The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Industrial Big Data Analytics and Cyber-physical Systems for Future Maintenance & Service Innovation
Open accessAbstract
With the rapid advancement of Information and Communication Technologies (ICT) and the integration of advanced analytics into manufacturing, products and services, many industries are facing new opportunities and at the same time challenges of maintaining their competency and market needs. Such integration, which is called Cyber-physical Systems (CPS), is transforming the industry into the next level. CPS facilitates the systematic transformation of massive data into information, which makes the invisible patterns of degradations and inefficiencies visible and yields to optimal decision-making. This paper focuses on existing trends in the development of industrial big data analytics and CPS. Then it briefly discusses a systematic architecture for applying CPS in manufacturing called 5C. The 5C architecture includes necessary steps to fully integrate cyber-physical systems in the manufacturing industry. Finally, a case study for designing smart machines through the 5C CPS architecture is presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems
Lee, J., Bagheri, B., & Kao, H.-A. (2015) · Manufacturing Letters · doi:10.1016/j.mfglet.2014.12.001 · Cited by 5,113
Self-citationRecent advances and trends in predictive manufacturing systems in big data environment
Lee, J., Lapira, E., Bagheri, B., & Kao, H.-A. (2013) · Manufacturing Letters · doi:10.1016/j.mfglet.2013.09.005 · Cited by 1,090
Self-citationA survey of Cyber-Physical Systems
Shi, J., Wan, J., Yan, H., & Suo, H. (2011) · 2011 International Conference on Wireless Communications and Signal Processing (WCSP) · doi:10.1109/wcsp.2011.6096958 · Cited by 608
Implementation of total productive maintenance: A case study
Chan, F. T. S., Lau, H. C. W., Ip, R. W. L., Chan, H. K., & Kong, S. (2005) · International Journal of Production Economics · doi:10.1016/j.ijpe.2003.10.021 · Cited by 392
Kopetz, H. (2011) · Real-Time Systems Series · doi:10.1007/978-1-4419-8237-7_13 · Cited by 204
Improving Machine Tool Interoperability Using Standardized Interface Protocols: MT Connect
Vijayaraghavan, A., Sobel, W., Fox, A., Dornfeld, D. A., & Warndorf, P. (2008) · eScholarship (California Digital Library) · Cited by 104
Yang, S., Bagheri, B., Kao, H.-A., & Lee, J. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4030669 · Cited by 47
Self-citation
Cited by
Literature review of Industry 4.0 and related technologies
Oztemel, E., & Gursev, S. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1433-8 · Cited by 2,143
Predictive maintenance in the Industry 4.0: A systematic literature review
Zonta, T., da Costa, C. A., da Rosa Righi, R., de Lima, M. J., da Trindade, E. S., & Li, G. P. (2020) · Computers & Industrial Engineering · doi:10.1016/j.cie.2020.106889 · Cited by 1,302
Industrial artificial intelligence for industry 4.0-based manufacturing systems
Lee, J., Davari, H., Singh, J., & Pandhare, V. (2018) · Manufacturing Letters · doi:10.1016/j.mfglet.2018.09.002 · Cited by 870
Self-citationMikalef, P., Boura, M., Lekakos, G., & Krogstie, J. (2019) · British Journal of Management · doi:10.1111/1467-8551.12343 · Cited by 835
The evolution and future of manufacturing: A review
Esmaeilian, B., Behdad, S., & Wang, B. (2016) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2016.03.001 · Cited by 686
Metadata
- Authors
- Lee, J., Ardakani, H. D., Yang, S., & Bagheri, B.
- Venue
- Procedia CIRP
- Publisher
- Elsevier BV
- Published
- 2015
- Volume
- 38
- Pages
- 3-7
- ISSN
- 2212-8271 (ISSN-L)
- OpenAlex
- W1845903142
- Cited by
- 382
- References
- 7
- FWCI
- 43.93
- Type
- journal article
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.