Cited by 124Adsorption and biosorption for pollutant removalCoagulation and Flocculation StudiesEnvironmental remediation with nanomaterials

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Jujube stones based highly efficient activated carbon for methylene blue adsorption: Kinetics and isotherms modeling, thermodynamics and mechanism study, optimization via response surface methodology and machine learning approaches

Open access

Overview

Integrity signals

Registry

Crossref · 10.1016/j.psep.2022.12.028

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

We couldn’t retrieve this paper’s full text, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

  • Activated carbon is the most common adsorbent because it exhibits high removal efficiency.

    “The most common adsorbent is activated carbon since it exhibits high efficiency in the removal (Bouchelkia et al. 2023; Fito et al. 2023; B. A. Mohamed et al. 2023; Obayomi et al. 2023; Raninga et al. 2023; Valério Filho et al. 2023).”

Citations

Cites

Flagged first, then by citations

Research works printed but not linked: 113

  1. Ab Ghani, 2017, Optimization of preparation conditions for activated carbon from banana pseudo-stem using response surface methodology on removal of color and COD from landfill leachate, Waste Manag., 62, 177, 10.1016/j.wasman.2017.02.026 · DOI
  2. Abbas, 2021, Modeling of adsorption isotherms of heavy metals onto Apricot stone activated carbon: two-parameter models and equations allowing determination of thermodynamic parameters, Mater. Today.: Proc., 43, 3359
  3. Abdulhameed, 2019, Modeling and mechanism of reactive orange 16 dye adsorption by chitosan-glyoxal/TiO2 nanocomposite: application of response surface methodology, Desalin. Water Treat., 164, 346, 10.5004/dwt.2019.24384 · DOI
  4. Abdulhameed, 2021, Statistical modeling and mechanistic pathway for methylene blue dye removal by high surface area and mesoporous grass-based activated carbon using K2CO3 activator, J. Environ. Chem. Eng., 9, 10.1016/j.jece.2021.105530 · DOI
  5. Ahmed, 2012, Equilibrium isotherms and kinetics modeling of methylene blue adsorption on agricultural wastes-based activated carbons, Fluid Phase Equilibria, 317, 9, 10.1016/j.fluid.2011.12.026 · DOI · Paper page
  6. Alhalili, 2022, Green synthesis of copper oxide nanoparticles CuO NPs from Eucalyptus Globoulus leaf extract: Adsorption and design of experiments, Arab. J. Chem., 15, 10.1016/j.arabjc.2022.103739 · DOI
  7. Aminu, 2020, Adsorption isotherms and kinetic studies of Congo-red removal from waste water using activated carbon prepared from jujube seed, Am. J. Anal. Chem., 11, 47, 10.4236/ajac.2020.111004 · DOI
  8. Angın, 2013, Effect of pyrolysis temperature and heating rate on biochar obtained from pyrolysis of safflower seed press cake, Bioresour. Technol., 128, 593, 10.1016/j.biortech.2012.10.150 · DOI · Paper page
  9. Aravind, 2022, Enhanced photocatalytic and biological observations of green synthesized activated carbon, activated carbon doped silver and activated carbon/silver/titanium dioxide nanocomposites, J. Inorg. Organomet. Polym. Mater., 32, 267, 10.1007/s10904-021-02096-w · DOI
  10. Asfaram, 2016, Statistical experimental design, least squares-support vector machine (LS-SVM) and artificial neural network (ANN) methods for modeling the facilitated adsorption of methylene blue dye, RSC Adv., 6, 40502, 10.1039/C6RA01874B · DOI
  11. Bahnes, 2018, Preparation of a novel activated carbon from jujube stones (Ziziphus jujuba) for the removal of basic and acid dyes, Desalin. Water Treat., 102, 312, 10.5004/dwt.2018.21854 · DOI
  12. Baidya, 2021, Adsorption of brilliant green dye from aqueous solution onto chemically modified areca nut husk, South Afr. J. Chem. Eng., 35, 33, 10.1016/j.sajce.2020.11.001 · DOI
  13. Bangari, 2022, Boron nitride nanosheets incorporated polyvinylidene fluoride mixed matrix membranes for removal of methylene blue from aqueous stream, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2021.107052 · DOI
  14. Benadjemia, 2011, Preparation, characterization and Methylene Blue adsorption of phosphoric acid activated carbons from globe artichoke leaves, Fuel Process. Technol., 92, 1203, 10.1016/j.fuproc.2011.01.014 · DOI
  15. Bencheikh, 2021, The use and the performance of chemically treated artichoke leaves for textile industrial effluents treatment, Chem. Data Collect., 31, 10.1016/j.cdc.2020.100597 · DOI
  16. Bohli, 2015, Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases, Comptes Rendus Chim., 18, 88, 10.1016/j.crci.2014.05.009 · DOI
  17. Bouchelkia, 2016, Removal of lead (II) from water using activated carbon developed from jujube stones, a low-cost sorbent, Sep. Sci. Technol., 51, 1645, 10.1080/01496395.2016.1178289 · DOI
  18. Boudechiche, 2019, Comparative study on removal of two basic dyes in aqueous medium by adsorption using activated carbon from Ziziphus lotus stones, Microchem. J., 146, 1010, 10.1016/j.microc.2019.02.010 · DOI
  19. Bousselma, 2021, Artificial intelligence and mathematical modelling of the drying kinetics of pre-treated whole apricots, Kem. U. Ind., 70, 651
  20. Box, 1960, Some new three level designs for the study of quantitative variables, Technometrics, 2, 455, 10.1080/00401706.1960.10489912 · DOI
  21. Chedri Mammar, 2020, Modeling and optimization of process parameters in elucidating the adsorption mechanism of Gallic acid on activated carbon prepared from date stones, Sep. Sci. Technol., 55, 3113, 10.1080/01496395.2019.1676785 · DOI
  22. Chen, 2011, Silkworm exuviae—a new non-conventional and low-cost adsorbent for removal of methylene blue from aqueous solutions, J. Hazard. Mater., 186, 1320, 10.1016/j.jhazmat.2010.12.006 · DOI
  23. Cheng, 2021, The adsorption properties of microporous activated carbon prepared from pistachio nut shell for low-concentration VOCs under low-medium temperatures, Environ. Sci. Pollut. Res., 28, 65216, 10.1007/s11356-021-14586-y · DOI
  24. Dao, 2021, Natural core-shell structure activated carbon beads derived from Litsea glutinosa seeds for removal of methylene blue: facile preparation, characterization, and adsorption properties, Environ. Res., 198, 10.1016/j.envres.2020.110481 · DOI
  25. Daoud, 2019, Adsorption ability of activated carbons from Phoenix dactylifera rachis and Ziziphus jujube stones for the removal of commercial dye and the treatment of dyestuff wastewater, Microchem. J., 148, 493, 10.1016/j.microc.2019.05.022 · DOI
  26. Das, 2014, Optimization of parameters for cerium (III) biosorption onto biowaste materials of animal and plant origin using 5-level Box-Behnken design: Equilibrium, kinetic, thermodynamic and regeneration studies, J. Rare Earths, 32, 745, 10.1016/S1002-0721(14)60136-8 · DOI
  27. Dotto, 2015, Adsorption of methylene blue by ultrasonic surface modified chitin, J. Colloid Interface Sci., 446, 133, 10.1016/j.jcis.2015.01.046 · DOI
  28. Douara, 2016, Sawdust-based activated carbon ability in the removal of phenol-based organics from aqueous media, Desalin. Water Treat., 57, 5529, 10.1080/19443994.2015.1005151 · DOI
  29. Du, 2021, Determination of iodine number of activated carbon by the method of ultraviolet–visible spectroscopy, Mater. Lett., 285, 10.1016/j.matlet.2020.129137 · DOI
  30. El Nemr, 2021, Evaluation of cationic methylene blue dye removal by high surface area mesoporous activated carbon derived from ulva lactuca, Environ. Process., 8, 311, 10.1007/s40710-020-00487-8 · DOI
  31. Ferreira, 2020, Adsorption performance of activated charcoal from castor seed cake prepared by chemical activation with phosphoric acid, Biomass Convers. Biorefin., 12, 1181, 10.1007/s13399-020-00660-x · DOI
  32. Gao, 2020, A promising and cost-effective biochar adsorbent derived from jujube pit for the removal of Pb (II) from aqueous solution, Sci. Rep., 10, 1
  33. Ghosh, 2015, Modeling of biosorption of Cu (II) by alkali-modified spent tea leaves using response surface methodology (RSM) and artificial neural network (ANN), Appl. Water Sci., 5, 191, 10.1007/s13201-014-0180-z · DOI
  34. Giraldo, 2021, Experimental and theoretical insights on methylene blue removal from wastewater using an adsorbent obtained from the residues of the orange industry, Molecules, 26, 4555, 10.3390/molecules26154555 · DOI
  35. González-Crisostomo, 2022, Chabazite synthesis and its exchange with Ti, Zn, Cu, Ag and Au for efficient photocatalytic degradation of methylene blue dye, Int. J. Mol. Sci., 23, 1730, 10.3390/ijms23031730 · DOI
  36. Guarín-Romero, 2019, Simple and competitive adsorption study of nickel (II) and chromium (III) on the surface of the brown algae Durvillaea antarctica biomass, ACS Omega, 4, 18147, 10.1021/acsomega.9b02061 · DOI
  37. Han, 2013, The optimization of As (V) removal over mesoporous alumina by using response surface methodology and adsorption mechanism, J. Hazard. Mater., 254, 301, 10.1016/j.jhazmat.2013.04.008 · DOI
  38. Han, 2020, High adsorption of methylene blue by activated carbon prepared from phosphoric acid treated eucalyptus residue, Powder Technol., 366, 239, 10.1016/j.powtec.2020.02.013 · DOI
  39. Hang, 1970, Methylene blue absorption by clay minerals. Determination of surface areas and cation exchange capacities (clay-organic studies XVIII), Clays Clay Miner., 18, 203, 10.1346/CCMN.1970.0180404 · DOI
  40. Helm, 2020, Machine learning and artificial intelligence: definitions, applications, and future directions, Curr. Rev. Musculoskelet. Med., 13, 69, 10.1007/s12178-020-09600-8 · DOI
  41. Hesas, 2013, Preparation and characterization of activated carbon from apple waste by microwave-assisted phosphoric acid activation: application in methylene blue adsorption, BioResources, 8, 2950
  42. Heschel, 1995, On the suitability of agricultural by-products for the manufacture of granular activated carbon, Fuel, 74, 1786, 10.1016/0016-2361(95)80009-7 · DOI
  43. Hong, 2007, Monitoring of sequencing batch reactor for nitrogen and phosphorus removal using neural networks, Biochem. Eng. J., 35, 365, 10.1016/j.bej.2007.01.033 · DOI
  44. Huang, 2019, Preparation of porous graphene/carbon nanotube composite and adsorption mechanism of methylene blue, SN Appl. Sci., 1, 37, 10.1007/s42452-018-0035-6 · DOI
  45. Ihaddaden, 2022, Removal of methylene blue (basic dye) by coagulation-flocculation with biomaterials (bentonite and Opuntia ficus indica, J. Water Process Eng., 49, 10.1016/j.jwpe.2022.102952 · DOI
  46. Jawad, 2022, Upgrading low rank coal into mesoporous activated carbon via microwave process for methylene blue dye adsorption: box Behnken design and mechanism study, Diam. Relat. Mater., 127, 10.1016/j.diamond.2022.109199 · DOI
  47. Jawad, 2018, Applicability of dragon fruit (Hylocereus polyrhizus) peels as low-cost biosorbent for adsorption of methylene blue from aqueous solution: kinetics, equilibrium and thermodynamics studies, Desalin. Water Treat., 109, 231, 10.5004/dwt.2018.21976 · DOI
  48. Jawad, 2018, Carbonization of corn (Zea mays) cob agricultural residue by one-step activation with sulfuric acid for methylene blue adsorption, Desalin. Water Treat., 118, 342, 10.5004/dwt.2018.22680 · DOI
  49. Jawad, 2018, Adsorptive removal of methylene blue by chemically treated cellulosic waste banana (Musa sapientum) peels, J. Taibah Univ. Sci., 12, 809, 10.1080/16583655.2018.1519893 · DOI
  50. Jawad, 2019, Conversion of Malaysian low-rank coal to mesoporous activated carbon: structure characterization and adsorption properties, Chin. J. Chem. Eng., 27, 1716, 10.1016/j.cjche.2018.12.006 · DOI
  51. Jawad, 2020, Insights into the modeling, characterization and adsorption performance of mesoporous activated carbon from corn cob residue via microwave-assisted H3PO4 activation, Surf. Interfaces, 21
  52. Jawad, 2020, Mesoporous activated carbon from grass waste via H3PO4-activation for methylene blue dye removal: modelling, optimisation, and mechanism study, Int. J. Environ. Anal. Chem., 1
  53. Jawad, 2021, High surface area and mesoporous activated carbon from KOH-activated dragon fruit peels for methylene blue dye adsorption: Optimization and mechanism study, Chin. J. Chem. Eng., 32, 281, 10.1016/j.cjche.2020.09.070 · DOI
  54. Jawad, 2022, Mesoporous high-surface-area activated carbon from biomass waste via microwave-assisted-H3PO4 activation for methylene blue dye adsorption: an optimized process, Diam. Relat. Mater., 128, 10.1016/j.diamond.2022.109288 · DOI
  55. Khan, 2020, Surface oxidized and un-oxidized activated carbon derived from Ziziphus jujube Stem, and its application in removal of Cd (II) and Pb (II) from aqueous media, SN Appl. Sci., 2, 1, 10.1007/s42452-020-2578-6 · DOI
  56. Khoo, 2013, Removal of basic dyes from aqueous solution using sugarcane bagasse: optimization by Plackett–Burman and response surface methodology, Desalin. Water Treat., 51, 7109, 10.1080/19443994.2013.791774 · DOI
  57. Khuongab, 2021, Activated carbon produced from bamboo and solid residue by CO2 activation utilized as CO2 adsorbents, Biomass Bioenergy, 148
  58. Kibami, 2014, Preparation and characterization of activated carbon from Fagopyrum esculentum Moench by HNO3 and H3PO4 chemical activation, Der Chem. Sin., 5, 46
  59. Kıvanç, 2020, A statistical optimization of methylene blue removal from aqueous solutions by Agaricus Campestris using multi-step experimental design with response surface methodology: Isotherm, kinetic and thermodynamic studies, Surf. Interfaces, 18
  60. Kundu, 2015, Taguchi optimization approach for production of activated carbon from phosphoric acid impregnated palm kernel shell by microwave heating, J. Clean. Prod., 105, 420, 10.1016/j.jclepro.2014.06.093 · DOI
  61. Labied, 2018, Adsorption of hexavalent chromium by activated carbon obtained from a waste lignocellulosic material (Ziziphus jujuba cores): Kinetic, equilibrium, and thermodynamic study, Adsorpt. Sci. Technol., 36, 1066, 10.1177/0263617417750739 · DOI · Paper page
  62. Lakshmi, 2021, Artificial intelligence (AI) applications in adsorption of heavy metals using modified biochar, Sci. Total Environ., 801, 10.1016/j.scitotenv.2021.149623 · DOI
  63. Li, 2022, Rapid and efficient adsorption of methylene blue dye from aqueous solution by hierarchically porous, activated starbons®: mechanism and porosity dependence, J. Hazard. Mater., 436, 10.1016/j.jhazmat.2022.129174 · DOI
  64. Li, 2020, Adsorption of congo red and methylene blue dyes on an ashitaba waste and a walnut shell-based activated carbon from aqueous solutions: experiments, characterization and physical interpretations, Chem. Eng. J., 388, 10.1016/j.cej.2020.124263 · DOI
  65. Liou, 2010, Development of mesoporous structure and high adsorption capacity of biomass-based activated carbon by phosphoric acid and zinc chloride activation, Chem. Eng. J., 158, 129, 10.1016/j.cej.2009.12.016 · DOI
  66. Liu, 2018, Modeling of subway indoor air quality using Gaussian process regression, J. Hazard. Mater., 359, 266, 10.1016/j.jhazmat.2018.07.034 · DOI
  67. Ma, 2022, Biomass derived nitrogen and sulfur co-doped porous carbons for efficient CO2 adsorption, Sep. Purif. Technol., 281, 10.1016/j.seppur.2021.119899 · DOI
  68. Mansouri, 2018, Elaboration of novel adsorbent from Moroccan oil shale using Plackett–Burman design, Chem. Int, 4, 7
  69. Mashkoor, 2020, Magsorbents: potential candidates in wastewater treatment technology–a review on the removal of methylene blue dye, J. Magn. Magn. Mater., 500, 10.1016/j.jmmm.2020.166408 · DOI
  70. Mbarki, 2022, Low-cost activated carbon preparation from Corn stigmata fibers chemically activated using H3PO4, ZnCl2 and KOH: Study of methylene blue adsorption, stochastic isotherm and fractal kinetic, Ind. Crop. Prod., 178, 10.1016/j.indcrop.2022.114546 · DOI
  71. Mehmood, 2015, Efficient removal of crystal violet and eosin B from aqueous solution using Syzygium cumini leaves: a comparative study of acidic and basic dyes on a single adsorbent, Korean J. Chem. Eng., 32, 882, 10.1007/s11814-014-0308-8 · DOI
  72. Mouni, 2018, Removal of Methylene Blue from aqueous solutions by adsorption on Kaolin: Kinetic and equilibrium studies, Appl. Clay Sci., 153, 38, 10.1016/j.clay.2017.11.034 · DOI
  73. Moussa, 2022, Optimization of ultrasound-assisted extraction of phenolic-saponin content from Carthamus caeruleus L. rhizome and predictive model based on support vector regression optimized by dragonfly algorithm, Chemom. Intell. Lab. Syst., 222, 10.1016/j.chemolab.2022.104493 · DOI
  74. Msaada, 2018, Industrial wastewater decolorization by activated carbon from Ziziphus lotus, Desalin. Water Treat., 126, 296, 10.5004/dwt.2018.22904 · DOI
  75. Onu, 2021, Comparative analysis of RSM, ANN and ANFIS and the mechanistic modeling in eriochrome black-T dye adsorption using modified clay, South Afr. J. Chem. Eng., 36, 24, 10.1016/j.sajce.2020.12.003 · DOI
  76. Panadare, 2014, Adsorptive removal of copper (II) from aqueous solution onto the waste sweet lime peels (SLP): equilibrium, kinetics and thermodynamics studies, Desalin. Water Treat., 52, 7822, 10.1080/19443994.2013.831789 · DOI
  77. Pandey S., Fosso-Kankeu E., Ramontja J. 2017. Efficient and rapid adsorption characteristics of templating xanthan gum-graft-poly (aniline) and silica nanocomposite toward removal of toxic methylene blue dyes. in 9th International Conference on Advances in Science, Engineering, Technology and Waste Management (ASETWM-2017), pp. 27–28. 〈https://doi.org/10.17758/EARES.EAP1117052〉. · DOI
  78. Park, 2017, Gaussian process regression (GPR) representation in predictive model markup language (PMML), Smart Sustain. Manuf. Syst., 1, 121, 10.1520/SSMS20160008 · DOI
  79. Peñafiel, 2021, Comparative adsorption of ciprofloxacin on sugarcane bagasse from Ecuador and on commercial powdered activated carbon, Sci. Total Environ., 750, 10.1016/j.scitotenv.2020.141498 · DOI
  80. Postai, 2016, Adsorption of rhodamine B and methylene blue dyes using waste of seeds of Aleurites Moluccana, a low cost adsorbent, Alex. Eng. J., 55, 1713, 10.1016/j.aej.2016.03.017 · DOI
  81. Prahas, 2008, Activated carbon from jackfruit peel waste by H3PO4 chemical activation: Pore structure and surface chemistry characterization, Chem. Eng. J., 140, 32, 10.1016/j.cej.2007.08.032 · DOI
  82. Ren, 2021, Study on adsorption of ammonia nitrogen by iron-loaded activated carbon from low temperature wastewater, Chemosphere, 262, 10.1016/j.chemosphere.2020.127895 · DOI
  83. Rezma, 2019, Microporous activated carbon electrode derived from date stone without use of binder for capacitive deionization application, Mater. Res. Bull., 111, 222, 10.1016/j.materresbull.2018.11.030 · DOI
  84. Rozada, 2005, Activated carbons from sewage sludge and discarded tyres: production and optimization, J. Hazard. Mater., 124, 181, 10.1016/j.jhazmat.2005.05.002 · DOI
  85. Sadhukhan, 2016, Optimisation using central composite design (CCD) and the desirability function for sorption of methylene blue from aqueous solution onto Lemna major, Karbala Int. J. Mod. Sci., 2, 145, 10.1016/j.kijoms.2016.03.005 · DOI
  86. Selmi, 2018, Physical meaning of the parameters used in fractal kinetic and generalised adsorption models of Brouers–Sotolongo, Adsorption, 24, 11, 10.1007/s10450-017-9927-9 · DOI
  87. Shahbazi, 2020, Low-cost activated carbon: characterization, decolorization, modeling, optimization and kinetics, Int. J. Environ. Sci. Technol., 17, 3935, 10.1007/s13762-020-02698-w · DOI
  88. Shahrokhi-Shahraki, 2021, High efficiency removal of heavy metals using tire-derived activated carbon vs commercial activated carbon: Insights into the adsorption mechanisms, Chemosphere, 264, 10.1016/j.chemosphere.2020.128455 · DOI
  89. Shamsuddin, 2016, Synthesis and characterization of activated carbon produced from kenaf core fiber using H3PO4 activation, Procedia Chem., 19, 558, 10.1016/j.proche.2016.03.053 · DOI
  90. Singh, 2020, Pre-treatment of petroleum refinery wastewater by coagulation and flocculation using mixed coagulant: Optimization of process parameters using response surface methodology (RSM, J. Water Process Eng., 36, 10.1016/j.jwpe.2020.101317 · DOI
  91. de Souza, 2022, Activated carbon of Coriandrum sativum for adsorption of methylene blue: equilibrium and kinetic modeling, Clean. Mater., 3
  92. Su, 2022, Significant enhancement of pesticide and organic dyes degradation by ion-exchange within a metal–organic framework, Polyhedron, 215, 10.1016/j.poly.2022.115651 · DOI
  93. Tahraoui, 2020, Prediction of the bicarbonate amount in drinking water in the region of Médéa using artificial neural network modelling, Kem. U. Ind.: Časopis kemičara i Kem. inženjera Hrvat., 69, 595, 10.15255/KUI.2020.002 · DOI
  94. Tahraoui, 2021, Predicting the concentration of sulfate (So42–) in drinking water using artificial neural networks: a case study: Médéa-algeria, Desalin. Water Treat., 217, 181, 10.5004/dwt.2021.26813 · DOI
  95. Tahraoui, 2021, Optimisation and prediction of the coagulant dose for the elimination of organic micropollutants based on turbidity, Kem. U. Ind., 70, 675
  96. Tahraoui, 2022, Modeling the organic matter of water using the decision tree coupled with bootstrap aggregated and least-squares boosting, Environ. Technol. Innov., 27, 10.1016/j.eti.2022.102419 · DOI
  97. Tahraoui, 2022, Predicting the concentration of sulfate using machine learning methods, Earth Sci. Inform., 1
  98. Tahraoui, 2022, Mixed coagulant-flocculant optimization for pharmaceutical effluent pretreatment using response surface methodology and Gaussian process regression, Process Saf. Environ. Prot.
  99. Tan, 2017, Insight into the adsorption kinetics models for the removal of contaminants from aqueous solutions, J. Taiwan Inst. Chem. Eng., 74, 25, 10.1016/j.jtice.2017.01.024 · DOI
  100. Tang, 2021, Extremely efficient and rapidly adsorb methylene blue using porous adsorbent prepared from waste paper: Kinetics and equilibrium studies, J. Hazard. Mater., 402, 10.1016/j.jhazmat.2020.123579 · DOI
  101. Tarbaoui, 2014, J. Mater. Environ. Sci., 5, 2163
  102. Teng, 2020, Performance and mechanism of methylene blue degradation by an electrochemical process, RSC Adv., 10, 24712, 10.1039/D0RA03963B · DOI
  103. Teong, 2021, Vatica rassak wood waste-derived activated carbon for effective Pb (II) adsorption: kinetic, isotherm and reusability studies, Mater. Today.: Proc., 42, 165
  104. Thangappan, 2016, Surface characterization and methylene blue adsorption studies on a mesoporous adsorbent from chemically modified Areca triandra palm shell, Desalin. Water Treat., 57, 21118, 10.1080/19443994.2015.1111818 · DOI
  105. Tran, 2017, Mistakes and inconsistencies regarding adsorption of contaminants from aqueous solutions: a critical review, Water Res., 120, 88, 10.1016/j.watres.2017.04.014 · DOI
  106. Üner, 2016, Adsorption of methylene blue by an efficient activated carbon prepared from Citrullus lanatus rind: kinetic, isotherm, thermodynamic, and mechanism analysis, Water Air Soil Pollut., 227, 1, 10.1007/s11270-016-2949-1 · DOI
  107. Wang, 2021, Effective adsorption of dyes on an activated carbon prepared from carboxymethyl cellulose: experiments, characterization and advanced modelling, Chem. Eng. J., 417, 10.1016/j.cej.2020.128116 · DOI
  108. Weber, 1974, Pore and solid diffusion models for fixed‐bed adsorbers, AIChE J., 20, 228, 10.1002/aic.690200204 · DOI
  109. Witek-Krowiak, 2014, Application of response surface methodology and artificial neural network methods in modelling and optimization of biosorption process, Bioresour. Technol., 160, 150, 10.1016/j.biortech.2014.01.021 · DOI · Paper page
  110. Wu, 2016, Hydrothermal synthesis of N-doped spherical carbon from carboxymethylcellulose for CO2 capture, Appl. Surf. Sci., 369, 101, 10.1016/j.apsusc.2016.02.022 · DOI
  111. Ye, 2022, Magnetic sludge-based biochar derived from Fenton sludge as an efficient heterogeneous Fenton catalyst for degrading Methylene blue, J. Environ. Chem. Eng., 10, 10.1016/j.jece.2022.107242 · DOI
  112. Yeganeh, 2006, Effect of raw materials on properties of activated carbons, Chem. Eng. Technol.: Ind. Chem. Equip. Eng. ‐Biotechnol., 29, 1247, 10.1002/ceat.200500298 · DOI
  113. Zhong, 2016, Multiparameter optimization of bromate sorption on anion exchange resin by a two-step statistical strategy: Plackett–Burman and Box–Behnken experimental design, Desalin. Water Treat., 57, 15524, 10.1080/19443994.2015.1072061 · DOI

Cited by

Sorted by citations

Metadata

Authors
Bouchelkia, N., Tahraoui, H., Amrane, A., Belkacemi, H., Bollinger, J.-C., Bouzaza, A., Zoukel, A., Zhang, J., & Mouni, L.
Affiliations
  • University of Béjaïa (DZ)
  • University of Constantine 3 (DZ)
  • Centre National de la Recherche Scientifique (FR)
  • Eau Environnement Limoges (FR)
  • Centre de Recherche Scientifique et Technique en Analyses Physico-Chimiques (DZ)
  • Newcastle University (GB)
  • University of Bouira (DZ)
Corresponding author
Tahraoui, Hichem
Venue
Process Safety and Environmental Protection
Publisher
Elsevier BV
Published
2023-02
Volume
170
Pages
513-535
ISSN
  • 0263-8762 (ISSN-L)
  • 0957-5820
OpenAlex
W4311302651
Cited by
124
References
1
Citations by year
2026: 20 · 2025: 36 · 2024: 37 · 2023: 31
FWCI
7.46
Type
journal article
Language
en
Open access
Locations
  • Process Safety and Environmental Protection (publishedVersion)
  • HAL (submittedVersion, cc-by-nc)
  • Newcastle University ePrints (Newcastle Univesity)
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Water Science and Technology › Coagulation and Flocculation Studies
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
Keywords
activated carbon, methylene blue adsorption, dye removal, low-cost adsorbent, chemical activation, adsorption kinetics, adsorption isotherms, adsorption thermodynamics, adsorption mechanism, Box-Behnken design, Gaussian process regression, bagging, dragonfly optimization algorithm, machine learning optimization, response surface methodology

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review