The DOI matches its Crossref record; 57 of the 57 references it cites were found in a registry or an index.
A Review of Gear Fault Diagnosis Using Various Condition Indicators
Open accessAbstract
Plentiful work has been done for condition monitoring (CI) and fault diagnosis of fixed-axis gearboxes. However, still it is found that articles citing condition indicators for fault diagnosis of gearboxes are less in quantity, in academic journals, conference proceedings and technical reports. The specialty of condition indicators is to provide accurate information regarding the condition of various components at different levels of damage (initial, heavy or growing). Here, these indicators are addressed domain-wise and their characteristics are stated. The objective of this paper is to review and encapsulate this literature to provide a wide and good reference for researchers to be utilized. The structure of a fixed-axis gearbox is briefly introduced. The unique behaviors and fault characteristics of fixed-axis gearbox is recognized and studied. Investigations on the basis of statistical indicators are also summarized based on the adopted methodologies. Lastly, open problems are stated and further research prospects pointed out.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fast computation of the kurtogram for the detection of transient faults
Antoni, J. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2005.12.002 · Cited by 1,601
The spectral kurtosis: a useful tool for characterising non-stationary signals
Antoni, J. (2006) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2004.09.001 · Cited by 1,441
Maximum correlated Kurtosis deconvolution and application on gear tooth chip fault detection
McDonald, G. L., Zhao, Q. Z., & Zuo, M. J. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.06.010 · Cited by 768
Condition monitoring and fault diagnosis of planetary gearboxes: A review
Lei, Y., Lin, J., Zuo, M. J., & He, Z. (2014) · Measurement · doi:10.1016/j.measurement.2013.11.012 · Cited by 731
A review of recent advances in wind turbine condition monitoring and fault diagnosis
Lu, B., Li, Y., Wu, X., & Yang, Z. (2009) · IEEE Power Electronics and Machines in Wind Applications (PEMWA) · doi:10.1109/pemwa.2009.5208325 · Cited by 584
A review of vibration-based techniques for helicopter transmission diagnostics
Samuel, P. D., & Pines, D. J. (2005) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2004.02.058 · Cited by 518
Dynamic simulation of spur gear with tooth root crack propagating along tooth width and crack depth
Chen, Z., & Shao, Y. (2011) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2011.07.006 · Cited by 502
Fault diagnosis of rotating machinery based on multiple ANFIS combination with gas
Lei, Y., He, Z., Zi, Y., & Hu, Q. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2006.11.003 · Cited by 500 · cited 3×
“(22) Mean frequency- It is a frequency domain parameter, extracted from the frequency spectrum of the gear vibration signal [[27]].”
InfluentialDetecting Fatigue Cracks in Gears by Amplitude and Phase Demodulation of the Meshing Vibration
McFadden, P. D. (1986) · Journal of vibration and acoustics · doi:10.1115/1.3269317 · Cited by 423
Simulation of spur gear dynamics and estimation of fault growth
Wu, S., Zuo, M. J., & Parey, A. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.03.038 · Cited by 419
Self-citationBarszcz, T., & Randall, R. B. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.07.019 · Cited by 409
EARLY DETECTION OF GEAR TOOTH CRACKING USING THE RESONANCE DEMODULATION TECHNIQUE
Wang, W. (2001) · Mechanical Systems and Signal Processing · doi:10.1006/mssp.2001.1416 · Cited by 295
Detection of non-Gaussian signals by frequency domain Kurtosis estimation
Dwyer, R. F. (2005) · IEEE International Conference on Acoustics Speech and Signal Processing · doi:10.1109/icassp.1983.1172264 · Cited by 287
Shen, C., Wang, D., Kong, F., & Tse, P. W. (2013) · Measurement · doi:10.1016/j.measurement.2012.12.011 · Cited by 262
A multidimensional hybrid intelligent method for gear fault diagnosis
Lei, Y., Zuo, M. J., He, Z., & Zi, Y. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.06.060 · Cited by 240
Condition Indicators for Gearbox Condition Monitoring Systems
Večeř, P., Kreidl, M., & Šmíd, R. (2005) · Acta Polytechnica · doi:10.14311/782 · Cited by 210
Optimal filtering of gear signals for early damage detection based on the spectral kurtosis
Combet, F., & Gelman, L. (2009) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2008.08.002 · Cited by 190
Fault features analysis of cracked gear considering the effects of the extended tooth contact
Ma, H., Pang, X., Feng, R., Song, R., & Wen, B. (2014) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2014.11.018 · Cited by 185
A time domain approach to diagnose gearbox fault based on measured vibration signals
Hong, L., & Dhupia, J. S. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2013.11.033 · Cited by 183
Mohammed, O. D., Rantatalo, M., & Aidanpää, J.-O. (2013) · Engineering Failure Analysis · doi:10.1016/j.engfailanal.2013.08.008 · Cited by 169
Λούτας, Θ., Sotiriades, G., Kalaitzoglou, I., & Kostopoulos, V. (2009) · Applied Acoustics · doi:10.1016/j.apacoust.2009.04.007 · Cited by 152
Review of Condition Monitoring and Fault Diagnosis Technologies for Wind Turbine Gearbox
Nie, M., & Wang, L. (2013) · Procedia CIRP · doi:10.1016/j.procir.2013.07.018 · Cited by 139
McFadden, P. D., & Smith, J. D. (1985) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/pime_proc_1985_199_125_02 · Cited by 139
Yu, D., Yang, Y., & Cheng, J. (2007) · Measurement · doi:10.1016/j.measurement.2007.03.004 · Cited by 133
Acoustic emission detection of rail defect based on wavelet transform and Shannon entropy
Zhang, X., Feng, N., Wang, Y., & Shen, Y. (2014) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2014.11.021 · Cited by 130
Liu, H., Huang, W., Wang, S., & Zhu, Z. (2013) · Signal Processing · doi:10.1016/j.sigpro.2013.05.013 · Cited by 123
An Analysis of Gear Fault Detection Methods as Applied to Pitting Fatigue Failure Data
Zakrajsek, J. J., Townsend, D. P., & Decker, H. J. (1993) · Defense Technical Information Center (DTIC) · Cited by 104
BASE WAVELET SELECTION FOR BEARING VIBRATION SIGNAL ANALYSIS
Yan, R., & Gao, R. X. (2009) · International Journal of Wavelets Multiresolution and Information Processing · doi:10.1142/s0219691309002994 · Cited by 94
Effect of cracks and pitting defects on gear meshing
Fernández, A., Viadero, F., Iglesias, M., De-Juan, A., Fernández, P. G., & Sancibrián, R. (2012) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1177/0954406212437104 · Cited by 90
Asynchronous input gear damage diagnosis using time averaging and wavelet filtering
Jafarizadeh, M. A., Hassannejad, R., Ettefagh, M. M., & Chitsaz, S. (2007) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2007.06.006 · Cited by 76
Spiral Bevel Pinion Crack Detection in a Helicopter Gearbox
Decker, H. J., & Lewicki, D. G. (2003) · Vertical Flight Society Annual Forum & Technology Display (VFS Forum) · doi:10.4050/vfs-f59-000169 · Cited by 66
Gear parameter identification in a wind turbine gearbox using vibration signals
Sawalhı, N., & Randall, R. B. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.08.017 · Cited by 58
Model-based condition index for tracking gear wear and fatigue damage
Li, C., & Limmer, J. D. (2000) · Wear · doi:10.1016/s0043-1648(00)00356-2 · Cited by 57
Constrained adaptive lifting and the CAL4 metric for helicopter transmission diagnostics
Samuel, P. D., & Pines, D. J. (2008) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2008.06.018 · Cited by 55
An approach to fault diagnosis of helicopter planetary gears
Saxena, A. (2005) · IEEE AUTOTESTCON (IEEE Systems Readiness Technology Conference) · doi:10.1109/autest.2004.1436936 · Cited by 49
CRACK DETECTION FOR AEROSPACE QUALITY SPUR GEARS
Decker, H. J. (2002) · Vertical Flight Society Forum · doi:10.4050/vfs-f58-00038 · Cited by 48
Application of fault detection techniques to spiral bevel gear fatigue data
Zakrajsek, J. J., Handschuh, R. F., & Decker, H. J. (1994) · Cited by 39
Chen, J., Zi, Y., He, Z., & Wang, X. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.03.005 · Cited by 35
Gear failure prediction using multiscale local statistics
Loutridis, S. (2007) · Engineering Structures · doi:10.1016/j.engstruct.2007.07.022 · Cited by 34
Quantification of Condition Indicator Performance on a Split Torque Gearbox
Bechhoefer, E. R., Li, R., & He, D. (2009) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-009-0346-y · Cited by 32
Gear Fault Detection with Time‐Frequency Based Parameter NP4
Polyshchuk, V., Choy, F. K., & BRAUN, M. J. (2002) · International Journal of Rotating Machinery · doi:10.1155/s1023621x02000064 · Cited by 29
Signal Processing Techniques to Improve an Acoustic Emissions Sensor
Bechhoefer, E. R., Qu, Y., Zhu, J., & He, D. (2013) · Annual Conference of the PHM Society · doi:10.36001/phmconf.2013.v5i1.2174 · Cited by 29
Bartelmus, W. (2011) · Journal of Physics Conference Series · doi:10.1088/1742-6596/305/1/012029 · Cited by 26
Evaluation of Gear Condition Indicator Performance on Rotorcraft Fleet
Antolick, L. J., Branning, J. S., Dempsey, P., & Wade, D. (2010) · Vertical Flight Society Forum · doi:10.4050/vfs-f66-000160 · Cited by 25
Time synchronous averaging of ball mill vibrations
Szczepanik, A. (1989) · Mechanical Systems and Signal Processing · doi:10.1016/0888-3270(89)90025-3 · Cited by 25
An enhancement to the NA4 gear vibration diagnostic parameter
Deckeer, H. J., Handschuh, R. F., & Zakrajsek, J. J. (1994) · NASA STI/Recon Technical Report N · Cited by 24
Yuan, J. P., He, Z., Zi, Y., & Liu, H. (2009) · Science China Technological Sciences · doi:10.1007/s11431-009-0253-7 · Cited by 24
Detecting gear tooth fatigue cracks in advance of complete fracture
Zakrajsek, J. J., & Lewicki, D. G. (1998) · Tribotest · doi:10.1002/tt.3020040407 · Cited by 24
Features for Fault Diagnosis and Prognosis of Gearbox
Zhang, X., Kang, J., Zhao, J., & Cao, D. (2013) · Chemical engineering transactions · doi:10.3303/cet1333172 · Cited by 22
New Gear-Fault-Detection Parameter by Use of Joint Time-Frequency Distribution
Polyshchuk, V., Choy, F. K., & BRAUN, M. J. (2000) · Journal of Propulsion and Power · doi:10.2514/2.5575 · Cited by 20
A new feature extraction method for gear fault diagnosis and prognosis
Zhang, X., Kang, J., Bechhoefer, E. R., & Zhao, J. (2014) · Eksploatacja i Niezawodnosc - Maintenance and Reliability · Cited by 19
Split torque type gearbox fault detection using acoustic emission and vibration sensors
He, D., Li, R., & Bechhoefer, E. R. (2010) · International Conference on Networking, Sensing and Control · doi:10.1109/icnsc.2010.5461545 · Cited by 19
Vibration signature analysis of a faulted gear transmission system
(1994) · AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit · doi:10.2514/6.1994-2937 · Cited by 19
Review of Vibration-Based Helicopters Health and Usage Monitoring Methods
Giurgiutiu, V., Cuc, A., & Goodman, P. (2001) · Cited by 18
An enhancement to the NA4 gear vibration diagnostic parameter
Decker, H. J., Handschuh, R. F., & Zakrajsek, J. J. (1994) · Annual Meeting · Cited by 18
A Review of Transmission Diagnostics Research at NASA Lewis Research Center.
Zakajsek, J. J. (1994) · NASA Technical Reports Server (NASA) · Cited by 17
Shen, C.-H., Wen, J., Arunyanart, P., & Choy, F. K. (2011) · ISRN Mechanical Engineering · doi:10.5402/2011/402928 · Cited by 13
Cited by
Fink, O., Wang, Q., Svensén, M., Dersin, P., Lee, W.-J., & Ducoffe, M. (2020) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2020.103678 · Cited by 549
Automatic Crack Classification by Exploiting Statistical Event Descriptors for Deep Learning
Siracusano, G., Garescì, F., Finocchio, G., Tomasello, R., Lamonaca, F., Scuro, C., Carpentieri, M., Chiappini, M., & La Corte, A. (2021) · Applied Sciences · doi:10.3390/app112412059 · Cited by 39
Metadata
- Authors
- Sharma, V., & Parey, A.
- Venue
- Procedia Engineering
- Publisher
- Elsevier BV
- Published
- 2016
- Volume
- 144
- Pages
- 253-263
- ISSN
- 1877-7058 (ISSN-L)
- OpenAlex
- W2396076036
- Cited by
- 295
- References
- 57
- FWCI
- 27.69
- Type
- conference paper
- Language
- en
- Open access
- diamond
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.