The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Insights into incipient soot formation by atomic force microscopy
Open accessAbstract
Combustion-generated soot particles can have significant impact on climate, environment and human health. Thus, understanding the processes governing the formation of soot particles in combustion is a topic of ongoing research. In this study, high-resolution atomic force microscopy (AFM) was used for direct imaging of the building blocks forming the particles in the early stages of soot formation. Incipient soot particles were collected right after the particle nucleation zone of a slightly sooting ethylene/air laminar premixed flame at atmospheric pressure and analyzed by AFM after a rapid sublimation procedure. Our data shed light on one of the most complex and still debated aspect on soot formation, i.e., the nucleation process. The molecular constituents of the initial particles have been individually analyzed in detail in their chemical/structural characteristics. Our data demonstrate the large complexity/variety of the aromatic compounds which are the building blocks of the initial soot particles. Nevertheless, some fundamental and specific characteristics have been clearly ascertained. These include a significant presence of penta-rings as opposed to the purely benzenoid aromatic compounds and the noticeable presence of aliphatic side-chains. In addition, there were indications for the presence of persistent π radicals. Incipient soot was also investigated by Raman spectroscopy, the results of which agreed in terms of chemical and structural composition of the particles with those obtained by AFM.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Bounding the role of black carbon in the climate system: A scientific assessment
Bond, T. C., Doherty, S. J., Fahey, D. W., Forster, P. M., Berntsen, T., DeAngelo, B. J., Flanner, M. G., Ghan, S., Kärcher, B., Koch, D., et al. (2013) · Journal of Geophysical Research: Atmospheres · doi:10.1002/jgrd.50171 · Cited by 6,385
Cited by
Michelsen, H. A., Colket, M. B., Bengtsson, P.-E., D’Anna, A., Desgroux, P., Haynes, B. S., Miller, J. H., Nathan, G. J., Pitsch, H., & Wang, H. (2020) · ACS Nano · doi:10.1021/acsnano.0c06226 · Cited by 271
Self-citationSoot inception: Carbonaceous nanoparticle formation in flames
Martin, J. W., Salamanca, M., & Kraft, M. (2022) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2021.100956 · Cited by 270
Campuzano, F., Martínez, J. D., Agudelo Santamaría, A. F., Sarathy, S. M., & Roberts, W. L. (2023) · Energy & Fuels · doi:10.1021/acs.energyfuels.3c00847 · Cited by 51
Metadata
- Authors
- Schulz, F., Commodo, M., Kaiser, K., De Falco, G., Minutolo, P., Meyer, G., D`Anna, A., & Gross, L.
- Venue
- Proceedings of the Combustion Institute
- Publisher
- Elsevier BV
- Published
- 2019
- Volume
- 37
- Issue
- 1
- Pages
- 885-892
- ISSN
- 1540-7489 (ISSN-L)
- OpenAlex
- W2810535486
- Cited by
- 183
- References
- 1
- FWCI
- 12.38
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.