The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Prediction of surface roughness in extrusion-based additive manufacturing with machine learning
Abstract
Abstract Additive manufacturing (AM), also known as 3D printing, has been increasingly adopted in the aerospace, automotive, energy, and healthcare industries over the past few years. While AM has many advantages over subtractive manufacturing processes, one of the primary limitations of AM is surface integrity. To improve the surface integrity of additively manufactured parts, a data-driven predictive modeling approach to predicting surface roughness in AM is introduced. Multiple sensors of different types, including thermocouples, infrared temperature sensors, and accelerometers, are used to collect temperature and vibration data. An ensemble learning algorithm is introduced to train the predictive model of surface roughness. Features in the time and frequency domains are extracted from sensor-based condition monitoring data. A subset of these features is selected to improve computational efficiency and prediction accuracy. The predictive model is validated using the condition monitoring data collected from a set of AM tests conducted on a fused filament fabrication (FFF) machine. Experimental results have shown that the proposed predictive modeling approach is capable of predicting the surface roughness of 3D printed components with high accuracy.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Breiman, L. (2001) · Machine Learning · doi:10.1023/a:1010933404324 · Cited by 133,538
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
The Elements of Statistical Learning
Hastie, T., Friedman, J., & Tibshirani, R. (2001) · Springer Series in Statistics · doi:10.1007/978-0-387-21606-5 · Cited by 24,162
A decision-theoretic generalization of on-line learning and an application to boosting
Freund, Y., & Schapire, R. E. (1997) · Journal of Computer and System Sciences · doi:10.1006/jcss.1997.1504 · Cited by 20,466
Classification and Regression by randomForest
Liaw, A. I., & Wiener, M. C. (2007) · Cited by 18,594
Ridge regression: Biased estimation for nonorthogonal problems
Hoerl, A. E., & Kennard, R. W. (1970) · Technometrics · doi:10.1080/00401706.1970.10488634 · Cited by 9,648
Metal Additive Manufacturing: A Review
Frazier, W. E. (2014) · Journal of Materials Engineering and Performance · doi:10.1007/s11665-014-0958-z · Cited by 5,984
Support Vector Regression Machines
Drucker, H., Burges, C. J. C., Kaufman, L., Smola, A. J., & Vapnik, V. N. (1996) · Cited by 4,658
Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing
Everton, S. K., Hirsch, M., Stravroulakis, P., Leach, R. K., & Clare, A. T. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.01.099 · Cited by 1,469
Variable Importance Assessment in Regression: Linear Regression versus Random Forest
Grömping, U. (2009) · The American Statistician · doi:10.1198/tast.2009.08199 · Cited by 1,103
Surface roughness analysis, modelling and prediction in selective laser melting
Strano, G., Hao, L., Everson, R. M., & Evans, K. E. (2013) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2012.11.011 · Cited by 876
Ridge Regression: Biased Estimation for Nonorthogonal Problems
Hoerl, A. E., & Kennard, R. W. (2000) · Technometrics · doi:10.1080/00401706.2000.10485983 · Cited by 808
Turner, B. N., & Gold, S. A. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-02-2013-0017 · Cited by 770
A Review on Process Monitoring and Control in Metal-Based Additive Manufacturing
Tapia, G., & Elwany, A. (2014) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4028540 · Cited by 711
Wu, D., Jennings, C., Terpenny, J., Gao, R. X., & Kumara, S. (2017) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4036350 · Cited by 677
Self-citationNumerical optimization: theoretical and practical aspects
(2003) · Choice Reviews Online · doi:10.5860/choice.41-0357 · Cited by 614
Influence of process parameters on surface roughness of aluminum parts produced by DMLS
Calignano, F., Manfredi, D., Ambrosio, E. P., Iuliano, L., & Fino, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4688-9 · Cited by 469
A comprehensive evaluation of random vector functional link networks
Zhang, L., & Suganthan, P. N. (2016) · Information Sciences · doi:10.1016/j.ins.2015.09.025 · Cited by 465
Experimental study aiming to enhance the surface finish of fused deposition modeled parts
Galantucci, L. M., Lavecchia, F., & Percoco, G. (2009) · CIRP Annals · doi:10.1016/j.cirp.2009.03.071 · Cited by 404
Online Real-Time Quality Monitoring in Additive Manufacturing Processes Using Heterogeneous Sensors
Rao, P. K., Liu, J. (., Roberson, D., Kong, Z. (., & Williams, C. (2015) · Journal of Manufacturing Science and Engineering · doi:10.1115/1.4029823 · Cited by 292
Byun, H.-S., & Lee, K. H. (2006) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2005.03.001 · Cited by 205
In-situ monitoring of strain and temperature distributions during fused deposition modeling process
Kousiatza, C., & Karalekas, D. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.02.099 · Cited by 205
Surface roughness prediction using measured data and interpolation in layered manufacturing
Ahn, D., Kim, H.-C., & Lee, S. (2008) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2008.02.050 · Cited by 172
Asadi-Eydivand, M., Solati-Hashjin, M., Farzad, A., & Abu Osman, N. A. (2016) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2015.06.005 · Cited by 161
Srivatsan, T. S., & Sudarshan, T. S. (2015) · CRC Press eBooks · doi:10.1201/b19360 · Cited by 151
Roughness prediction in coupled operations of fused deposition modeling and barrel finishing
Boschetto, A., & Bottini, L. (2015) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2014.12.021 · Cited by 136
Predictive modelling of surface roughness in fused deposition modelling using data fusion
Wu, D., Wei, Y., & Terpenny, J. P. (2018) · International Journal of Production Research · doi:10.1080/00207543.2018.1505058 · Cited by 126
Self-citationReducing the surface deviation of stereolithography using in‐process techniques
Reeves, P. E., & Cobb, R. C. (1997) · Rapid Prototyping Journal · doi:10.1108/13552549710169255 · Cited by 110
Zhao, X., & Rosen, D. W. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.01.005 · Cited by 40
Cited by
Machine learning in additive manufacturing: State-of-the-art and perspectives
Wang, C., Tan, X. P., Tor, S. B., & Lim, C. S. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2020.101538 · Cited by 693
A review on machine learning in 3D printing: applications, potential, and challenges
Goh, G. D., Sing, S. L., & Yeong, W. Y. (2021) · Artificial Intelligence Review · doi:10.1007/s10462-020-09876-9 · Cited by 652
Machine Learning in Additive Manufacturing: A Review
Meng, L., McWilliams, B., Jarosinski, W., Park, H.-Y., Jung, Y.-G., Lee, J., & Zhang, J. (2020) · JOM · doi:10.1007/s11837-020-04155-y · Cited by 470
A review on voids of 3D printed parts by fused filament fabrication
Tao, Y., Kong, F., Li, Z., Zhang, J., Zhao, X., Yin, Q., Xing, D., & Li, P. (2021) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2021.10.108 · Cited by 443
Self-citationWu, Y., Fang, J., Wu, C., Li, C., Sun, G., & Li, Q. (2023) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2023.108102 · Cited by 440
Metadata
- Authors
- Li, Z., Zhang, Z., Shi, J., & Wu, D.
- Venue
- Robotics and Computer-Integrated Manufacturing
- Publisher
- Elsevier BV
- Published
- 2019-06
- Volume
- 57
- Pages
- 488-495
- ISSN
- 0736-5845 (ISSN-L)
- OpenAlex
- W2909096226
- Cited by
- 432
- References
- 29
- FWCI
- 21.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.