The DOI matches its Crossref record; 61 of the 61 references it cites were found in a registry or an index.
Simulation in Manufacturing: Review and Challenges
Open accessAbstract
Simulation comprises an indispensable set of technological tools and methods for the successful implementation of digital manufacturing, since it allows for the experimentation and validation of product, process and system design and configuration. Especially in todays’ turbulent manufacturing environment, which is affected by megatrends such as globalisation and ever-increasing requirements for higher degree of product customisation and personalisation, the value of simulation is evident. This keynote paper investigates the major milestones in the evolution of simulation technologies and examines recent industrial and research applications and findings. Based on this review, the identification of gaps in current practices is presented, and future trends and challenges to be met on the field are outlined. The considered simulation methods and tools include CAx, Factory layout design, Material and Information flow design, Manufacturing Networks Design, Manufacturing Systems Planning and Control, Manufacturing Networks Planning and Control, Augmented and Virtual Reality in product and process design, planning and verification (ergonomics, robotics, etc.). The evolution, advances, current practices and future trends of these technologies, industrial applications and research results are discussed in the context of the contemporary manufacturing industry.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Knowledge-creating company: How Japanese companies create the dynamics of innovation
(1997) · Research Policy · doi:10.1016/s0048-7333(97)80234-x · Cited by 13,156
The knowledge-creating company: How Japanese companies create the dynamics of innovation
Nonaka, I., & Takeuchi, H. (1996) · Long Range Planning · doi:10.1016/0024-6301(96)81509-3 · Cited by 5,774
Recent advances in augmented reality
Azuma, R., Baillot, Y., Behringer, R., Feiner, S., Julier, S., & MacIntyre, B. (2001) · IEEE Computer Graphics and Applications · doi:10.1109/38.963459 · Cited by 4,148
Introduction to Simulation Using Siman
Pegden, C. D., Sadowski, R. P., & Shannon, R. E. (1990) · Medical Entomology and Zoology · Cited by 1,170
Manufacturing Systems: Theory and Practice
(2006) · Mechanical Engineering Series · doi:10.1007/0-387-28431-1 · Cited by 911
Augmented reality applications in design and manufacturing
Nee, A. Y. C., Ong, S. K., Chryssolouris, G., & Mourtzis, D. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.010 · Cited by 762
Self-citationThe history of medical simulation
Rosen, K. R. (2008) · Journal of Critical Care · doi:10.1016/j.jcrc.2007.12.004 · Cited by 600
Virtual reality applications in manufacturing process simulation
Mujber, T. S., Szecsi, T., & Hashmi, M. S. J. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.04.401 · Cited by 529
RFID-enabled real-time manufacturing execution system for mass-customization production
Zhong, R. Y., Dai, Q. Y., Qu, T., Hu, G. J., & Huang, G. Q. (2013) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2012.08.001 · Cited by 462
Fundamentals of ergonomics in theory and practice
Wilson, J. R. (2000) · Applied Ergonomics · doi:10.1016/s0003-6870(00)00034-x · Cited by 439
From Life Cycle Assessment to Sustainable Production: Status and Perspectives
Hauschild, M., Jeswiet, J., & Alting, L. (2005) · CIRP Annals · doi:10.1016/s0007-8506(07)60017-1 · Cited by 403
Computer-aided process planning – A critical review of recent developments and future trends
Xu, X. W., Wang, L., & Newman, S. T. (2010) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2010.518632 · Cited by 362
Augmented reality applications in manufacturing: a survey
Ong, S. K., Yuan, M. L., & Nee, A. Y. C. (2008) · International Journal of Production Research · doi:10.1080/00207540601064773 · Cited by 343
Learning and process improvement during production ramp-up
Terwiesch, C., & E. Bohn, R. (2001) · International Journal of Production Economics · doi:10.1016/s0925-5273(00)00045-1 · Cited by 341
“System-of-systems” approach for interdependent critical infrastructures
Eusgeld, I., Nan, C., & Dietz, S. (2011) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2010.12.010 · Cited by 339
SCADA security in the light of cyber-warfare
Nicholson, A., Webber, S., Dyer, S., Patel, T., & Janicke, H. (2012) · Computers & Security · doi:10.1016/j.cose.2012.02.009 · Cited by 334
The impact of product life cycle on supply chain strategy
Aitken, J., Childerhouse, P., & TOWILL, D. R. (2003) · International Journal of Production Economics · doi:10.1016/s0925-5273(03)00105-1 · Cited by 251
Panetto, H., Dassisti, M., & Tursi, A. (2012) · Advanced Engineering Informatics · doi:10.1016/j.aei.2011.12.002 · Cited by 242
A Key Issue in Product Life Cycle: Disassembly
Jovane, F., Alting, L., Armillotta, A., Eversheim, W., Feldmann, K., Seliger, G., & Roth, N. (1993) · CIRP Annals · doi:10.1016/s0007-8506(07)62530-x · Cited by 231
Machine availability monitoring and machining process planning towards Cloud manufacturing
Wang, L. (2013) · CIRP Journal of Manufacturing Science and Technology · doi:10.1016/j.cirpj.2013.07.001 · Cited by 208
The influence of ERP system implementation on the operational performance of an organization
Madapusi, A., & D’Souza, D. E. (2011) · International Journal of Information Management · doi:10.1016/j.ijinfomgt.2011.06.004 · Cited by 168
Performance of supply chain collaboration – A simulation study
Ramanathan, U. (2014) · Expert Systems with Applications · doi:10.1016/j.eswa.2013.07.022 · Cited by 162
Digital Factory - Simulation Enhancing the Product and Production Engineering Process
Kühn, W. (2006) · Winter Simulation Conference · doi:10.1109/wsc.2006.322972 · Cited by 160
Risk assessment in ERP projects
Aloini, D., Dulmin, R., & Mininno, V. (2012) · Information Systems · doi:10.1016/j.is.2011.10.001 · Cited by 158
Kosmadoudi, Z., Lim, T., Ritchie, J., Louchart, S., Liu, Y., & Sung, R. C. W. (2012) · Computer-Aided Design · doi:10.1016/j.cad.2012.08.001 · Cited by 155
Virtual and Augmented Reality Technologies for Product Realization
Lu, S. C.-Y., Shpitalni, M., & Gadh, R. (1999) · CIRP Annals · doi:10.1016/s0007-8506(07)63229-6 · Cited by 151
Perspectives on the Evolution of Simulation
Nance, R. E., & Sargent, R. G. (2002) · Operations Research · doi:10.1287/opre.50.1.161.17790 · Cited by 149
The role of simulation in digital manufacturing: applications and outlook
Mourtzis, D., Papakostas, N., Mavrikios, D., Makris, S., & Alexopoulos, K. (2015) · International journal of computer integrated manufacturing (Print) · doi:10.1080/0951192x.2013.800234 · Cited by 142
Self-citationInteractive robot trajectory planning and simulation using Augmented Reality
Fang, H., Ong, S. K., & Nee, A. Y. C. (2011) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2011.09.003 · Cited by 129
Explicit reference modeling methodology in parametric CAD system
Bodein, Y., Rose, B., & Caillaud, E. (2013) · Computers in Industry · doi:10.1016/j.compind.2013.08.004 · Cited by 120
Agent-based modeling and simulation of an autonomic manufacturing execution system
Rolón, M., & Martínez, E. (2011) · Computers in Industry · doi:10.1016/j.compind.2011.10.005 · Cited by 107
Augmented Reality-based factory planning - an application tailored to industrial needs
Pentenrieder, K., Bade, C., Doil, F., & Meier, P. G. (2007) · Proceedings - International Symposium on Mixed and Augmented Reality, ISMAR · doi:10.1109/ismar.2007.4538822 · Cited by 103
Modelling and assessing ERP project risks: A Petri Net approach
Aloini, D., Dulmin, R., & Mininno, V. (2012) · European Journal of Operational Research · doi:10.1016/j.ejor.2012.01.062 · Cited by 100
Bioprocesses: Modeling needs for process evaluation and sustainability assessment
Jiménez‐González, C., & Woodley, J. M. (2010) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2010.03.010 · Cited by 95
A multicriteria approach for risks assessment in ERP maintenance
Salmeron, J. L., & López, C. (2010) · Journal of Systems and Software · doi:10.1016/j.jss.2010.05.073 · Cited by 89
A history of discrete event simulation programming languages
Nance, R. E. (1993) · ACM SIGPLAN conference on History of Programming Languages · doi:10.1145/154766.155368 · Cited by 82
An intelligent search algorithm-based method to derive assembly line design alternatives
Michalos, G., Makris, S., & Mourtzis, D. (2011) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2011.627949 · Cited by 81
Self-citationPredicting real-world ergonomic measurements by simulation in a virtual environment
Hu, B., Liang Ma, A., Zhang, W., Salvendy, G., Chablat, D., & Bennis, F. (2010) · International Journal of Industrial Ergonomics · doi:10.1016/j.ergon.2010.10.001 · Cited by 81
Electrical Engineering and Computer Science
Brunet, M. (2021) · Cited by 74
The Evolution of Manufacturing Systems
Mourtzis, D., & Doukas, M. (2014) · Advances in logistics, operations, and management science book series · doi:10.4018/978-1-4666-5039-8.ch001 · Cited by 73
Self-citationKnowledge Management in Lean Production Systems
Dombrowski, U., Mielke, T., & Engel, C. (2012) · Procedia CIRP · doi:10.1016/j.procir.2012.07.075 · Cited by 68
Assembly simulations in virtual environments with optimized haptic path and sequence
Christiand, C., & Yoon, J. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2010.07.015 · Cited by 65
Virtual reality: Avatars in human spaceflight training
Osterlund, J., & Lawrence, B. (2011) · Acta Astronautica · doi:10.1016/j.actaastro.2011.08.011 · Cited by 64
A novel facility layout planning and optimization methodology
Jiang, S., & Nee, A. Y. C. (2013) · CIRP Annals · doi:10.1016/j.cirp.2013.03.133 · Cited by 63
(2012) · InTech eBooks · doi:10.5772/1406 · Cited by 57
Helu, M., Vijayaraghavan, A., & Dornfeld, D. A. (2011) · CIRP Annals · doi:10.1016/j.cirp.2011.03.020 · Cited by 55
ErgoToolkit: an ergonomic analysis tool in a virtual manufacturing environment
Alexopoulos, K., Mavrikios, D., & Chryssolouris, G. (2012) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2012.731610 · Cited by 52
Analyzing vulnerabilities between SCADA system and SUC due to interdependencies
Nan, C., Eusgeld, I., & Kröger, W. (2013) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2012.12.014 · Cited by 48
Mavrikios, D., Karabatsou, V., Παππάς, Μ., & Chryssolouris, G. (2006) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2006.05.009 · Cited by 43
Managing critical success strategies for an enterprise resource planning project
Yeh, C., & Xu, Y. (2013) · European Journal of Operational Research · doi:10.1016/j.ejor.2013.04.032 · Cited by 43
A modular framework for the LCA-based simulation of production systems
Brondi, C., & Carpanzano, E. (2011) · CIRP journal of manufacturing science and technology · doi:10.1016/j.cirpj.2011.06.006 · Cited by 40
An integrated knowledge based system for sheet metal cutting–punching combination processing
Pan, M., & Rao, Y. (2009) · Knowledge-Based Systems · doi:10.1016/j.knosys.2009.02.008 · Cited by 33
The benefits of a manufacturing execution system for plantwide automation
Deuel, A. C. (1994) · ISA Transactions · doi:10.1016/0019-0578(94)90042-6 · Cited by 31
Analyzing supply chain robustness for OEMs from a life cycle perspective using life cycle simulation
Komoto, H., Tomiyama, T., Silvester, S., & Brezet, H. C. (2009) · International Journal of Production Economics · doi:10.1016/j.ijpe.2009.11.017 · Cited by 29
The Swedish Remanufacturing Industry - An Overview of Present Status and Future Potential
Sundin, E., Tang, O., & Mårtén, E. (2005) · Cited by 25
An integrated framework for control system simulation and regulatory compliance monitoring
Mahoney, W., & Gandhi, R. A. (2011) · International Journal of Critical Infrastructure Protection · doi:10.1016/j.ijcip.2011.03.002 · Cited by 21
Using Augmented Reality Technology to Support the Automobile Development
Fründ, J., Gausemeier, J., Matysczok, C., & Radkowski, R. (2005) · Lecture notes in computer science · doi:10.1007/11568421_29 · Cited by 19
GUPTA, A., Singh, K., & VERMA, R. (2010) · DOAJ (DOAJ: Directory of Open Access Journals) · Cited by 19
An integrated CAPP/CAM system for stamping die pattern machining
Shin, H., Olling, G. J., Chung, Y., et al. (2002) · Computer-Aided Design · doi:10.1016/s0010-4485(02)00053-2 · Cited by 17
Chryssolouris, G., Mavrikios, D., & Παππάς, Μ. (2008) · Springer eBooks · doi:10.1007/978-3-540-78431-9_5 · Cited by 11
Developing and Applying AR Technology in Design, Production, Service and Training
Baratoff, G., & Regenbrecht, H. T. (2004) · Springer eBooks · doi:10.1007/978-1-4471-3873-0_12 · Cited by 10
Cited by
Scanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems
Alcácer, V., & Cruz-Machado, V. (2019) · Engineering Science and Technology, an International Journal · doi:10.1016/j.jestch.2019.01.006 · Cited by 1,063
A review of Internet of Things (IoT) embedded sustainable supply chain for industry 4.0 requirements
Manavalan, E., & Jayakrishna, K. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2018.11.030 · Cited by 1,054
Simulation in the design and operation of manufacturing systems: state of the art and new trends
Mourtzis, D. (2020) · International Journal of Production Research · doi:10.1080/00207543.2019.1636321 · Cited by 727
Self-citationSubstantial capabilities of robotics in enhancing industry 4.0 implementation
Javaid, M., Haleem, A., Singh, R. P., & Suman, R. (2021) · Cognitive Robotics · doi:10.1016/j.cogr.2021.06.001 · Cited by 563
Moktadir, M. A., Ali, S. M., Kusi-Sarpong, S., & Shaikh, M. A. A. (2018) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2018.04.020 · Cited by 422
Metadata
- Authors
- Mourtzis, D., Doukas, M., & Bernidaki, D.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2014
- Volume
- 25
- Pages
- 213-229
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W2013150564
- Cited by
- 356
- References
- 61
- FWCI
- 13.77
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.