi:10.1063/5.0206364 · Cited by 2

Advanced 1D model of deep filtration in a porous wall with complex morphology

Němec, J., Plachá, M., & Kočí, P. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.159879 · Cited by 2

Momentum-heat-mass transfer analogy in gas-solid packed bed at elevated temperatures

Pešić, R., Boskovic‐Vragolovic, N. M., Arsenijević, Z., Tadić, G., & Radoičić, T. K. (2022) · JOURNAL OF ENGINEERING & PROCESSING MANAGEMENT · doi:10.7251/jepm2201001p · Cited by 2

Developing a phenomenological model to simulate single and mixed scale formation during flow in porous media: Coupling a salt precipitation model with an ion transport equation under dynamic conditions

Hosseini, E., Nazar, D. M., Hosseini, N., & Sarmadivaleh, M. (2023) · Petroleum Research · doi:10.1016/j.ptlrs.2023.09.003 · Cited by 2

Enhancing packed bed geometry using computational fluid dynamic simulations

Houlton, B. (2019) · UC Research Repository (University of Canterbury) · doi:10.26021/3418 · Cited by 2

PRESSURE DROP PREDICTION WITH AN ANALYTICAL STRUCTURE-PROPERTY MODEL FOR FLUID THROUGH POROUS MEDIA

Li, G., Huang, Y., Han, W., Wu, Z., & YANG, Y. (2021) · Fractals · doi:10.1142/s0218348x2150184x · Cited by 1

Modelling of a Cartridge-based Fixed Bed Radial Flow Reactor for Methanol Synthesis

Sauerhöfer-Rodrigo, F., Rodríguez, M., & Díaz, I. (2024) · Computer-aided chemical engineering/Computer aided chemical engineering · doi:10.1016/b978-0-443-28824-1.50057-0 · Cited by 1

Physical Parameters of Arterial Thrombus as a Porous Medium

Bershadsky, E. S., & Nechipurenko, D. Y. (2024) · BIOPHYSICS · doi:10.1134/s0006350924700155 · Cited by 1

Thermal design of the reformer in reformer-fuel cell systems for onboard hydrogen production in LNG-fueled ships

Hwang, D.-H., Choi, Y., & Lim, T.-W. (2026) · Thermal Science and Engineering Progress · doi:10.1016/j.tsep.2026.104484 · Cited by 1

A Generalized Framework for Flow Resistance in Canopies and Granular Beds

Tsai, B., & Lee, C. (2026) · Water Resources Research · doi:10.1029/2025wr041950 · Cited by 1

Thermal Analysis of Phase Change Material Based Energy Storage Module With Triply Periodic Minimal Surfaces

Su, T., Xue, G., Javadirad, S., Kundu, A., & Öztekin, A. (2026) · Energy Storage · doi:10.1002/est2.70417 · Cited by 1

Multiple regression modelling of bed expansion and backwashing pressure drop in pressurised porous media filters for microirrigation and comparison with semi-analytical models

Graciano-Uribe, J. A., Pujol, T., Castells, A., Duran–Ros, M., Arbat, G., Cartagena, F. R., & Puig–Bargués, J. (2026) · Irrigation Science · doi:10.1007/s00271-026-01125-1 · Cited by 1

Impact of inlet velocity on non-Darcian-Forchheimer oil flow in porous media: A numerical approach

Al-Gaheeshi, A. M. R., Rashid, F. L., Mohammed, H. I., Homod, R. Z., & Togun, H. (2026) · Petroleum · doi:10.1016/j.petlm.2026.06.001 · Cited by 1

Mitigating flow maldistribution in random packed beds of spheres via wall corrugation

Niegodajew, P., Wilczyński, M., Durajski, A. P., & Marek, M. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2026.07.027 · Cited by 1

Counterflow combustion waves in short samples of metal powders at natural filtration of oxygen

BAYLISS, A., Shafirovich, E., & Volpert, V. A. (2022) · Combustion Theory and Modelling · doi:10.1080/13647830.2022.2066024 · Cited by 1

Quinn’s Law of Fluid Dynamics Pressure-Driven Fluid Flow through Closed ConduitsPreprint

Quinn, H. M. (2019) · Preprints.org · doi:10.20944/preprints201910.0208.v1 · Cited by 1

Validation expérimentale d'un système de stockage thermocline air/céramique à échelle pilote - développement d'un matériau céramique issu de sous-produits industriels

Ferber, N. L. (2018) · theses.fr (ABES) · doi:10.70675/e998bab5z38a3z41b3z9d86z4e9c7f7f24df · Cited by 1

Topology optimisation of adsorption beds for cost-effective direct air capture

Mallon, C., Thornton, A., Hill, M., Badia, S., & Grutering, N. (2026) · arXiv · doi:10.48550/arxiv.2609.14214

Pressure drop in one stage and two-stages of packed columns

Troudi, H., Ghiss, M., Ellejmi, M., Tourki, Z., & Ellejmi, M. (2018) · International Renewable Energy Congress · doi:10.1109/irec.2018.8362495

Numerical Study of Influence of Fluid Distribution over Heat Storage into Porous Media

Bellenot, G., Bentivoglio, F., & Marty, P. (2019) · Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering · doi:10.11159/htff19.186

Oxidizer Pressure Drop Analysis of Porous Hybrid Motor Grains

Buckley, J. R., Venters, J. P., & Nelson, G. J. (2020) · AIAA Propulsion and Energy Forum · doi:10.2514/6.2020-3970

An experimental ınvestigation of wall effects in liquid-solid fluidization

Kaplan, Ö. (2017) · Dspace Repository (Marmara Üniversitesi)

Direct Methanol Fuel Cell-based power plant for Autonomous Underwater Vehicles. Endurance increase and Carbon Dioxide management in a confined Environment

Villalba-Herreros, A. (2021) · UPM Digital Archive (Technical University of Madrid) · doi:10.20868/upm.thesis.69261

Semi-analytical approach to the determination of fracture permeability

Pusztai, P., Koroncz, P. J., Kuncz, M., Jobbik, A., & Fedor, F. (2023) · GEM - International Journal on Geomathematics · doi:10.1007/s13137-023-00227-8

Physical Parameters of Arterial Thrombus as a Porous Medium

Bershadsky, E. S., & Nechipurenko, D. Y. (2024) · Биофизика · doi:10.31857/s0006302924010157

Combined computational-experimental study on plasma and plasma catalysis for N2 fixation

Eshtehardi, H. A. (2024) · doi:10.63028/10067/2052460151162165141

Fluid Flow and Heat Transfer Characteristics in Empty, Finned, and Packed Bed Rectangular Duct

Jagtap, S. D., & Mishra, M. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-97-1033-1_17

Optimum design and operation of an internally-heated packed-bed tank for high-temperature solid–air energy storage: Practical application from theoretically-derived relations

Martín-Alcántara, A., & Fernández-Feria, R. (2025) · Journal of Energy Storage · doi:10.1016/j.est.2025.117844

The development of a model with a macro characteristic element for predicting pressure drop across the particle bed

Deng, Y., Zhou, S., Xu, J., Li, R., & Wu, Y. (2025) · Chemical Engineering Science · doi:10.1016/j.ces.2025.122584

Numerische Simulation von Wärmetransportphänomenen bei ausgewählten industriellen Prozessen

Pichler, M. (2022) · reposiTUm (TU Wien) · doi:10.34726/hss.2022.91402

Geavanceerde Computational Fluid Dynamics modellen voor een meer duurzame en energie-efficiënte koudeketen van hard fruit na de oogst

Gruyters, W. (2019) · Lirias

Filtration of Emulsions: The Population Balance Modeling

Papine-Paktoris, S., Trancoso, J., Andersen, S. I., & Shapiro, A. A. (2026) · Liquids · doi:10.3390/liquids6010004

Numerical analysis of flow within a packed bed using computational fluid dynamics: Effects of fluid nature and regime

Ladeg, S., & Moulaï-Mostefa, N. (2026) · Hemijska industrija · doi:10.2298/hemind250316001l

Etude de l'influence de la distribution de fluide sur le comportement thermohydraulique d'un réservoir de stockage thermique mono-cuve dual-media

Bellenot, G. (2020) · theses.fr (ABES) · doi:10.70675/34fb4a4fzd111z43c9z8b92z81b87334dd58

Inertial flows in wall-bounded porous media : from pore- to global scales

Falkinhoff, F. (2023) · theses.fr (ABES) · doi:10.70675/fb3c058az2adfz4cf0zbf9ez654cca94038a

Experimental Evaluation of Commercial Molecular Sieves 13X, 4A, and JLPM3 for Sustainable Direct Air CO2 Capture from Humid Air via Temperature-Swing Adsorption: “Sieve the Atmosphere”

Signorelli, L., Esparza, P., Chinea, E., & Esparza, P. (2026) · Sustainability · doi:10.3390/su18073601

Éco-conception d'un échangeur-stockeur thermique de type thermocline

Roux, D. L. (2022) · theses.fr (ABES) · doi:10.70675/50868e78z4145z4e8fza786z23edbff2ffc5

Experimental and numerical investigation of the multifaceted influence of tank slenderness on packed-bed thermal energy storage performance

Ochmann, J., Rusin, K., & Bartela, Ł. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.130946

Internal streamlines in oscillatory heap formation on a submerged particle bed

Ragione, L. L., Larcher, M., Jenkins, J. T., & Prati, A. (2026) · Physical Review Fluids · doi:10.1103/wxb4-vxsl

Predicting packing density in packed bed reactors using convolutional neural networks trained on discrete element method simulations: Effects of pellet shape, material, and filling conditions

Bauer, C., von Seckendorff, J., Fischer, R. W., Szesni, N., & Hinrichsen, O. (2026) · Chemical Engineering Journal Advances · doi:10.1016/j.ceja.2026.101210

PREDICTION OF PRESSURE DROP IN A COMPRESSED PACKED BED BY CONSIDERING COMPRESSION RATE

Wu, D., Wu, D., & Zhou, P. (2026) · Journal of Porous Media · doi:10.1615/jpormedia.2026061837

Driver–system coupling in packed bed aerodynamics: How flow driver characteristics affect packed bed experimental data

Nikitin, M., & Pashchenko, D. (2026) · Process Safety and Environmental Protection · doi:10.1016/j.cherd.2026.06.012

Numerical simulation of in-fracture plugging behavior of temporary plugging agents in diverting fracturing of deep shale gas reservoirs

Zhao, J., Ren, Q., Ren, L., Lin, R., Yu, Z., Wu, J., Song, Y. F., & Shen, C. (2026) · Petroleum Science and Technology · doi:10.1080/10916466.2026.2685143

Experimental study on frictional pressure drop characteristics of air flow through vertical packed beds of irregular DRI under single-size and size-graded conditions

Li, C., Dong, H., Zhao, L., Zhang, Q. Y., & Shi, J. (2026) · Powder Technology · doi:10.1016/j.powtec.2026.122832

Coupling of droplet size and pressure drop in liquid–liquid packed-bed microreactors across a wide range of tube/particle diameter ratios

Xu, Y., Chen, R., Zhao, S., & Chen, G. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.178779

Sustainable Drinking Water Treatment for Remote Communities Using Appropriate Technologies with Special Emphasis on Australia

Mudiyanselage, J. B. (2026) · Queensland University of Technology · doi:10.5204/thesis.eprints.266988

Clogging evolution and pressure-drop prediction in lead–bismuth eutectic filtration: A coupled MPM–DEM study

Pang, X., Lu, D., Chen, F., Wang, C., & Tian, W. (2026) · International Communications in Heat and Mass Transfer · doi:10.1016/j.icheatmasstransfer.2026.112348

Desarrollo y aplicación de materiales basados en hierro cero valente (ZVI) para el tratamiento de contaminantes orgánicos en aguas

Ocampo, S. (2026) · El Servicio de Difusión de la Creación Intelectual (National University of La Plata) · doi:10.35537/10915/198599

A novel latent heat thermal energy storage design enabling flexible operating conditions

Su, T., Javadirad, S., Kundu, A., & Öztekin, A. (2026) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2026.133217

Characterization of pressure drop in structured packed beds with a layer stacking model

Guo, Y., Li, B., Tian, K., Yan, Z., Ding, M., Guo, Z., & Sun, Z. (2026) · Annals of Nuclear Energy · doi:10.1016/j.anucene.2026.112832

Regenerable ion-exchange resin beads for continuous PFAS capture and regeneration for improved aqueous zinc batteries

Yang, Z., Wang, Y., Tan, X., Zhu, Y., Li, X., Dewapriya, P., Leung, L., Breske, S., Sworen, J. C., Brack, E. M., et al. (2026) · Chemical Engineering Journal · doi:10.1016/j.cej.2026.182372

Wall and packing shear stresses and turbulence effect with steam methane reforming

Otarod, M. (2026) · The Canadian Journal of Chemical Engineering · doi:10.1002/cjce.70585

Geometric fidelity, contact-point treatment, and thermal hydraulics in pebble-bed FHR: A review of pebble-bed modeling strategies

Jin, G., Chen, C., Li, Y., He, H., & Hou, Y. (2026) · Progress in Nuclear Energy · doi:10.1016/j.pnucene.2026.106645

Investigation of flow and thermal non-equilibrium in a radially layered composite particle packed bed: flow-thermal non-equilibrium and radial layered composite

Meng, F., Li, N., & Liang, G. (2026) · Journal of Non-Equilibrium Thermodynamics · doi:10.1515/jnet-2026-0008

Microstructure–flow characteristic relationships in packed beds of macroporous particles

二位, 正., Shirzadi, M. R., Ogi, T., Fukasawa, T., Fukui, K., & Ishigami, T. (2026) · AIChE Journal · doi:10.1002/aic.70728

Experimental research of pressure drop in packed beds of monosized spheres a novel correlation for pressure drop calculation

Stamenić, M. S. (2016) · Thermal Science · doi:10.2298/tsci161025327s · Cited by 3

General correlation for pressure drop through randomly‐packed beds of spheres with negligible wall effects

Dixon, A. G. (2023) · AIChE Journal · doi:10.1002/aic.18035 · Cited by 26

A Semi-empirical Correlation for Pressure Drop in Packed Beds of Spherical Particles

Choi, Y. S., Kim, S. J., & Kim, D. (2008) · Transport in Porous Media · doi:10.1007/s11242-008-9215-y · Cited by 50

A simplified correlation for fixed bed pressure drop

Çarpınlıoğlu, M. Ö., & Özahi, E. (2008) · Powder Technology · doi:10.1016/j.powtec.2008.01.027 · Cited by 43

Estimating pressure drop and Ergun/Forchheimer parameters of flow through packed bed of spheres with large particle diameters

Amiri, L., Ghoreishi‐Madiseh, S. A., Hassani, F. P., & SASMITO, A. P. (2019) · Powder Technology · doi:10.1016/j.powtec.2019.08.029 · Cited by 56