The DOI matches its Crossref record; 247 of the 247 references it cites were found in a registry or an index.
Advances in sustainable thermosetting resins: From renewable feedstock to high performance and recyclability
Abstract
In polymer science and industry, the important role of thermosetting resin is well-recognized. However, most thermosets suffer from the overdependence on petroleum resource and in addition are linked to environmental concerns. The development of sustainable thermosetting resins thus has become an objective of contemporary research. Addressing this need generally requires renewable feedstocks, satisfied comprehensive properties, and long service life or recyclability. Herein, a systematic overview regarding recent advances in sustainable thermosetting resins is provided. Firstly, the origins and access of bio-based platform compounds successfully applied in the bio-based thermosetting resins are being discussed. Subsequently, the synthesis, structure-property relationships, and methodologies for the functionalization of three typical bio-based thermosets, including benzoxazine, epoxy resin and unsaturated polyester, are being reviewed. Finally, strategies for the recycling of bio-based thermoset waste products are being presented. The objective of this work is not only to summarize the recent progress on sustainable thermosets, but also help us understand them more deeply and widely in a short time, so as to promote their faster development.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–247 of 247
Dai, Z., Yang, Z., Chen, Z., Zhao, Z., Lou, Y., Zhang, Y.-Y., Liu, T.-Z., Fu, F.-Y., Fu, Y.-Q., & Liu, X. (2018) · ACS Sustainable Chemistry and Engineering · doi:10.1021/acssuschemeng.8b03539 · Cited by 57
Self-citationYue, L., Liu, F., Mekala, S., Patel, A., Gross, R. A., & Manas‐Zloczower, I. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b06073 · Cited by 57
Chemical modifications of lignin for the preparation of macromers containing cyclic carbonates
Salanti, A., Zoia, L., & Orlandi, M. E. (2016) · Green Chemistry · doi:10.1039/c6gc01028h · Cited by 55
Mauck, J. R., Yadav, S. K., Sadler, J. M., Scala, J. J. L., Palmese, G. R., Schmalbach, K. M., & Stanzione, J. F. (2017) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201700013 · Cited by 54
Li, C., Dai, J., Liu, X., Jiang, Y., Ma, S., & Zhu, J. (2016) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201600055 · Cited by 51
Self-citationSelf-healing polymers based on eugenol via combination of thiol-ene and thiol oxidation reactions
Cheng, C., Zhang, X., Chen, X., Li, J., Huang, Q., Hu, Z., & Tu, Y. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1001-x · Cited by 51
de Oliveira, J. R., Kotzebue, L. R. V., Ribeiro, F. W. M., Mota, B. C., Zampieri, D., Mazzetto, S. E., Ishida, H., & Lomonaco, D. (2017) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.28755 · Cited by 51
Effect of solvents on the curing and properties of fully bio-based thermosets for coatings
Ma, S., Kovash, C. S., & Webster, D. C. (2016) · Journal of Coatings Technology and Research · doi:10.1007/s11998-016-9863-8 · Cited by 50
Synthesis and characterization of fully bio-based unsaturated polyester resins
Fidanovski, B. Z., Spasojevic, P. M., Panić, V. V., Šešlija, S. I., Spasojevic, J. P., & Popović, I. G. (2017) · Journal of Materials Science · doi:10.1007/s10853-017-1822-y · Cited by 50
Biobased Cationically Polymerizable Epoxy Thermosets from Furan and Fatty Acid Derivatives
Nameer, S., Larsen, D. B., Duus, J. Ø., Daugaard, A. E., & Johansson, M. K. G. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01817 · Cited by 48
Epoxidized rosin acids as co-precursors for epoxy resins
Brocas, A., Llevot, A., Mantzaridis, C., Cendejas, G., Auvergne, R., Caillol, S., Carlotti, S., & Cramail, H. (2013) · Designed Monomers & Polymers · doi:10.1080/15685551.2013.840504 · Cited by 47
New bio‐based epoxy materials and foams from microalgal oil
Négrell, C., Cornille, A., Nascimento, P. D. A., Robin, J., & Caillol, S. (2016) · European Journal of Lipid Science and Technology · doi:10.1002/ejlt.201600214 · Cited by 45
Oh, Y., Lee, K. M., Jung, D., Chae, J. A., Kim, H. J., Chang, M., Park, J., & Kim, H. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00008 · Cited by 45
Bio-based shape memory epoxy resin synthesized from rosin acid
Li, T., Liu, X., Jiang, Y., Ma, S., & Zhu, J. (2016) · Iranian Polymer Journal · doi:10.1007/s13726-016-0482-0 · Cited by 43
Self-citationMehta, L. B., Wadgaonkar, K. K., & Jagtap, R. N. (2018) · Journal of Dispersion Science and Technology · doi:10.1080/01932691.2018.1480964 · Cited by 42
Synthesis of thermally degradable epoxy adhesives
Luo, K., Xie, T., & Rzayev, J. (2013) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.26926 · Cited by 41
Wright, L. W., & Brandner, J. D. (1964) · The Journal of Organic Chemistry · doi:10.1021/jo01033a043 · Cited by 40
Farmer, T. J., Clark, J. H., MacQuarrie, D. J., Ogunjobi, J. K., & Castle, R. L. (2016) · Polymer Chemistry · doi:10.1039/c5py01729g · Cited by 40
Conversion of biomass-derived sorbitol to glycols over carbon-materials supported Ru-based catalysts
Guo, X., Guan, J., Li, B., Wang, X., Mu, X., & Liu, H. (2015) · Scientific Reports · doi:10.1038/srep16451 · Cited by 40
Soybean oil based thermoset networks via photoinduced CuAAC click chemistry
Uysal, N., Acik, G., & Taşdelen, M. A. (2017) · Polymer International · doi:10.1002/pi.5346 · Cited by 39
Tang, T., & Takasu, A. (2014) · RSC Advances · doi:10.1039/c4ra13020k · Cited by 38
Photo-oxidative degradation behavior of linseed oil based epoxy resin
Dupuis, A., Perrin, F. X., Torres, A. U., Habas, J., Bélec, L., & Chailan, J. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.11.021 · Cited by 38
Gazzotti, S., Hakkarainen, M., Adolfsson, K. H., Ortenzi, M. A., Farina, H., Lesma, G., & Silvani, A. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b03655 · Cited by 37
Sustainability and antimicrobial assessments of apigenin based polybenzoxazine film
Periyasamy, T., Manoharan, R. K., Asrafali, S. P., et al. (2019) · Polymer · doi:10.1016/j.polymer.2019.03.048 · Cited by 37
Anhydride Cured Bio‐Based Epoxy Resin: Effect of Moisture on Thermal and Mechanical Properties
Anusic, A., Resch‐Fauster, K., Mahendran, A. R., & Wuzella, G. (2019) · Macromolecular Materials and Engineering · doi:10.1002/mame.201900031 · Cited by 35
Shimasaki, T., Yoshihara, S., & Shibata, M. (2012) · Polymer Composites · doi:10.1002/pc.22327 · Cited by 34
Investigation of curing rates of bio-based thiol-ene films from diallyl 2,5-furandicaboxylate
Larsen, D. B., Sønderbæk‐Jørgensen, R., Duus, J. Ø., & Daugaard, A. E. (2018) · European Polymer Journal · doi:10.1016/j.eurpolymj.2018.03.005 · Cited by 34
Farmer, T. J., MacQuarrie, D. J., Comerford, J. W., Pellis, A., & Clark, J. H. (2018) · Journal of Polymer Science Part A Polymer Chemistry · doi:10.1002/pola.29079 · Cited by 34
He, M. Y., Zhou, J., Zhang, H., Luo, Z., & Yao, J. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42488 · Cited by 31
Yang, M., Wu, Y., Liu, Y., Qiu, J., & Liu, C. (2019) · Polymer Chemistry · doi:10.1039/c9py01253b · Cited by 31
Zhao, L., Zhang, L., & Wang, Z. (2015) · RSC Advances · doi:10.1039/c5ra18658g · Cited by 29
Jahandideh, A., & Muthukumarappan, K. (2016) · European Polymer Journal · doi:10.1016/j.eurpolymj.2016.08.033 · Cited by 28
Unexpected Healability of an ortho-Blocked Polybenzoxazine Resin
Zhang, L., Zhao, Z., Dai, Z., Xu, L., Fu, F., Endo, T., & Liu, X. (2019) · ACS Macro Letters · doi:10.1021/acsmacrolett.9b00083 · Cited by 25
Self-citationBio-based Unsaturated Polyesters
Li, Q., Ma, S., Xu, X., & Zhu, J. (2019) · Elsevier eBooks · doi:10.1016/b978-0-12-816129-6.00020-x · Cited by 25
Self-citationJung, J. Y., Park, C., & Lee, E. Y. (2017) · Journal of Wood Chemistry and Technology · doi:10.1080/02773813.2017.1310901 · Cited by 24
Huo, L., Wang, D., Liu, H., Jia, P., & Gao, J. (2016) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2016.1183332 · Cited by 23
Processability improvement of a 4-vinlyguiacol derived benzoxazine using reactive diluents
Lou, Y., Zhao, Z., Chen, Z., Dai, Z., Fu, F., Zhang, Y., Zhang, L., & Liu, X. (2018) · Polymer · doi:10.1016/j.polymer.2018.11.056 · Cited by 19
Self-citationSaikia, A., Hazarika, D., & Karak, N. (2018) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2018.11.012 · Cited by 18
Moore, O. B., HANSON, P., Comerford, J. W., Pellis, A., & Farmer, T. J. (2019) · Frontiers in Chemistry · doi:10.3389/fchem.2019.00501 · Cited by 17
Versatile bio‐based epoxy resin: From banana waste to applied materials
Li, R., Li, W., Zheng, F., Zhang, Y., & Hu, J. (2018) · Journal of Applied Polymer Science · doi:10.1002/app.47135 · Cited by 16
Sung, J., Li, Y., & Sun, X. S. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41773 · Cited by 14
Hou, G., Gao, J., Xie, J., & Li, B. (2015) · Soft Materials · doi:10.1080/1539445x.2015.1098704 · Cited by 14
Fonseca, A. C., Costa, C. S. M. F., Marques, T. M. P., Coelho, J. F. J., & Serra, A. C. (2016) · Journal of Materials Science · doi:10.1007/s10853-016-0422-6 · Cited by 14
Li, T., Liu, X., Jiang, Y., Ma, S., & Zhu, J. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44219 · Cited by 13
Self-citationSelf-organization of sepiolite fibbers in a biobased thermoset
Falco, G., Giulieri, F., Volle, N., Pagnotta, S., Sbirrazzuoli, N., Peuvrel‐Disdier, E., & Mija, A. (2018) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.12.025 · Cited by 12
Cao, L., Liu, X., Li, C., Dai, J., & Zhu, J. (2015) · Polymer Composites · doi:10.1002/pc.23732 · Cited by 7
Self-citation
Cited by
Zhong, L., Hao, Y., Zhang, J., Wei, F., Li, T., Miao, M., & Zhang, D. (2022) · Macromolecules · doi:10.1021/acs.macromol.1c02247 · Cited by 266
Metadata
- Authors
- Liu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X.
- Venue
- Progress in Polymer Science
- Publisher
- Elsevier BV
- Published
- 2021-02
- Volume
- 113
- Pages
- 101353
- ISSN
- 0079-6700 (ISSN-L)
- OpenAlex
- W3117449449
- Cited by
- 418
- References
- 247
- FWCI
- 21.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.